@@realtaiter3991 it's a whole new thing when they are not installed in a machine so this makes it look EASIER than what it is , but then again I have found that practice really does make perfect
Excellent, short and to the point. I did the set up right after watching and opened the lock on my first try, 1/8 rotation at a time aka in two stages. Saved my dad a hefty locksmith charge! Thx again and have a great Christmas!
Hi. You make this look easy. I got the exact same kit off Amazon. Some joy so far but its slow. Found an old bike lock out walking in West London tonight. 7 pin tubular. Got it open after about 20 minutes of fiddling, closed it, got it open again, can;t close it now so I am going to bed lol. Bought a tubular pin lock off amazon but it was 4 pins only and that one is a bugger. I've been doing all of this mind without the tension bars and will fit one tomorrow as per your instructions and get back to you . Cheers.
Thanks. I just ordered one of these and would have been most upset if I couldn't find the tension bars and thought they had been left out. They sell two versions of this at Bangood, the cheapest one does not have the tension tools. That is the only difference between the cheapest one and the slightly more expensive one.
Thank you, thank you, thank you! I accidentally closed a safe before putting batteries in it (after I put my jewelry in). I thought all was lost but your video helped me open it!
I purchased the very same tubular lock pick set off Ebay, it came with the pins installed, I didn't know what the allen wrenches were for, but now I do. The video was shot and to the point, easily understood too, thanks.
Is it even possible to pick an Ace II since the pins require different amounts of tension? Another issue with this particular safe of mine... is that I had to apply some force even when I still had the key, pushing in on the door and almost lifting upward.. so frustrating. Yes, I've attempted single pin picking and am simply having the same problem, and I cannot find the right tension wrench to use... please help.
Hi I just recently bought one and I have done everything you have shown on video getting the device ready to use but I have not been able to open/pick any locks at all. What am I doing wrong?
You're the 10th YT channel I've seen using the lock pick tool. I ordered them I can't get it to work. It won't open the safe, won't open a cheap cabinet I have for storing paint and kick knacks, it won't open the tool box or any other lock I have that is tubular. Every channel literally shows just sticking it in and a little wiggle and done. Tried with 7 tensioning bands down to 0 tensioning bands. Either I am missing something or I have a defective set. Any hints or tricks on the use of the lockpick set?
How do you open a tubular lock, the ones that pop out. All I can find is the standard tubular locks and not the kind that pop out when you unlock them.
Nice video! I have a question though about these pics. I just picked a set of these up, and I have YET to have them open any locks I have, including a clear cheap training lock. On the clear one I can see it over drives a pin or two, and sometimes under drives one. I can manually jack with it, but it's getting quite annoying. I have tried lubing the blade areas with 3 in 1, and have gone as far as lightly sand the channels as well. But no matter what, it does in no way function anything near like you show. Do you have any tips you can pass on? Thanks
I am having the same problem. I have had mine about a week now and tried it on 4 different locks and was unable to get it to work. There are many TH-cam videos of people using them straight out of the box and just working beautifully (like this video). I am lead to believe that either the tool is defective or I am defective. Both are likely. If anyone has advice, I am interested to hear it!
Hi - I have a lock on an Alcohol Vending machine - That takes $2 coins - Its at a friends pub however I've lost the key - The Outer diameter is 6.8 an inner diameter is 4.7 mm ?? What tool do I need to open this ???
Thanks,just got mine,but it doesn't come with instructions.So it was helpful to see you set up your tools.Did you have to sand down, or file ( modify)your tools? Also do you know if they will open a Kryptonite Lock? Thanks
Cool bro,thank you. I think the Kryptonite Lock depending on what brand has security pins which makes it very hard, to in possible. You should check out the crowd haven't done it great videos. BOSNIANBILL IS 1 awesome lock picker
just bought some of these and the grub screws on all 3 of them are missing.. do you know what size these are as i think trying to get gearbest to send them will be imposible
I only filed the tip. to square it up a little as it was a little tight in the lock. I did it while they were fitted. only took a few strokes to nip the edges off.
Subscobed a few weeks ago, liking your vids so far, will you be expanding the vids to various lock types? I watch quite a few lock pick vids now and really enjoy bosnian bills style 😄
@@AllWeatherTruckin yeah I have been gentle, and have been rough. I tried adjusting the tension bands from 3 and on up. Literally nothing is working. My tubular lock is from Chateau, and the one I’m using is from Guard Security. Do you think my lock pick just has a defect?
Have you tried adjusting the bands? To make it work you need just enough resistance to get the pins to slip at binding point. I still have the set in this video and still open the occasional lock ok with it
hello I am a beginner picker and I wanted to see if u would happen to have any old locks or picks that u don't use anymore that I might be able to get so I can pratice thank u for ur time
you can make your own lockpicks. i made all of my picks myself and its pretty easy. BosnianBill have great "make your own picks" videos on his channel.
