The reason the "corner first" was the method used in the first speed cube competition in early 80's is probably because the original Rubik's cube was packaged with a pamphlet introducing/explaining the cube on one side and show levels of success on the other. The levels were: Good: one face, Very Good: 2 faces, Master: all corners and Cubist: full solution. So for early Rubik's cube solvers, because of the pamphlet, doing the corners first was probably thought the way to go. I wish I could find a scan/picture of that pamphlet.
I learned to solve the cube when it came out in 1980. I remember that pamphlet. I also had "The Ideal Solution" which came out at the same time from the Ideal toy company. Supposedly it was Erno Rubik's original solution. That's the method I learned from. It employed a top layer (except for one edge), place then orient the bottom 4 corners, place the top and bottom layers' remaining edges, then place and orient the center edges. I don't see it discussed much these days. I tried other methods throughout the years, and end up going back to this method. I had a folder that had all my documentation associated with the cube, including that pamphlet and "The Ideal Solution". Unfortunately a flood in the 90's destroyed everything.
@@DrR0BERT That is still how I solve it too, but I didn't have a book to tell me how. But I haven't seen anyone solving the corners the same way I do yet. I got a book as a gift once, but didn't really care about the methods in the book. The one thing interesting from the book was to learn that middle pieces rotate on themselves. A rubik cube made of images instead of color, after solving, might not have the right orientation to match the image.
I’m developing my own method using God’s number. The main issue is learning 43,000,000,000,000,000,000 algorithms, but the payoff is gonna be incredible 😊
Honorable mention should be 8355. It's an amazing method for beginners, as it's largely intuitive with very few algs (arguably only need one), but also very simple. I've taught this to people first over LBL, with fantastic results
I was going to bring up 8355 as I just learned it about a month ago. Got my first cube in the 80s (still have it) and used to be able to solve in under 3 minutes. Never got into speed cubing but just started playing with my cube again and couldn’t remember all the algorithms I once knew so I started looking for an easier method of solving, just for my own personal enjoyment…8355 to the rescue! My best time so far is around 4 minutes and I’m hoping to get closer to 3 minutes with practice. No expectations of being competitive…just a nice way to pass the time when I have a few minutes to spare. If you haven’t tried 8355, give it a try…not having to memorize a bunch of algorithms really gives you the feeling of solving it rather than simply memorizing many possible solutions.
@@11am2search TH-cam, there are a few. It's amazingly simple. All those videos that say beginner method is the easiest are just wrong. The only problem with it is that if you want to be a speed cuber, it might slow you down. Maybe someone could analyze all the cases and make algorithms for the last 5 edge stage, but the attraction is that it is so easy that you don’t need algorithms or triggers.
I use blind method. Specifically 3 style method. But there is also Orozco. 3 style simplified, M2, U2, Old Pochman, EKA, and possibly more, but the fun is to memorize the cube and proceed to solve ir without seeing anything, I love it.
@@jonathansmith4947Blind solving isn’t that hard, I’m not an expert at it as I use old pochman for blind solves but you just have to memorize letters which you make words of. 2 letters is 1 word. You will just have to memorize a total of 20 letters. I use old pochman which I think is the easiest one. You just place a piece at the buffer (D) for edges and (V) for corners. For edges you can place your piece that needs to be solved next at the buffer (D) which is upper left. Then just do a T perm. Or place it at the Buffer C (upper low) and do a J perm. Parity is R perm. And for corners you place the piece at V (Lower right) and do a Y perm without the F moves at the beginning and the end. It isn’t as hard as it looks but it’s very satisfying to do and very impressive if you’re abled to do it. You can literally impress so many people with it which makes it more fun to do
Easiest to hardest (In terms of algorithms to learn) 1. Intuitive 69. DEVIL (Solve the entire cube using ~N PERM!~ 2. Beginner 3. Roux 4. CFOP 5. ZZ 6. Ortega (Solve a belt, solve the white SIDE, solve oll, and then solve the rest with 1 alg.) 7. Angels method (Solve EO, then solve the rest with 1 alg.) 8. Gods method *this is the method my cousin uses* (Solve everything with 1 alg.)
