I did and changed it to iso 46. The only reason I used that was someone else changed theirs to that. That is the only info I could find on what weight.
Looks pretty nice! I like that it has the hydraulic thumb and side swing. Maybe you could bolt a 2" receiver hitch from harbor freight under the rear end. If there is clearance when you spin the chassis. Then weld up a bracket to slide in the hitch that will accept small suitcase weights. By the way what's the distance between the joy sticksat seat level?
That’s a good idea. I actually have a 2 inch bolt on receiver. I may try that. The pilot controls are just above the arm rests. It’s very comfortable to sit there and operate it with your arms on the arm rests. I’ll let you know on the measurement.
I'd be curious to know more about that cooling remedy as I didn't notice any fans. Pilot controls look comfortable, too bad the single pump set up keeps from really taking advantage of them though.
I am not sure what they did to it either. There are no fans. Pilot controls are great. The swinging boom is there if you need it but I do not use it very often as it’s easier to just swing the entire cab.
My brother just pointed out to me that its MAX flow from the aux pump is listed as 1.51 gpm (max pressure is 2,320 psi)... that seems EXTREMELY low. The Bobcat E10 is rated to 5.3 gpm (max 2,756 psi) and U10 is about 5.5 gpm. 🤷 I'm curious what the swing spin is (RPM) and left/right boom swing as AGT lists neither.
www.agtequipment.com/?gad_source=1&gclid=CjwKCAjwi_exBhA8EiwA_kU1MndB2aEPpi_Fd_wKN2_TOaOrp8xlQ2et-bdeUuR6mwpiCEF6B9HhGRoCm4sQAvD_BwE This is where I got mine but it is sold out at the moment and I did not see it listed on the web site now.
![[LIVE] : ONE ลุมพินี 68 | คู่เอก "พระจันทร์ฉาย vs โจนาธาน"](http://i.ytimg.com/vi/F3IM3w-XchI/mqdefault.jpg)
THANKS IJUST BOUGHT ONE
Have you changed your hydraulic oil yet and if so what type of oil?
I did and changed it to iso 46. The only reason I used that was someone else changed theirs to that. That is the only info I could find on what weight.
Looks pretty nice! I like that it has the hydraulic thumb and side swing. Maybe you could bolt a 2" receiver hitch from harbor freight under the rear end. If there is clearance when you spin the chassis. Then weld up a bracket to slide in the hitch that will accept small suitcase weights. By the way what's the distance between the joy sticksat seat level?
That’s a good idea. I actually have a 2 inch bolt on receiver. I may try that. The pilot controls are just above the arm rests. It’s very comfortable to sit there and operate it with your arms on the arm rests. I’ll let you know on the measurement.
@@OhioOutdoors-te8jz thank you in advance
I'd be curious to know more about that cooling remedy as I didn't notice any fans. Pilot controls look comfortable, too bad the single pump set up keeps from really taking advantage of them though.
I am not sure what they did to it either. There are no fans. Pilot controls are great. The swinging boom is there if you need it but I do not use it very often as it’s easier to just swing the entire cab.
I have not had any issues with overheating. But it’s just now starting to get in the 80’s here in Ohio.
My brother just pointed out to me that its MAX flow from the aux pump is listed as 1.51 gpm (max pressure is 2,320 psi)... that seems EXTREMELY low.
The Bobcat E10 is rated to 5.3 gpm (max 2,756 psi) and U10 is about 5.5 gpm. 🤷
I'm curious what the swing spin is (RPM) and left/right boom swing as AGT lists neither.
what company did you buy it from?
agtequipment.com. However they were showing them as sold out, and now I cannot find them on their website.
Agtequipment.com now has these back in stock and on their website.
Have a link? I can’t find dm12x-c. Only found dm12-c
This is the DM 12 x-c. I forgot to put the x in the title of the description. Sorry I will correct that. Mine is the 12x-c.
www.agtequipment.com/?gad_source=1&gclid=CjwKCAjwi_exBhA8EiwA_kU1MndB2aEPpi_Fd_wKN2_TOaOrp8xlQ2et-bdeUuR6mwpiCEF6B9HhGRoCm4sQAvD_BwE
This is where I got mine but it is sold out at the moment and I did not see it listed on the web site now.
@@OhioOutdoors-te8jz I don't see that particular model on the website.
agtequipment.com now has these back on their website.
@markshaw2207 just search "agt-dm12x-c-mini-excavator"
It's likely the 2nd or 3rd link on agtequipment website.