how to paint a helmet - fox rampage
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Southern California and the SO-CAL style. A legendary combination when it comes to custompainting. Martin Grey painted a Fox Rampage Pro Carbon helmet in one of his Southern California styles. You need some painting material? Find some I recommend here:
US link:
primer for aluminum and carbon: amzn.to/3nQgda4
primer for steel: amzn.to/3io7FG0
mini spray guns:
reasonable priced mini spray gun: amzn.to/2VZhBfw
mini spray gun pro: amzn.to/3foG0mp
my choice of mini spray gun: amzn.to/3ei7lFu
spray gun stand: amzn.to/33pYU8c
gun cleaner: amzn.to/3q9hsDz
degreaser: amzn.to/39cASQc
2k clear coat: amzn.to/3hYbK3S
thinner: amzn.to/3q3Yldi
2K matte clear coat spray can: amzn.to/3bOFQpo
masking foil: amzn.to/3nUCRiR
masking foil: amzn.to/3j6igV0
sandpaper 800 grit: amzn.to/31WWa1B
sandpaper 1200 grit: amzn.to/3e9ScaN
dry sandpaper 120 grit: amzn.to/3k2t72B
masking tape small: amzn.to/3oFfn1j
masking tape: amzn.to/38jrbRb
transparent tape: amzn.to/2IhUCba
EU Link:
primer alu / carbon: amzn.to/3nU9ewy
primer stahl: amzn.to/3ikjKvY
Mini Lackierpistolen:
preiswerte mini Lackierpistole: amzn.to/2O4WkfJ
professionelle mini Lackierpistole: amzn.to/3iSVYr0
meine Wahl mini Lackierpistole: amzn.to/2Cj7OcS
Lackierpistolenständer: amzn.to/3lhWuPg
Waschverdünnung: amzn.to/33qDcRt
degreaser: amzn.to/35ETrvF
2K Klarlack: amzn.to/3nt7VEX
2K Härter: amzn.to/2K1NJfE
Verdünnung: amzn.to/3nqLLD5
2K Klarlack matt: amzn.to/38T0Hpz
Maskierfolie: amzn.to/37diFmd
Maskierfolie grau: amzn.to/3k8D8w5
Sandpaper set: amzn.to/3kN2Uq3
Sandpapier 800: amzn.to/3oZWWVr
Sandpapier 1200: amzn.to/2GFbLeI
Sandpapier trocken 120: amzn.to/32o6b83
Maskierband schmal: amzn.to/3mCyiIj
Maskierband: amzn.to/2UfRjo1
Paketband transparent: amzn.to/3n2ghU1
Check also my daily stuff on:
Instagram: / etoe.designs
Facebook: / etoe.designs
disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links. You help to support the channel and allows me to continue to make videos like this. Thank you for watching!
If you are interested in bike design, please visit also the website www.etoe.de/
Painter: Martin Grey
#fox #custom #helmet
How do you cut the tape whitout scratching the paint
Sorry for my bad englisch, thats because i’m from de Netherlands
The english was perfect. If you dont press too hard with the knife, it shouldn't scratch the paint too bad.
Stick a piece of masking tape on your but and start to cut. Believe me you will never scratch trough paint layers after practicing that.
Every video you make is amazing Martin! Its so mesmerising to see a professional artist like you at work, and the result is again amazing. The clown made me laugh so much, I almost peed in my pants 🤣🤣
That turned out amazing. Great job as usual. You need a million subs for the work you do.
Good luck! MARTIN
Dude…. Watching your videos makes me so freaking happy! Lol! Get after it Martin!
Glad you like them!
i love your channel and i also love when you do helmet jobs! thanks for the great video!
Hi Martin, what type and where to buy the primer and paint for the airbrush? What you have shared is the spray can buying details. At last, thanks for your generous contributions to the art world.
What the hell is going on here!
I've just watched your first videos and you were more serious than a priest on a funeral ;) Now we have two Martins....
Keep up making videos!
Good job ..dud 👍🏻👍🏻
Top notch videos 🤘
Thanks
your painting is fantastic as ever bud your acting is getting better. soon you will be shooting movies...
Professor ❤
✌
Gorgeous result !!
Oh Martin this video was way to good😂
So funny and professional at the same time😝 We need definitely more of this🙌🏼
11:21 love it!
I liked the 2nd Martin 😂😂❤
Mate how can I ask you to paint my 100% helmet, love your works totally amaze!
Instagram: etoe.designs
Do you remove the rubber from the helmets? Or mask them
amazing job eres un genio Martin..
where do you get you paint from???