Very good video. I appreciate learning about the different methods. I have used CFOP since 2018. I originally learned CFCE in 2003 but didn't know till today what it was called. When I look back at the notation from the book I have, I am impressed I was even able to learn to solve the cube because it is very poorly written. It did help me get a basic understanding of how the cube could be solve, I figured out how to solve the first two layers intuitively, and then memorized two algorithms to solve the last layer.
the second method i learned besides LBL was actually Edge First (6 cross method) it only requires 1 algorithm that is a 4-mover, basically meaning you dont need to memorize any algorithm. Its super beginner-friendly, i learned it under 5 minutes and its surprisingly not bad, my pb is about 20 secs, but the tps was terrible, which means you can definitely sub 15 (or sub 10) with that
Oh that actually sounds quite interesting. But then don’t you have to learn how to do corner commutators? That’s a little tricky for beginners I thought
I actually made 2 of my own methods which actually work an they are the blocks method and FCOP. Blocks is based after petrus where first you make a 2x2 block, then you extend the block until F2L is finished then you do oll and pll. FCOP is what it sounds like. F2L, cross, oll, pll.
@@RubikTf Diiferent steps than anything previously made before? Just envision how you want it to work, and where you will need algorithms! Working on a solver specifically made for building algorithms, I can release it when I’m finished.
Hey im curious about something! There was a method an old cube ytber (forgot the name) used called zz-ct, do you know about this and how does it differ from zz?
From what I can tell it starts off the same as normal ZZ, until the last slot where you just insert the edge (like the ribbon method at 4:35). Because it’s ZZ, the yellow cross will be oriented so the ‘TOLS’ case is easier to recognise. I’m still not sure if it’s worth learning all those extra algs lol
Hey, I know this video was made BEFORE this happened but also an update on 1 look last layer, someone under the alias of "EDMARTER" has finished his road to full 1LLL and learned all 4000 algs. He has a complete ao50 and ao100 with it on his youtube (again, "EDMARTER").
I think my favorite method isn't mentioned here, except it's like petrus without the last cross on top. It's a "Y" shape of 3 edges and 4 corners that can be manipulated with U and R moves. (Sometimes with F and B setup moves). It's not a speedy method but very intuitive as it requires very few algorithms.
@@ScoochCubing Yeah, let me DM you! I have it laid out on an old website on a CD somewhere... but Rubik's had an edges first beginner's method on their website in 2004 when I first learned and I made shortcuts to the method to make it more viable from a speed perspective. I think I ended up with 3-4 algorithms total. I'd probably adapt it now I have a lot more experience but let me dig it up this week and send it your way, I think it'd be interesting to share it, as I think it could be useful as a beginner's method, though has some intuitive steps to it.
I created my own method. I call it Eecou method or frias method (it's my last name), it's actually similar to 4 different methods. It's similar to cfop, roux, zz and belt. Eeocu comes from it's steps. E stands for 1x3x2 EO Line. Or Basically one roux block and then an EO line Which is actually similar to zz, roux and belt. And make sure you start with the blue roux block. It's very important. And make sure yellow at bottom. Then the next step. Edge inserting. So basically you insert the rest of the yellow edges. Make sure if it's red or orange, after you insert it's edge, you fix the blue side, it's similar to cfop. Next step. Corner-Edge Inserting. It's like f2l. But make sure you end it with a flipped edge f2l case, which you can fix by doing a sledge hammer and then doing R U' R' U, R U' R' U2 and Inserting it and that step is similar to cfop. And then next step is 2 look OLL. And of course similar to cfop. And the reason you ended corner edge Inserting with a flipped edge f2l case, is because you won't get a dot, instead you could either get a line, hook or a cross. Then after you do oll. You use any algorithms to make it to a u perm or any other algorithms. That's why it has under 10 algorithms. And that is Eecou method. (I'll do an example solve in my channel)
This video is unfortunately so underrated! Amazing job in this video, I can tell a lot of time and effort went into researching this video. You just earned a sub :) Keep it up!
