ACCENT WALL WITH CIRCLES!
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2019
- Another new accent wall design that we have never done until now. Let me know what you think!
ONLY PRIMER I USE: amzn.to/30hJsab
FAVORITE SPRAY TIP: amzn.to/2XxVLxx
SPRAY GUN: amzn.to/2L5PIhN
FULL FACE RESPIRATOR: amzn.to/2XxJe1G
SANDING SPONGES: amzn.to/2XwYiNe
GLUE I USE: finishcarpentry.tv
INSTAGRAM: / finishcarpentrytv
GET A SHIRT HERE: finishcarpentry.tv/
EVERY TOOL I USE: www.amazon.com/shop/finishcar...
VIDEO/CAMERA GEAR
MAIN CAMERA: amzn.to/2Kk1Tan
LENS: amzn.to/2MReIej
SMALL CAMERA: amzn.to/2KlLbr3
MIC: amzn.to/2Kkbj5O
DRONE: amzn.to/2IPsby0
www. dfwcrownmoulding.com - แนวปฏิบัติและการใช้ชีวิต
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 6](http://i.ytimg.com/vi/CVUx09Rx0-M/mqdefault.jpg)
Can you do a video sometime on your process for taping and masking off a room for when you paint?
I found that they make a circle cutting jig that attaches to your jig saw for easy circle cutting. Basically the jig saw blade would be where the pencil is on my little tracing jig that you see in this video. Would have been much easier than tracing the line free handed like I did. But I will be getting that jig if I ever need to cut circles again!
Finish Carpentry TV why was yesterday's video removed. I was enjoying what i was watching then it just got cut off
Wasn’t there a video before this that was getting ready for an accent wall? Can’t find it
I had to make circular trim for some porthole windows; I just made a circle cutting jig from 1/4" plywood and took the base off of my DeWalt trim router and attached the plywood to the router then just made a couple of passes and Voila' , done perfectly.
A router jig works wonders on cutting circles. But very nicely done with a jigsaw 🤙🤙
They also make a circle cutting jig for a router base.
Another great job.. watching this sitting in my bin lorry in Edinburgh and being amazed again at how precise you guys are and how much effort goes into the finishes. Beautiful. Great job..
I would love to give this a try! Love learning these accent walls and all the different takes on them,
keep up the fantastic work Richard
Gorgeous. Love the minimalist look. Very mid century modern feel.
Looks really good. I love your perfectionism and that you are so passionate about what you do. Thank you for sharing this with us.
Thank you for the "after" shot! Really love seeing a finished product!
Wasn't as bad as I thought it would be.
I love watching you grow. I have been watching since the beginning. The stuff you do now is amazing work!
Thanks for showing the finished product, it's nice to see the completed job. Keep up the good work...!!
Of course it's as perfect as it can be you did it! :) Looks amazing :) can't wait for more
Wall looks Great!
Looks superb!
Your skills are always great to see. Thanks for all the fantastic deas!
The Looovvvee Booooat, promises something for everyone...
Looks awesome!!
Pretty straight forward work. I think it looks great.
That looks amazing! What a fantastic idea!
I like it !!!!!! Accent walls are cool.
That looks great!
I actually really liked that design, also I liked the funky camera which showed the entire wall. gg
Looks awesome
Love it!
Wall looks awesome! Great job!
I really appreciate you showing the finsh product with tape and plastic removed. 👍 great job
Looks Great, and wonderful job as always.
Brilliant work!
Oh yeah and by the way your work is freaking awesome! I'm going to be copying the Jiggy made for cutting Crown nested. And also going to be sanding the base of my miter saw.
Interesting concept, looks kind of like going back to the late 50's or so but hey, got to do what the customer wants. great job on alignment and placement and as always very professional work.
That looks awesome Richard!
I think the best part of this video was your ability to cut perfectly smooth circles with a jigsaw. I couldn't do it.
Great video and design!
Awesom job!!!
I love it
Love your videos! Here’s a tip taught to me for reducing/eliminating fresh paint smell in house... use cooking grade vanilla extract to lessen the smell of paint fumes. add one tablespoon per quart.
Beautifully simple. You to fantastic work. I still wish you came as far as San Antonio
Equidistant 👌👌👌 learned a new word!
Looks great, everything centers up nice on video. Great work
Great work again, I always learn off you, thanks..
Holy smokes!!!!! Real nice bruh. Killin it with kind skills
love it!!
Good video again! Killed it
My boy at work put me onto your channel i am hooked i love the work you guys put out and your tips and tricks help. I am fully addicted to finish carpentry now. We do alot of floors and all i do is anxiously wait for the trim aspect of the job. Thank you for making so many videos you really make an impact man FLAWLESSSS WORKKKKKKKKKKKKKKKKK💪🏼😎
Looks very elegant bro ....nice work
Great job
Looks nice - circle accents are different and cool.