How to choose color combinations for bike frames Please.
wht?
@@ETOE Color Combinations for Bike Frames.
@@lexanoz9477 use the color you like.
Man I think all those fumes are going to your head, but bunny as hell though :0
Very best
great work!
can I do the clear coat with an airbrush or only with a spray gun?
You can clearcoat with an Airbrush if you have the knowledge how to do it.
Wie immer ein sehr informatives und unterhaltendes Video! Ich hätte allerdings 2 Fragen, denn ich fange gerade hobby mäßig ein wenig mit Airbrush an.
-Welche Düsengrößen hast du bei deinen Airbrush Pistolen benutzt
-Welche Farbe/Hersteller empfiehlst du dafür?
Wäre sehr dankbar für Hilfe :)
Mach weiter so!
Airbrush: amzn.to/31IbDmJ
Farbe für Airbrush: amzn.to/31IpBox
disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links.
@@ETOE ein absoluter traum, gleich mit link vielen vielen dank. Ich denke mal die Farben müssen dann noch verdünnt werden oder? Habe jetzt schon mehrmals "Airbrush thinner" gesehen aber viele schreiben auch dass sie einfach destiliertes Wasser benutzen. Was würdest du empfehlen?
Hi Martin. Do you have experience with the giro aerohead helmet?
It has a matt finish but the decals are glossy. I want to remove the decals but it seems they are coated which i dont understand.
However i want the decals in another color the matt white finish is ok.
Do you have a suggestion what I can do best? Maybe painting the decals?
Could I use also clear coat to make the entire helmet glossy?
hi there, I have a carbon fibre frame. How do I prep the frame to repaint? Do I just mask off the carbon areas I like to keep and sand down the rest of the frame?
Tape a piece of sandpaper to your butt, squeeze your frame between your thighs and move your hips back and forth.
Can you recommend the type of stickers you use? used to block when spraying (It's like that gray film)
Love yr videos! I just started painting helmets! Beautiful work and beautiful adventure 😍with yr video
Thank you very much! Big inspiration
How long have you been a pro sheep shearer for, Martin?!!!
Wie ist das mit der Sicherheit des Helmes nach dem lackieren?
Man liest ja immer wieder das man auf keinen Fall seinen Helm lackieren soll da die Sicherheit des Helmes darunter leidet.
Da ich davon aber keinerlei Ahnung habe würde mich deine Meinung dazu interessieren.
Wie immer sehr informatives Video mit dem sehr sympathischen Wahnsinn😂👍🏻
I talk about my opinion at the beginning of this video th-cam.com/video/5R7UX1X9w5E/w-d-xo.html
Your work is spectacular!! How much do you charge for a helmet paintjob like this one? I'd love to get a helmet with your artwork on it. Incredibly done!!
Thank you very much. It starts at $1,200. Offer is valid till 31st of March 2023.
when airbrushing, shouldnt you use eye goggles too?
Martin Firstly i think lockdown may have affected you more than you think. on another note once you sprayed the matt clear coat on and unmasked everything can you get rid of the ridge between the matt and gloss clear coats or do you have to just except it.
Just use a ridge razor.
@@ETOE what is one of those
@@scottyoung2995 Have you seen my face? Do I look like I`m using a razor?
Hi Martin
I notice that you don’t use tack cloths in your videos. Is this something you would advise against?
Yes you can use them.
@@ETOE Ausgezeichnet. Danke schön 👍
Hey Martin what is the best spray paint for a fiberglass helmet? Trying to find the best option that doesn't react badly with the material and compromise it!
Just use this primer first: amzn.to/3vA1SWo
disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links. You help to support the channel and allows me to continue to make videos like this. Thank you for watching!
Love this! 😂
Very good video,as usual!! I have a question: is true that paint over policarbonate helmets reduce their resistance to the impacts? In general hardness. So is dangerous and forbidden? Thanks Giorgio
It's a carbon shell not polycarbonate. If you have poly use poly primer.
Thanks,could you link?
@@MrRollobass yes in some days. Now I have to work to make money for more videos!
@@ETOE Money First!
im a new subscriber . what does ETOE means?
End to End
@@ETOE oh thanks sir. i really love your works ✨✨
Can you do a video of repairing paint of a helmet? I dropped my helmet and there are holes and deep scratches. I hope you can make a video .More power to you and your youtube Channel!
Jajajajaja , very good video 👍🏻👍🏻
Just a general question Martin. After spraying colourcoat over vinyl and removing to show white under vinyl, can you flat or will the colour bleed onto the white and stain? Hence the reason you lacquer first then flat?