I use CFOP. If you’re a beginner, go for the layer by layer. If you’re a bit more advanced, you can learn Roux if you wanna be a little cool and unique, but I’d suggest CFOP because it’s safer and better right now
@@ScoochCubing thank you for the suggestion and I am requesting you say some tricks in cfop like in f2l and in pll. I am some what advanced in cube and i can solve a cube in 1 minute or less than a minute
@@hemakalyani7681 Oh nice, If you haven't already learnt full PLL I suggest doing that. Check out jperm.net the website has an algorithm trainer that helped me out a lot when learning algs
0:22 _"This method is very easy to learn, as you only need no memorize a minimum of __*_six_* algorithms."_ and then there's beginner Roux, which only requires *_two_* algorithms.
@@ScoochCubing when I was first learning, I was real stuck just on the second layer in LBL-honestly, I think LBL is just a bad way to start-but beginner Roux worked for me
@@ScoochCubing I enjoy it! I don't have all that much time to practice, so I mostly solve while doing other things and my times aren't that great. I recently found out that my right block was the worst step-I would have guessed my CMLL recognition, but nope. in some way, right block is closest to CFOP, and that's where my move count and execution time are the worst.
@@thoperSought Yeah whenever I try roux I struggle on the right block too. It’s because there are a lot of blind spots which make look-ahead hard. But it comes easier with practice
I'm really proud of myself for being able to solve the cube by myself, without looking for instruction. To be honest, I didn't have a lot of option, as I didn't have much access to internet 😅. It was 2008 or something, so congrats, 15yo me! 😂 Anyway, Corners First is the way I came up with and I did just like that, corners first, then top and bottom simultaneously, then rearrange the middle layer. Oh, I'm really proud of the algorithm I used to solve this parity. It was ugly, but worked 😅😂
15 year old me learned to solve by myself with my own method in 1981. No access to the internet then either, although the bookstores that year were full of books showing solutions. I held off looking at anyone else's method until I could reliably solve it on my own. I can't really remember exactly how I solved it then, but I'm sure it was pretty ugly (as was the cube I was using). I think it also took me a good 2-3 minutes. Now I'm learning Roux. Man, the cubes are so much better these days.
@piratedamon80 really nice, so it's a 40yo hobby, right? Amazing! 1981 was around the time rubik's cube came around? Congrats! I'm also trying Roux right now, it's interesting re seting the way to think solves
In first method you can do the last layer cross when u have the L pattern you can do (with the L in front and on the right) you do Fw R U R' U' Fw' you skip the line pattern enterily . I find out by mistake when learning LBL when I didn't know how to solve it with beginners method by my self with out a paper with algs for this method. Zry my English .. I hope it is good enough to understand me heh
Yeah I know, I just did double sexy because I was kinda showing beginners cfop and just doing sexy moves is simpler. And that’s awesome you found it accidentally haha
@@ScoochCubing also some are actually auf... Some are 1lll some are plls..... so subtract 3915+21+(6x3) algs from 7 quintillion (3915 for 1lll 21 pll 18 for aufs) And yeah M S and E moves can add more 9 to it so 3954+9=3963 algs are not even needed. So actually not that much(but still a lot)
Similar as programming method, basic, pascal, C++, then assembly language, somehow fastest method use assembly (machine language) that more like REVERSE scrambling without any orientation or method at all
Great video, but the most used method in blindfold is not 3-style, there are several methods starting from the simplest which is Old Pochman, up to the Eka, the Orozco, the M2/R2 method et cetera :) you can learn them from Jperm channel. There are also other classic methods no longer used such as Ortega and Watermann, in normal resolutions (no blind) :)
3 style is the best blind method (let’s not include 5 style, which no one has learned fully yet) - the other methods are too slow for someone to main them over a normal 3x3 method (also R2 sucks)
@Zl0oj holy guacamole man. I've been struggling with the transition tbh. I've been using cfop for about a year, but still average about 30 seconds... I'm hoping Roux will be my breakthrough but I can't find good tutorials😮💨
![The BEST Speedcubing Method? [CFOP/ROUX/ZZ] Comparison](http://i.ytimg.com/vi/QKK8J3JKWi4/mqdefault.jpg)
![The BEST Speedcubing Method? [CFOP/ROUX/ZZ] Comparison](/img/tr.png)
Very good video!
Good quality, nice voice, informative, entertaining, nice background music...
