Could you make a series of video clips for us and explain to us all the parts of the board for PlayStation devices and be a comprehensive educational course?
Brother no response for ps3 and chromebox? Your number always going off no contact bro, I always comment but its been 2 months our console and chromeboc no update bro, kindly do help
Sir can you explain I'm having an issue with my ps4 that constantly blinking blue light for hours never get to boot up controller also connects and i can put a DVD and eject button also works but not booting (to white light) what problem could be? A hard drive /APU/PSU? Would badly wait for your reply
Hi idrees, i have a similar case, ylod, no screen, everything is ok on the borad, i think the hdmi encoder is the problem, how can i check it? To be sure and replace it, because i havent a donor board, had to buy a new ic
@metavize8046 Hi! To check if the HDMI encoder is the issue, use a multimeter to test the voltage inputs and outputs on the HDMI IC pins. Ensure the power supply lines to the chip are stable and within spec. Also, check for continuity on the HDMI data lines between the encoder and the HDMI port. If these tests don’t indicate a fault, and the rest of the board is fine, it’s likely the encoder is causing the problem. If you’re replacing it, make sure to properly clean and align the solder pads for a secure fit. Let me know how it goes!
Hello, First of all, my English is really terrible and I am using translation. I apologize for my spelling mistakes. When I Try to Turn On My Xbox One, It Suddenly Shuts Down, The Startup Sound Is Interrupted, The Screen Doesn't Come On And The Fan Doesn't Turn. I Checked the Mosfets on the Power Line, There Is No Problem. I Changed the Power Supply, My Question Still Continues. Since I do not know the values of the coils and resistors, I could not check them. The opening sound may sometimes be interrupted after pressing the button. I saw you repairing it in your previous videos, I am writing to you from Turkey. Can You Help Me With This Problem? It Depends on Which Areas I Should Control and How.
Hey me again i just check this video i didnt finish the ps3 last time i ask you for solution hehe but i have a ps4 1200 that have sympton like this its white light on but no picture even after i change the hdmi ic the voltage is good but still no picture so i take a look at the uart to read the error and it stop at the hdmi error or something like that but the weird thing is everything good while it white light you can turn off and even connect controller throught usb cable but when the white light like for 40s or more it shut off imediately no beep sound or anything i think it overheat because i dont put the fan it but if it overheat it should have the beeps dont know what is that failure have you ever seen that before or have any advice to diagnose it i don have the oscilopscope so its abit hard for me Thank you firt mr technology
The white light but no display could be caused by multiple factors, especially since you've already replaced the HDMI IC. Based on your description and the UART error, the issue might be related to the HDMI circuitry beyond just the IC. Inspect the HDMI filters (ESD diodes) and make sure they are working properly. Even if the IC is replaced, a faulty filter can still cause display issues. If the system is turning off after about 40 seconds without beeps, this could be related to the APU chip overheating or experiencing power issues, especially since you didn't attach the fan. Even without beeps, if the PS4 console detects overheating, it could trigger a shutdown after the machine overheats-a message on the TV displays before triggering it off to protect the hardware. So first try to fix the display issue, please just watch the other (WLOD) videos on my channel.
Hello can you repair my backwards compatible ps3? I can send you syscon codes for the errors My ps3 overheats after 20 minutes of playing. Cecha01 model
Master this so much better with the english dubbing
Thanks for the upload. Very informative. Curious as to what tester is that. Looks like an oscilloscope
It is
@@idreestech how do you set it up to give you that waveform?
Plz help ps3 fat av output not working
Google, Oscilloscope component tester diagram.
Thank you for sharing such type of usefull video
It's my pleasure
Could you make a series of video clips for us and explain to us all the parts of the board for PlayStation devices and be a comprehensive educational course?
Very nice🎉
Thanks 🤗
Thank You for the videos
Glad you like them!
Very good work
Thanks
Very good job 👏 👍 👌
Thank you! Cheers!
hey master, that was a piece of cake, the bad thing is when you get a communication failure between the syscon and the processor hahaha
th-cam.com/video/sW4D8BsvpKU/w-d-xo.html
i love you plz continue for more videos
Brother no response for ps3 and chromebox? Your number always going off no contact bro, I always comment but its been 2 months our console and chromeboc no update bro, kindly do help
You have already checked it and i think its GPU having some issues.. can you replace the GPU... ? If you have any older board for spares...!