I will have to see if our IT guys have opened it yet and if not and still needed to be opened I may invest in some. Only problem would be long delivery.
+waddac2 you could try single pin picking. sadly the UK warehouse has sold out so yeah your looking at 10-20 days delivery. I work in IT and have a few of those laptop charging trollies so can see if they fit if you like?
+LockPickIt I was going to single pin pick it on the day of looking but had no tension bar to fit right and was slipping or binding. Yes if you do not mind trying yours on a charging cabinet, that would be great ;o))))
I just got a set of these picks..... No Pins...... anywhere. Also, there are no HOLES in which to PUT pins. I can't even make my own pins and insert them. No place to PUT them.
no, some locks have varying pin tension and spring heights and that doesn't allow this pick took to manipulate the lock, though you could manually adjust the rods until you feel a click though that is sometimes harder then single pin picking. Overall these are quite good locks since not many criminals have these picks or even understand the concept and you should be quite safe.
I can't help but notice that he didn't really pick the lock! The pick was preset for that lock... ...he might as well have used a key for this demonstration.
Is it just my set or does anyone else have difficulty unscrewing the screw in order to insert the tension pin? I think mine is stripped- I cannot get the tension pin to sit even/below the edge of the tubular pick..??? :-(
sometimes these can be difficult if the cam on a lock as pressure on it. you can try pushing in to release the pressure or try single pin picking it to between to chambers and use this tool to impression it from there and open the lock the rest of the way and then dont reset the tool just take to a locksmith and they can decode it and cut a key
Nice demo. They are great picks considering that they are about the cheapest ones out there. I like them better than my more expensive ones.
LockPickingLawyer
they do only the version without tension rods and without holes for them...
I have about 20 of these lock and this so called lock pick wont open any
Mine doesn’t work that easy don’t know what I doing wrong
@@realtaiter3991 it's a whole new thing when they are not installed in a machine so this makes it look EASIER than what it is , but then again I have found that practice really does make perfect
@@wilpic1 user error obviously
Thanks for sharing this. Nice to see someone just get straight to it and do a proper, easy to understand demonstration! Thumbs Up!!
I've broken into 5 workshops and removed all the locked tools with the help of this video 😃
Can you post a video on how you broke into the workshops?
Excellent, short and to the point.
I did the set up right after watching and opened the lock on my first try, 1/8 rotation at a time aka in two stages.
Saved my dad a hefty locksmith charge!
Thx again and have a great Christmas!
Hi. You make this look easy. I got the exact same kit off Amazon. Some joy so far but its slow. Found an old bike lock out walking in West London tonight. 7 pin tubular. Got it open after about 20 minutes of fiddling, closed it, got it open again, can;t close it now so I am going to bed lol.
Bought a tubular pin lock off amazon but it was 4 pins only and that one is a bugger.
I've been doing all of this mind without the tension bars and will fit one tomorrow as per your instructions and get back to you .
Cheers.
Thanks for taking the time to do this video.
I have just ordered a set, so now I know what to do when I get them.
Thanks again.
Thanks. I just ordered one of these and would have been most upset if I couldn't find the tension bars and thought they had been left out. They sell two versions of this at Bangood, the cheapest one does not have the tension tools. That is the only difference between the cheapest one and the slightly more expensive one.
straight to the point, your bleeping awesome man ! thank you
Thank you, thank you, thank you! I accidentally closed a safe before putting batteries in it (after I put my jewelry in). I thought all was lost but your video helped me open it!
I purchased the very same tubular lock pick set off Ebay, it came with the pins installed, I didn't know what the allen wrenches were for, but now I do. The video was shot and to the point, easily understood too, thanks.
Do you know how many grey hairs I've earned stressing over this? Thank you. This was a great learning experience for me.
Thank you for this. I was wondering why I couldn't install the pin, it just wouldn't slide into the hole.
Thanks So much!!!! This was wicked easy to learn!!! thanks for your help
You're very welcome!
Is it even possible to pick an Ace II since the pins require different amounts of tension? Another issue with this particular safe of mine... is that I had to apply some force even when I still had the key, pushing in on the door and almost lifting upward.. so frustrating. Yes, I've attempted single pin picking and am simply having the same problem, and I cannot find the right tension wrench to use... please help.
Hi I just recently bought one and I have done everything you have shown on video getting the device ready to use but I have not been able to open/pick any locks at all. What am I doing wrong?
can we close the lock also ? or just open it and it doesn't close ?