Thank you 😊
I don't hear background music
@@mihajlosreckovic5240im not a doctor tho...
The reason the "corner first" was the method used in the first speed cube competition in early 80's is probably because the original Rubik's cube was packaged with a pamphlet introducing/explaining the cube on one side and show levels of success on the other. The levels were: Good: one face, Very Good: 2 faces, Master: all corners and Cubist: full solution. So for early Rubik's cube solvers, because of the pamphlet, doing the corners first was probably thought the way to go. I wish I could find a scan/picture of that pamphlet.
I learned to solve the cube when it came out in 1980. I remember that pamphlet. I also had "The Ideal Solution" which came out at the same time from the Ideal toy company. Supposedly it was Erno Rubik's original solution. That's the method I learned from. It employed a top layer (except for one edge), place then orient the bottom 4 corners, place the top and bottom layers' remaining edges, then place and orient the center edges. I don't see it discussed much these days. I tried other methods throughout the years, and end up going back to this method.
I had a folder that had all my documentation associated with the cube, including that pamphlet and "The Ideal Solution". Unfortunately a flood in the 90's destroyed everything.
@@DrR0BERT That is still how I solve it too, but I didn't have a book to tell me how. But I haven't seen anyone solving the corners the same way I do yet. I got a book as a gift once, but didn't really care about the methods in the book. The one thing interesting from the book was to learn that middle pieces rotate on themselves. A rubik cube made of images instead of color, after solving, might not have the right orientation to match the image.
I’m developing my own method using God’s number. The main issue is learning 43,000,000,000,000,000,000 algorithms, but the payoff is gonna be incredible 😊
I came up with that first
At least the algorithms are shorter than N perm
Hahahahha
Your not the only one
R u serious
Honorable mention should be 8355. It's an amazing method for beginners, as it's largely intuitive with very few algs (arguably only need one), but also very simple. I've taught this to people first over LBL, with fantastic results
I was going to bring up 8355 as I just learned it about a month ago. Got my first cube in the 80s (still have it) and used to be able to solve in under 3 minutes. Never got into speed cubing but just started playing with my cube again and couldn’t remember all the algorithms I once knew so I started looking for an easier method of solving, just for my own personal enjoyment…8355 to the rescue! My best time so far is around 4 minutes and I’m hoping to get closer to 3 minutes with practice. No expectations of being competitive…just a nice way to pass the time when I have a few minutes to spare. If you haven’t tried 8355, give it a try…not having to memorize a bunch of algorithms really gives you the feeling of solving it rather than simply memorizing many possible solutions.
Are there any tutorials for this? Solving 3x3 is getting boring for me and I want to try some new methods
@@11am2 have you tried roux yet?
@@iesusdesus5704 yea but I have trouble remembering all the coll algs
@@11am2search TH-cam, there are a few. It's amazingly simple. All those videos that say beginner method is the easiest are just wrong. The only problem with it is that if you want to be a speed cuber, it might slow you down. Maybe someone could analyze all the cases and make algorithms for the last 5 edge stage, but the attraction is that it is so easy that you don’t need algorithms or triggers.
You forgot one more method: The iconic “I just peel the stickers off”
well try to do that on a stickerless cube lol
@@germartopasi4383 🤣
CPOF
@@isayaacorn cpop
@@germartopasi4383 💀
As a cfop user I'm very amazed on how many other unique ways to solve a 3x3
This might be the first video showing methods that actually shows the Watermann or Corners first method. Very cool.
I use blind method. Specifically 3 style method. But there is also Orozco. 3 style simplified, M2, U2, Old Pochman, EKA, and possibly more, but the fun is to memorize the cube and proceed to solve ir without seeing anything, I love it.
bld is goated
Respect.