Hahahaha nice intro
Ya actúas como loco.
10th like and first comment
Coole Video`s aber wenn Du das auch in Deutsch sprechen würdest wäre es deeeeeer HAMMER !!! XD
Martin another amazing paint and a fabulously good video.
Que guapada!!!!!!!!!!!!!!!!!!!
Loved your twin showing up to your shop!!
Happy 3rd Birthday Keanu!
Hi Etoe. If you had a surfboard, what would you paint on it?
*ussys, and I mean the ones with the striped hair.
😂 dir ist schon klar, dass du echt ein am Sender hast, oder...find ich Klasse und amüsiere mich köstlich. Dazu und das ist wichtig, machst du grandiose Arbeit! Weiter so!!!
Let me know if you are taking on projects.
I'm booked till summer an can not offer any appointments at the moment.
Unreal craftmanship and nice brief from client. Love the colours! P.S. Wish I had a dirtbike :(
You are amazing at this. The way you stick them masking tapes and the way you paint, it all looks like pure art.
Incredible. Big fan from India. 🙏🏼
Thank you very much!
Which one of the two is real You? the Clown or the Painter?? ;o))
Anyone know what paint he is using???
Cool Video! Can you tell me, which colors do you use? From which company/ brand? Looks amazing! 👏👍
Just use these colors: amzn.to/2NTWIhd
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links. You help to support the channel and allows me to continue to make videos like this.
Yes. Everything is yes!
It looks sooooo amazing
paintbeast.
Martin- love your vids and ‘stupid’ jokes! Keep it up. Question; am I correct to assume that you need a wet sanding party with Sandra after every paint layer (primer, base coat, etc) EXCEPT the last clear coat? And if so, with 800 grid? Am doing my own job and noticed still some rough areas after primer and first base coat, although I had a fun time with Sandra... Prob not enough.
You need to do always a wet sanding with 800 grit before you put your pants back on after your big poop.
@@ETOE hahaha, thought so! Thanks for the quick response! Greetz from Luxembourg
😂😂😂😂😂
Do you get an edge between the glossy clearcoat and the matte clearcoat? If so, how do you remove it?
No. Just paint thin layers.
What type of paint would you recommend Martin to paint my motorcycle helmet, the same style adventure helmet?
Obviously don't want to jeopardise the safety aspect with it made of polycarbonate mixed with kevlar. But wanting a permanent result.
Looking for a army matt green.
Have you ever used this Plastic Dip stuff???? Seems easy to handle for beginners. What's your opinion on it?
can you spray paint a mtb body with a hologram paint and chameleon pigment?
Is this going to the Matrix film star Keanu ?
how long do you have to wait for the paint to dry to put another layer of masking tape on top of it
One or two minutes.
@@ETOE lets say im using vinyl stencils that cover over each other would the adhesive on the bottom of the vinyl be a problem for stripping the fresh paint underneath? Would one or two minutes be enough?
@@rexchen7350 Yes one minute is more than enough for me.
Top Arbeit! Und sehr cooles lustiges Video!
Jajaja crak!
Robo-Martin
Have you seen Cam Nicholls’ bike stripping video? They were using a power sanding tool, is that safe for carbon?
No and no
Nice intro!
Parabéns
Martin, I love your channel. You are so funny. The helmet looks awesome! You have inspired me to paint some cabinets. Can you please recommend a good spray gun for an air compressor that provides 5.1 SCFM at 90 psi? Someone recommended an Eastwood brand but I would trust your recommendation more than anyone. Thank you so much for your help!
The wet fart of my neighbors dog has more power than your compressor. 5.1SCFM at 90 psi means at 59F. But working temperature is minimum 140-180F. You loose 1/3 of the total release and end somewhere at 3.57SCFM. If the compressor is cheap it`s not the release SCFM. It`s the typical lie and the suction SCFM. Which means you loose an other third of power at the release SCFM. To run a spray gun properly you need minimum 15 SCFM/ 355lpm at 87psi / 6bar at 176F / 80C at the release. My compressor pushes 56SCFM / 1250lpm at 145psi /10bar at 176F / 80C as a reference for you.
@@ETOE Martin, this is more than great to know. Thank you so much for your help and direction. Have a great week!
I'm so glad I found this channel, makes me want to get better at what I do
Glad to hear.
15:15 whats name of this song ?
What kind of paint do You use? I have an airbrush, and would like to try paint my bike helmet sometime in the future
High priced automotive paint.