Bro your a god amongst mortals
You're the 10th YT channel I've seen using the lock pick tool. I ordered them I can't get it to work. It won't open the safe, won't open a cheap cabinet I have for storing paint and kick knacks, it won't open the tool box or any other lock I have that is tubular. Every channel literally shows just sticking it in and a little wiggle and done. Tried with 7 tensioning bands down to 0 tensioning bands. Either I am missing something or I have a defective set. Any hints or tricks on the use of the lockpick set?
It depends on the lock internals. I have only had one lock I couldn't open with it so far. And trust me I've spent hours trying.
The lock I have doesn’t have the notch on the center pin, only the outside ring.
It still works purchased this same kit for 10$ at first it didn’t work wiggled it around for literally 10secpopped open
It's a crazy kit for the money
How do you open a tubular lock, the ones that pop out. All I can find is the standard tubular locks and not the kind that pop out when you unlock them.
Nice video!
I have a question though about these pics. I just picked a set of these up, and I have YET to have them open any locks I have, including a clear cheap training lock.
On the clear one I can see it over drives a pin or two, and sometimes under drives one. I can manually jack with it, but it's getting quite annoying.
I have tried lubing the blade areas with 3 in 1, and have gone as far as lightly sand the channels as well. But no matter what, it does in no way function anything near like you show.
Do you have any tips you can pass on?
Thanks
I am having the same problem. I have had mine about a week now and tried it on 4 different locks and was unable to get it to work. There are many TH-cam videos of people using them straight out of the box and just working beautifully (like this video). I am lead to believe that either the tool is defective or I am defective. Both are likely.
If anyone has advice, I am interested to hear it!
How do I remove the tension pins? I’ve received with them inside but they aren’t budging even though I take out the entire bolt holding it in place.
Hi - I have a lock on an Alcohol Vending machine - That takes $2 coins - Its at a friends pub however I've lost the key - The Outer diameter is 6.8 an inner diameter is 4.7 mm ?? What tool do I need to open this ???
if this kit won't fit the lock your be best of single pin picking. if you search spp tubular lock there are some great examples how to do it.
mine didn’t come with the little metal tubes?! how do i get them!!
Wet good I am going to order a set to help me open my grandfathers safe he lost the key for
Thanks,just got mine,but it doesn't come with instructions.So it was helpful to see you set up your tools.Did you have to sand down, or file ( modify)your tools? Also do you know if they will open a Kryptonite Lock? Thanks
+Larry G 《 Thumper 》 yes I filed the pin to allow it to it to fit better in some locks. And sorry I haven't tried one of those yet with mine
Cool bro,thank you. I think the Kryptonite Lock depending on what brand has security pins which makes it very hard, to in possible. You should check out the crowd haven't done it great videos. BOSNIANBILL IS 1 awesome lock picker
Map Gas work on Kryptonite U locks, about 45 secs
Great review and demo. How much did they cost?
About £25 on Amazon or about $20-$30 USD if you are in the States.
I got the same kit and it did not come with these pins or does it have a hole for the pins inside the tool
But Work?
My huk lock pick set doesnt have any bars or even a hole for them to locate on the pick itself not happy :(
I've watched the video 10 times...followed to the tee. Mine won't unlock nothing. What is wrong?? Help
just bought some of these and the grub screws on all 3 of them are missing.. do you know what size these are as i think trying to get gearbest to send them will be imposible
oh no, where did you have to file? should I file them before or after I install them?
I only filed the tip. to square it up a little as it was a little tight in the lock. I did it while they were fitted. only took a few strokes to nip the edges off.
+LockPickIt thanks mate
Subscobed a few weeks ago, liking your vids so far, will you be expanding the vids to various lock types? I watch quite a few lock pick vids now and really enjoy bosnian bills style 😄
yeah thats the plan. I have a few locks to pick on cam. also some more tools to review. thanks for watching :)
It will not work for me. I tried taking out the tension bar. I had to replace rods and all. Do you think I just got a bad one?
Are you being gentle with it?
@@AllWeatherTruckin yeah I have been gentle, and have been rough. I tried adjusting the tension bands from 3 and on up. Literally nothing is working. My tubular lock is from Chateau, and the one I’m using is from Guard Security. Do you think my lock pick just has a defect?
Have you tried adjusting the bands? To make it work you need just enough resistance to get the pins to slip at binding point. I still have the set in this video and still open the occasional lock ok with it
@@AllWeatherTruckin yeah I have. How many bands do you usually keep on for it to work?