I do sub 10's with cfop and can't even imagine a blind solve
@@jonathansmith4947Blind solving isn’t that hard, I’m not an expert at it as I use old pochman for blind solves but you just have to memorize letters which you make words of. 2 letters is 1 word. You will just have to memorize a total of 20 letters. I use old pochman which I think is the easiest one. You just place a piece at the buffer (D) for edges and (V) for corners. For edges you can place your piece that needs to be solved next at the buffer (D) which is upper left. Then just do a T perm. Or place it at the Buffer C (upper low) and do a J perm. Parity is R perm. And for corners you place the piece at V (Lower right) and do a Y perm without the F moves at the beginning and the end. It isn’t as hard as it looks but it’s very satisfying to do and very impressive if you’re abled to do it. You can literally impress so many people with it which makes it more fun to do
6:33 do a tutorial for ZB
It a challenge
And do full ZB
The video will be so many hours from the 4000+ algs😂
Easiest to hardest (In terms of algorithms to learn)
1. Intuitive
69. DEVIL (Solve the entire cube using ~N PERM!~
2. Beginner
3. Roux
4. CFOP
5. ZZ
6. Ortega (Solve a belt, solve the white SIDE, solve oll, and then solve the rest with 1 alg.)
7. Angels method (Solve EO, then solve the rest with 1 alg.)
8. Gods method *this is the method my cousin uses* (Solve everything with 1 alg.)
what LMAO your cousin is insane
those damn asians man.
Your cousin taught Erno Rubik how to solve his own cube
Eh n perm is easy
Zz is easy to learn eo but hard to do in real solves
this was awesome!
explained each one awesomely 😄
Very good video. I appreciate learning about the different methods. I have used CFOP since 2018.
I originally learned CFCE in 2003 but didn't know till today what it was called. When I look back at the notation from the book I have, I am impressed I was even able to learn to solve the cube because it is very poorly written. It did help me get a basic understanding of how the cube could be solve, I figured out how to solve the first two layers intuitively, and then memorized two algorithms to solve the last layer.
What?? 2003? I swear cfop wasn’t even a thing back then. That’s so impressive you did that haha
BEST VIDEO OF YOURS
thanks :)
the second method i learned besides LBL was actually Edge First (6 cross method)
it only requires 1 algorithm that is a 4-mover, basically meaning you dont need to memorize any algorithm.
Its super beginner-friendly, i learned it under 5 minutes
and its surprisingly not bad,
my pb is about 20 secs, but the tps was terrible, which means you can definitely sub 15 (or sub 10) with that
Oh that actually sounds quite interesting. But then don’t you have to learn how to do corner commutators? That’s a little tricky for beginners I thought
I'm trying to learn the ZB method and it's going pretty well so far. I am also going to practice cross+3 in inspection so that I only have two pauses.
Imagine if someone learn all these
Edit: schooch may have learnt all these
No… too many algs for my brain to handle
@@putian_ye its around 4000
Never knew there were so many methods! I only knew bout 3/4th of em lol.
I learned how to do the layer by layer today. I got it memorized pretty fast but now I’m gonna try getting better at it.
@Daroname 15 seconds is crazy my record is 64 seconds
I use APB method because i think it is faster so I will practice it very well
I actually made 2 of my own methods which actually work an they are the blocks method and FCOP. Blocks is based after petrus where first you make a 2x2 block, then you extend the block until F2L is finished then you do oll and pll. FCOP is what it sounds like. F2L, cross, oll, pll.
Currently working on my own method, hopefully it will be good enough to make its way onto lists like this!
How do you create a New method?
@@RubikTf Diiferent steps than anything previously made before? Just envision how you want it to work, and where you will need algorithms! Working on a solver specifically made for building algorithms, I can release it when I’m finished.
Thanks for summarizing all these Methods. Actually learning CFOP 🎲
What about APB method? It is defenitley more advanced than ZB method
Haha apb looks interesting, it was made more popular after I made this video though
Hey im curious about something! There was a method an old cube ytber (forgot the name) used called zz-ct, do you know about this and how does it differ from zz?
From what I can tell it starts off the same as normal ZZ, until the last slot where you just insert the edge (like the ribbon method at 4:35). Because it’s ZZ, the yellow cross will be oriented so the ‘TOLS’ case is easier to recognise. I’m still not sure if it’s worth learning all those extra algs lol
@@ScoochCubing yea I heard it was like a fuck ton of algorithms lol,
Also found the yter I used to watch, hes called colorfulpockets
I love this. Thanks for making it!
Thank you! 🙌
Thank you so much. Cool and informative video.
