Best Practices when using Mayco Stoneware Crystal Glazes!
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2024
- Learn how to open, apply, and store Mayco's Stoneware Crystal Glaze, SW-179 Muddy Waters.
Fired Results can be found here: / 10158444479262986
Resources:
Searchable Glaze Combo Gallery: www.maycocolors.com/glaze-com...
Mayco Mud Room Society on Facebook: / maycomudroomsociety
Find your closest Mayco Distributor: www.maycocolors.com/distribut...
Information about Food and Dinnerware Safety: www.maycocolors.com/resources...
Contact Technical Support:
technical@maycocolors.com
614-675-2031 - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] แบดมินตันชาย วิว กุลวุฒิ(ไทย) vs Kenta Nishimoto(ญี่ปุ่น) รอบ 16 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/kaQRLljJkSI/mqdefault.jpg)
so you have to break it up and then shake it up! transfer it into a plate for easy application. GREAT Instructions..
got it! Thanks!
Wow,that turned out amazing.
These are extremely helpful!❤❤❤
I am definitely buying this one!
I loved that seal much more than the one currently used. I wish they would seal them again with the former seal. Because the new seal can be messy, not coming off completely or tearing sticking stubbornly onto the pint.
We just recently switched back to our normal seals. We had to switch temporarily due to supply shortages.
Great instructional video, still would be nice to have a picture of how that bowl came out though. I'm very curious.
Send us an email! callen@maycocolors.com
Here is the final result: facebook.com/MaycoPotters/photos/oa.577684645943545/10158444479262986
I think the picture be added at the end of the video too!
I AM ABOUT TO TRY BLUE HYDRANGEA ... THIS WAS VERY HELPFUL ... TYVM ...
Have you done the blue hydrangea? Wondering if you have to put the SW-207 Chambray base coat or you can just apply the blue hydrangea to your piece?
Love that glaze!
Me too!!! Palray for me
In my studio, we store these glazes upside down. They're easier to mix when we're ready to use.
Yes! This is a great way to store crystal glazes!
So I tried this and after I put 2-3 Coats of muddy waters on the inside like shown the glaze cracked when it dried fully? Will it still work or do I need to start over or apply another coat? It’s also hard to find the crystals. What happens when the crystals are gone, etc. i see you scoping them from the plate, will it be like this every time.
The cracks will smooth out during the firing, but it does sound like the application is very heavy! If you are having a difficult time accessing the crystals, we recommend to scoop the glaze onto a play like we have in the video here.
Like the video, would have liked to see the end result. I have seen in the comments to email, but probably easier to just show the pic of it. I assume the base coat was leather and then muddy waters over the top. On the plate which is white opal and cobalt wash, did you make the lines (chattered carved etc, or was this a result of the glaze running?
We added the final results to the thumbnail, but have been unable to edit the video to add it directly. Sorry for the confusion. As seen in the video, we applied 3 coats of Muddy Waters to the bowl, no leather was applied. The lines on the plate were made with slip.
Here is the final result: facebook.com/MaycoPotters/photos/oa.577684645943545/10158444479262986
Links are dead.
But the first photo shows like he’s going to use a pattern on it different places, but you only use one glaze what happened to the others
5 layers...beautiful but it runs ...so it will stick to the kiln?
Not if you apply it to the top 1/2 of your piece 😉
should crystals be used on food dishes, I read something about only to be used on decorative wear?
That is typically the rule for earthenware, but it is okay with stoneware.
I’ve recently bought Muddy Waters and this is very helpful. I fire to a cone 8 and will only apply this glaze to top third of the pot, would this be okay?
Sorry another question, would the matte & ice Mayco’s be okay at cone 8? Thank you :)
That should be fine! All of our Stoneware glazes can be fired up to cone 10. Check out our website for cone 10 reduction results so you can get an idea how they perform at higher temperatures.
@@MaycoColors thank you so much, looking forward to trying out the glazes, so many gorgeous colours
Are you using porcelain?
Yes, Id like to see what the end result as well
It is linked in the description.
Can I use jungle crystal glaze on stoneware and fire up to 1200?
You can, but expect a change in color and performance! Check out the cone 6 results on our website and be sure to join Mayco Mud Room Society to see and discuss pur products with other customers!
What glazes are on the plate you are using?
White Opal and Cobalt wash!
Mine was way thicker. Like glue. I added a bit of water. Fired to cone 10. Came out with no gloss . Help!
Please contact our technical team with any issues: www.maycocolors.com/contact/
What are the crystals made of?
Various raw materials that are fired and then broken up and added to the wet glaze.
how many celcius should my oven be for the glaze to work please???
Our stoneware glazes require a minimum of 1196C
Has to be applied to Bisque fired clay ? Confusing , I know some of your glazes can be applied to greenware.
It's a Cone 5/6 mid-fire glaze, so you apply it to bisque-fired ware.
Ahhh. Guess I didn’t put on enough glaze. Came in like your 1 coat.
Thanks for this. Very helpful
Question: The use of "I'm going to go ahead and..." is super distracting.
Is there a picture of this bowl after its been fired?
Send us an email! callen@maycocolors.com
@@MaycoColors Not a good response. Picture in comment was promised
@@bkuehlhorn8766 we are unable to add pictures to comments on TH-cam, sorry.
@@bkuehlhorn8766 fired results can be found here: facebook.com/MaycoPotters/photos/oa.577684645943545/10158444479262986
@@MaycoColors this link leads to your Facebook page, not the bowl. Where can we see the finished product? Also, I’m confused. Is this just muddy waters, or are you also using white opal and cobalt wash?