Sir my ps3 fat av output not working plz help🙏
Please check the AV cable by replacing it with other new cable. Or reset it's video settings to default settings. .
@@idreestech ok i try sir
Sir plz make video on deliding cell prosser IHS without damaging cell prosser
Sir can you explain I'm having an issue with my ps4 that constantly blinking blue light for hours never get to boot up controller also connects and i can put a DVD and eject button also works but not booting (to white light) what problem could be? A hard drive /APU/PSU? Would badly wait for your reply
Please check my other videos regarding the error.
Good work brother 👍👏. Can you please fix my PS3 no display problem...?
Hi idrees, i have a similar case, ylod, no screen, everything is ok on the borad, i think the hdmi encoder is the problem, how can i check it? To be sure and replace it, because i havent a donor board, had to buy a new ic
@metavize8046 Hi! To check if the HDMI encoder is the issue, use a multimeter to test the voltage inputs and outputs on the HDMI IC pins. Ensure the power supply lines to the chip are stable and within spec. Also, check for continuity on the HDMI data lines between the encoder and the HDMI port. If these tests don’t indicate a fault, and the rest of the board is fine, it’s likely the encoder is causing the problem. If you’re replacing it, make sure to properly clean and align the solder pads for a secure fit. Let me know how it goes!
@idreestech Hi master, can i use a ps3 slim hdmi encoder for ps4 fat? Ic number is diffrent at end, ps3 is 0 for ps4 is 1
Nice job I see sir
Thank you kindly
Hello, First of all, my English is really terrible and I am using translation. I apologize for my spelling mistakes. When I Try to Turn On My Xbox One, It Suddenly Shuts Down, The Startup Sound Is Interrupted, The Screen Doesn't Come On And The Fan Doesn't Turn. I Checked the Mosfets on the Power Line, There Is No Problem. I Changed the Power Supply, My Question Still Continues. Since I do not know the values of the coils and resistors, I could not check them. The opening sound may sometimes be interrupted after pressing the button. I saw you repairing it in your previous videos, I am writing to you from Turkey. Can You Help Me With This Problem? It Depends on Which Areas I Should Control and How.
Please join me on Facebook.
Thanx master ❤️🇹🇷
Very good video! Why dont you speak yourself anymore?
I would like to conduct an experiment.
Hey me again i just check this video i didnt finish the ps3 last time i ask you for solution hehe but i have a ps4 1200 that have sympton like this its white light on but no picture even after i change the hdmi ic the voltage is good but still no picture so i take a look at the uart to read the error and it stop at the hdmi error or something like that but the weird thing is everything good while it white light you can turn off and even connect controller throught usb cable but when the white light like for 40s or more it shut off imediately no beep sound or anything i think it overheat because i dont put the fan it but if it overheat it should have the beeps dont know what is that failure have you ever seen that before or have any advice to diagnose it i don have the oscilopscope so its abit hard for me
Thank you firt mr technology
The white light but no display could be caused by multiple factors, especially since you've already replaced the HDMI IC. Based on your description and the UART error, the issue might be related to the HDMI circuitry beyond just the IC.
Inspect the HDMI filters (ESD diodes) and make sure they are working properly. Even if the IC is replaced, a faulty filter can still cause display issues.
If the system is turning off after about 40 seconds without beeps, this could be related to the APU chip overheating or experiencing power issues, especially since you didn't attach the fan. Even without beeps, if the PS4 console detects overheating, it could trigger a shutdown after the machine overheats-a message on the TV displays before triggering it off to protect the hardware. So first try to fix the display issue, please just watch the other (WLOD) videos on my channel.
تحيه طيبه ممكن مساعده
كيف اتواصل معك
Facebook
Nice work, please follow these useful videos for us
Sure 👍
Hello can you repair my backwards compatible ps3? I can send you syscon codes for the errors My ps3 overheats after 20 minutes of playing. Cecha01 model
"Of course, I am happy to help. Please let me know how I can assist you."
Do u provide ps4 downgrade service?
Yes.
@@idreestech ok good, where in Lahore and your contact number pls