You missed the best method: F3L. It's the fastest, only not super easy to pick up
Explain
You mean 1L?
Super underrated great work!
Thank you!
For 1LLL u need to learn 1211 algs if u mirror them etc
I've gotten up to doing cfop for my f2l but I still do top layer the newbie way
You should start with learning 4-look last layer! It’s only a couple new algorithms and a lot faster
Good job on putting them in one video!
200++alg...300++alg....wow even to remembered 10 alg took me some time, the speedcuber contenders really is something else 🤯
Hey, I know this video was made BEFORE this happened but also an update on 1 look last layer, someone under the alias of "EDMARTER" has finished his road to full 1LLL and learned all 4000 algs. He has a complete ao50 and ao100 with it on his youtube (again, "EDMARTER").
Yeah I saw the video haha. Fair play to him
@@ScoochCubing Yeah. Apparently, he once learned 144 algorithms in 1 day!
WHAT!? 144 algs! OLL, PLL and COLL combined are only 120 algs haha
"no one is yet to learn 1lll" Edmarter: ...
Petrus is actually coated especially for OH but people just refuse to develop it
How
You uploaded your pre uploaded video as a live video
it's called a premier
@@ScoochCubing
Oh
I didn't know that
AMAZING!
I think my favorite method isn't mentioned here, except it's like petrus without the last cross on top. It's a "Y" shape of 3 edges and 4 corners that can be manipulated with U and R moves. (Sometimes with F and B setup moves).
It's not a speedy method but very intuitive as it requires very few algorithms.
CFCE lowkey seems cool
Can u please make a tutorial for ZB method,
I want to learn all 700 algorithms
Nah I know basically no zb haha. Watch max siauw’s tutorials
Can you please make a tutorial on CFCE method
Yeah sure, already have a few videos I need to make but I’ll do it eventually. Been wanting to for a while because it actually looks good
Can you make a video about all the Algs of 1LLL ?
I would for the memes but I think I would get too tired 200 algs in 😂
Make a Tutorial on Corners First and Petrus method pls
I have an edges first method that's not on this list. Sort of a high beginner's level method. I used it to ~40s before I jumped to CFOP.
Oh that actually sound like an interesting method haha
@@ScoochCubing Yeah, let me DM you! I have it laid out on an old website on a CD somewhere... but Rubik's had an edges first beginner's method on their website in 2004 when I first learned and I made shortcuts to the method to make it more viable from a speed perspective. I think I ended up with 3-4 algorithms total. I'd probably adapt it now I have a lot more experience but let me dig it up this week and send it your way, I think it'd be interesting to share it, as I think it could be useful as a beginner's method, though has some intuitive steps to it.
@@ScoochCubing I just joined your Discord, I'll share over there once I find it.
Oh wow that’s cool, so it was actually an ‘official’ method at some point haha. Surprised I never heard of it before
5:42 me too!
I created my own method. I call it Eecou method or frias method (it's my last name), it's actually similar to 4 different methods. It's similar to cfop, roux, zz and belt. Eeocu comes from it's steps. E stands for 1x3x2 EO Line. Or Basically one roux block and then an EO line Which is actually similar to zz, roux and belt. And make sure you start with the blue roux block. It's very important. And make sure yellow at bottom. Then the next step. Edge inserting. So basically you insert the rest of the yellow edges. Make sure if it's red or orange, after you insert it's edge, you fix the blue side, it's similar to cfop. Next step. Corner-Edge Inserting. It's like f2l. But make sure you end it with a flipped edge f2l case, which you can fix by doing a sledge hammer and then doing R U' R' U, R U' R' U2 and Inserting it and that step is similar to cfop. And then next step is 2 look OLL. And of course similar to cfop.
And the reason you ended corner edge Inserting with a flipped edge f2l case, is because you won't get a dot, instead you could either get a line, hook or a cross. Then after you do oll. You use any algorithms to make it to a u perm or any other algorithms. That's why it has under 10 algorithms. And that is Eecou method. (I'll do an example solve in my channel)
ZB = scawwy
also 302 + 472 = 774, not 775
6:28 last layer king learned them all
mehta and heise are also pretty interesting
super nice Video ❤️🔥
This video is unfortunately so underrated! Amazing job in this video, I can tell a lot of time and effort went into researching this video. You just earned a sub :)
Keep it up!