I got a set buti can't get the tension bar to go in one of them how do I fix it
Is the hole clear?
hello I am a beginner picker and I wanted to see if u would happen to have any old locks or picks that u don't use anymore that I might be able to get so I can pratice thank u for ur time
tony archuleta Amazon sells lock pick starter kits for 20 bucks if your interested in the hobby its not a bad value
you can make your own lockpicks. i made all of my picks myself and its pretty easy. BosnianBill have great "make your own picks" videos on his channel.
I got hosed. Mine don't have the pin, nor do they even have a spot for the pin.
How do you transfer the 7 pins from the tool (that opened the lock) to a depth code on a tubular key cutter for a blank key?
Use a tubular measurement key to decode
Thnks Dustin, Is there enough clearance over the pick for the measurement tool say for a deep cut wire/pin ? Does it lay flat for an accurate reading?
My south ord 7pin klom opened everything effortlessly these wont open anything..
for some reason mine wont work the pins on the pick raise the same amount every time can u help
These dont fit my lock, are they different sizez?
This set has 3 different sizes. Most common in the UK. But I have seen other sizes around
The tension bar You filed?
It worked on first try, then wouldn't work again on some lock. ???
They can be fiddly. The Little bands provide the tension so making an adjustment on those can help
Great video buddy. Would one of those fit one of the tubular locks on a lap top charging cabinet as my southord 7 pin pick is too thick to fit?
yeah I believe it should.
I will have to see if our IT guys have opened it yet and if not and still needed to be opened I may invest in some. Only problem would be long delivery.
+waddac2 you could try single pin picking. sadly the UK warehouse has sold out so yeah your looking at 10-20 days delivery. I work in IT and have a few of those laptop charging trollies so can see if they fit if you like?
+LockPickIt I was going to single pin pick it on the day of looking but had no tension bar to fit right and was slipping or binding. Yes if you do not mind trying yours on a charging cabinet, that would be great ;o))))
I just got a set of these picks..... No Pins...... anywhere. Also, there are no HOLES in which to PUT pins. I can't even make my own pins and insert them. No place to PUT them.
Mine didn't come with pins , is it useless !?
does this tool work on any tubular lock
no, some locks have varying pin tension and spring heights and that doesn't allow this pick took to manipulate the lock, though you could manually adjust the rods until you feel a click though that is sometimes harder then single pin picking. Overall these are quite good locks since not many criminals have these picks or even understand the concept and you should be quite safe.
Nobody explains what the rubber bands are for.
tension.
hi so I need a 6.8mm tool?
now i feel dumb i tried to remove my pin with pliers did not know their was a screw
why don't they just ship with the bars already installed?
If anyone can help I just can’t open even the practice plastic lock it’s so hard for me can anyone help ?
tension bar won't go all the way in! what to do?
make sure the screw is out far enough, push it down with something.
Wow wtf my set came with no tension bars and has no holes in the end like yours for one. No wonder it's useless
Same here!
I bent 2 tension pins trying to do this :((
If you have bent the tension pins your trying to force them. try gentle rocking/twisting to make the pins bind and pick them.
Very cool. Thanks for sharing that.
Thanks for watching :)
+LockPickIt does this work on vending machines
Wtf mine don't have pins, or holes or set screws?!
the new ones dont come with the pins
I can't help but notice that he didn't really pick the lock! The pick was preset for that lock...
...he might as well have used a key for this demonstration.
You can clearly see I pushed all the pins down, levelled off the pins... you can also see that the pins move when inserted into the lock...
Is it just my set or does anyone else have difficulty unscrewing the screw in order to insert the tension pin? I think mine is stripped- I cannot get the tension pin to sit even/below the edge of the tubular pick..??? :-(
Me too, same problem....
@DaJOKER60 How did you get it to work or did you return them?
Amy Sumis push it hard in some are thick
I can't get the tension rod out can anyone help me?
there is a set screw hiding under one of the sliding pins
Thanks so much
ما اسم المنتج وهل يوجد فى مصر واين
Will the 7 tubular pick open up a coke michine
Don't get too heavy handed. Had several key pins break in different locks.
You are a fucktwat who shouldn't be using tools.
My freaking order didn’t even come with a tension bar🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬
well you shure made that look easy...mine wont work
sometimes these can be difficult if the cam on a lock as pressure on it.
you can try pushing in to release the pressure or try single pin
picking it to between to chambers and use this tool to impression it
from there and open the lock the rest of the way and then dont reset the
tool just take to a locksmith and they can decode it and cut a key
Send me some hucks. I wanna try it on security lockers
Precisava de uma dessa
Miss leading, I thought this was a universal kid. It's all too small for most soda machines.
how must
TH-camrs providing information thinking what they believe is obvious is mostly a waist of time!
Huck give away
I find my southord tubular lock picks work better
Mine was missing one of the tension bars where do I get replacement