Pog. Wrm 2021, Tornado v2 or 11m duo?
i actually bought one of them lol
Which method do you suggest and which method you perform to solve Rubik's cube
I use CFOP. If you’re a beginner, go for the layer by layer. If you’re a bit more advanced, you can learn Roux if you wanna be a little cool and unique, but I’d suggest CFOP because it’s safer and better right now
@@ScoochCubing thank you for the suggestion and I am requesting you say some tricks in cfop like in f2l and in pll.
I am some what advanced in cube and i can solve a cube in 1 minute or less than a minute
@@hemakalyani7681 Oh nice, If you haven't already learnt full PLL I suggest doing that. Check out jperm.net the website has an algorithm trainer that helped me out a lot when learning algs
O
Wait a minute, isn't belt method, cfce, ribbon and zb method just *"Deconstructed CFOP?"*
Yeah you can think of them as variants of CFOP
please tell more rubiks cube magic trick
Can u make a full tutorial on ZB method
what about mehta?
Didn’t know that much about it
ah understandable
Update: an youtuber named EDMARTER learned full 1 look last layer
Yeah I’ve seen that haha, incredible. Would never have expected someone to actually do it
Hi can u make a easy tutorial on cfop
I have one! I made it last year I think. I tried to make every step as clear as possible so it’s really beginner-friendly
0:22 _"This method is very easy to learn, as you only need no memorize a minimum of __*_six_* algorithms."_
and then there's beginner Roux, which only requires *_two_* algorithms.
Haha I forgot about that. Roux is actually sometimes taught as the beginners method
@@ScoochCubing
when I was first learning, I was real stuck just on the second layer in LBL-honestly, I think LBL is just a bad way to start-but beginner Roux worked for me
@@thoperSought Oh nice! It’s really cool how different methods work for different people. As a CFOP solver, roux looks a lot more interesting
@@ScoochCubing
I enjoy it!
I don't have all that much time to practice, so I mostly solve while doing other things and my times aren't that great.
I recently found out that my right block was the worst step-I would have guessed my CMLL recognition, but nope. in some way, right block is closest to CFOP, and that's where my move count and execution time are the worst.
@@thoperSought Yeah whenever I try roux I struggle on the right block too. It’s because there are a lot of blind spots which make look-ahead hard. But it comes easier with practice
Please teach all these methods
I liked the cfce method
Can you make the full tutorial on it
I was thinking about doing that
I'm really proud of myself for being able to solve the cube by myself, without looking for instruction. To be honest, I didn't have a lot of option, as I didn't have much access to internet 😅. It was 2008 or something, so congrats, 15yo me! 😂 Anyway, Corners First is the way I came up with and I did just like that, corners first, then top and bottom simultaneously, then rearrange the middle layer. Oh, I'm really proud of the algorithm I used to solve this parity. It was ugly, but worked 😅😂
(Insert Obama meme here)😂😂😂😂
That's really impressive that you actually figured it out yourself, good job haha
15 year old me learned to solve by myself with my own method in 1981. No access to the internet then either, although the bookstores that year were full of books showing solutions. I held off looking at anyone else's method until I could reliably solve it on my own. I can't really remember exactly how I solved it then, but I'm sure it was pretty ugly (as was the cube I was using). I think it also took me a good 2-3 minutes. Now I'm learning Roux.
Man, the cubes are so much better these days.
@piratedamon80 really nice, so it's a 40yo hobby, right? Amazing! 1981 was around the time rubik's cube came around? Congrats! I'm also trying Roux right now, it's interesting re seting the way to think solves
Nice, you should go over YRUru method
ZB is exactly what I'm looking for my journey of a guide on how to solve a cube in 3-1 looks
In first method you can do the last layer cross when u have the L pattern you can do (with the L in front and on the right) you do Fw R U R' U' Fw' you skip the line pattern enterily . I find out by mistake when learning LBL when I didn't know how to solve it with beginners method by my self with out a paper with algs for this method. Zry my English .. I hope it is good enough to understand me heh
Yeah I know, I just did double sexy because I was kinda showing beginners cfop and just doing sexy moves is simpler. And that’s awesome you found it accidentally haha
Pog,u told many methods that I didn't knew
What was the cube in this video?
The RS3M 2020. Great budget cube
@@ScoochCubing Oh nice! I was planning on buying it but do you think the maglev version is better?
APB?
What is the difference between ribbon and zzct?
ZZCT is like a combination of ZZ and Ribbon
@@ScoochCubing oh ok
Love your content
The best method:
Learn 43 quintillion algs
Or 43 quintillion/6(If you are colour neutral)
Oh yeah you divide by six. Never thought of that. That’s easy then. (not really lol)
@@ScoochCubing still more than 7 quintillion
Yes
7000000000000000000
@@capabilitymaster4034 Hahaha
@@ScoochCubing also some are actually auf... Some are 1lll some are plls..... so subtract 3915+21+(6x3) algs from 7 quintillion (3915 for 1lll 21 pll 18 for aufs)
And yeah M S and E moves can add more 9 to it so 3954+9=3963 algs are not even needed. So actually not that much(but still a lot)
Nice video and useful too
Thanks, hope it helped 🙌
This is a very well made and informative video!
Can you tell us which is faster on your experience
Out of the main ones cfop is generally the fastest
Let’s not forget about the fool’s which is a method when you’re randomly turning the pieces until they fall in their correct spaces
Objectively the best method. No algs needed
do the tutorial of ZB method i wanna learn the 4000 algs 😁
Haha imagine 😂
I do layer by layer f2l, then 2 look oll and 2 look pll. Gonna start work on actual f2l soon. Wish me luck!
Similar as programming method, basic, pascal, C++, then assembly language, somehow fastest method use assembly (machine language) that more like REVERSE scrambling without any orientation or method at all
Someone managed to actually learn 1LLL by now :)
I know!! I didn't think that would ever happen. That guy is insane
Im just thinking of learning all those methods. Then combine them for what ever situation is the best.
2045 world champion right here
I love the video!!
My method when i was young was unwrapping stickers. Strange you didnt mentioned this well known method.
Damn I forgot about that one. My bad
wow, you're using the same V perm alg as I do
What about the OOPS method, OLL, OLL, PLL skip
Wow amazing video, saved!
Thank you!
Hey I have being searching for zz tutorials can you please make a zz tutorial
Great video, but the most used method in blindfold is not 3-style, there are several methods starting from the simplest which is Old Pochman, up to the Eka, the Orozco, the M2/R2 method et cetera :) you can learn them from Jperm channel.
There are also other classic methods no longer used such as Ortega and Watermann, in normal resolutions (no blind) :)
3 style is the best blind method (let’s not include 5 style, which no one has learned fully yet) - the other methods are too slow for someone to main them over a normal 3x3 method
(also R2 sucks)
3style is the most used blind method for anyone who wants to be good at blind solving..
Nice video
nice video 🙃
Thanks!
Make a tutorial of ZB pls
Im developing a method which consists of cross f3p vhls coll but while doing coll you cancel into zbll. Idk how to do it but ok.
please full tutorial on zb methor (4k algs one)
Haha probably not. I don’t even know the method. There’s some other tutorials out there :)
nowadays zb is probably the best methods
zbll actually uses 493 algorithms because pll is included in zbll
Bro come on
“Hey I’ve started learning zbll”
“Oh cool how many do you know so far?”
“21”
😐
@@ScoochCubing its still part of the algs set smh
Just switched from cfop to roux 🗿
I've been condidering it lately....what are your thoughts on the swithing experience so far?
@The-a-nt7qy since I was a beginner I understood roux easily since I was having a hard time with cfop now I'm pretty good pushing sub 20
@Zl0oj holy guacamole man. I've been struggling with the transition tbh. I've been using cfop for about a year, but still average about 30 seconds... I'm hoping Roux will be my breakthrough but I can't find good tutorials😮💨
I bet you guys that *IF* he did the zb tutorial it's gotta be like 15 hours AT LEAST and it gotta be in parts you know
what is the best method to sovled bro
and tutorial plz
Want Roux method ✨
Blindfolded method is solving all edges and next solving all corners
Or the other way around