At first I was thinking the "Olympic Circles"......but the finished product turned out really, really nice
Very well done!!!!
Very creative.
Nice work gentlemen! 😎👍
Pretty dope
great job
Excellent 👌
A rug will really tie the room together.
Awesome with the exception of people’s comments on how they would do it
Far out looking good
I like dimensions. Very good job.
Very enjoyable following your accent wall touch. Interesting concept. Would like to see the finished floor with the accents if possible. -Bob...
Laser level. Saves time
You make great content and doing awesome work. I also love that you are always trying to learn. You are always asking how things look and how you can improve. That being said I am not going to talk about the circles being cut. Everyone has already talked about using the router. My thing is that you are leveling the circles. Level is great if you have a perfect set up. If the ceiling is not level you are asking for trouble. Your eye will pick up the difference from level and not level. Same thing with pluming your trim. If your walls are out then your plum board will look out of plumb. Also get an exhaust fan when spraying inside.
Most of the accent walls you feature in your videos aren't to my taste but this one I actually like. I may try that design somewhere myself.
You should try using a router jig very similar to the jig you made to mark it.
Great design. Not many take their craft as serious as you. If you ever find yourself in the Pinehurst NC area, I would hire you and cook your meals. Thanks for the videos
I think it looks good keep up the good work it reminds me of a cabin on a cruise ship that'd be pretty cool if they had an aquarium on the other side of the wall in the circles inside where the glass of the tank👍👍👍👍
Tampa Bay Dan that’s what my wife said!
You can also cut perfect circles on a table saw. Wish I could post a picture to show my setup.
I just saw your video about baseboard ideas and loved them and loved your attention to detail with those pocket holes. Then I wanted to see what other great ideas you have that I can steal and started this vid because I want those circle walls. Then u screwed in to make circle measurements perfect and I really fell in love with you! That attention to detail and someone who is as big as a perfectionist as I am is hard to find. And so many little things drive me crazy in my house that I’m sure you would have done perfectly. That being said, where are you located? Could you come do a bathroom and kitchen remodel in Denver for me??
Thanks for the great video. You attention to detail and perfection is amazing. Your first video that you uploaded yesterday was also very helpful but I cannot find it anymore. I hope it's not taken down or anything. Would be very helpful if you can post a link of that video.
That’s a crazy hard cut to make
Reminds me of the 70's
Cut the big circle with router first, then inside circle with router second?
That’s probably what I would do simply because I’m not as skilled as he is with the jigsaw, but a router sure would create a lot of nasty dust on that MDF.
@@athhud put your jig saw on low speed, clean cut setting and it's pretty easy to control
Yeah, but a router would make it absolutely PERFECT. Jigsaw?? Really?? 😆
..........If you have ninja skills with the jigsaw.....
Richard: you succeeded in re-created ART DECO accent wall. Great job.
I see many folks are trying to help you grow in skills. That great to have a community as such. Using a circular router jig is the way to go, yes you can make it.
Also, using 20 min Hot Mud (compound) works great as a wood to drywall adhesive. Clean up with damp sponge which leaves a small inside quarter round edge. Ready for primer n paint.
Best regards. 🙂
Thanks so much for all of your knowledge! - Great ideas and skills!! Do you sand or seal the cut edges of the MDF. If you don't - I was under the impression the cut edges would not be nearly as smooth as the flat edges.
I know this is an old video, but damn that looks awesome. Idk how I missed this one. Lol
I hope they center the bed with the wall when it goes back together after flooring. I looked at it for a minute and my OCD was going insane 😂
haha yep, that's the problem with permanent features on walls. You are forever stuck with furniture placement.
Good😃
Always enjoy you videos and explanations. Is the wall supposed to mimic a giant headboard? With the moldings framing the circles it seems that way?
I recently retired after 30 odd years.
I was mostly a remodeler. I excelled at matching old to new and repairing seemingly unrepairable structures.
I always felt a had a good eye and hand towards good finish work also. However next to you I feel I failed by comparison. While my work ( going by what other Carpenters and , most importantly, my customers said ) was good you just have that extra something.
What I like to call The Norm Abrams Quality. Besides have master finish skills you have an eye for design which is something unfortunately I did not
Enjoy your channel
Keep up the good work
Wow he mentioned Norm Abrams while referring to you--that’s a major compliment man.
Looks fantastic, did you thin out the solo?
its always a sad week when you go through a whole week with no new videos from you lol
Really awesome skills, came out great! How much time do you think you have invested to complete this wall?
After you spray primer do you sand it? And if so how smooth does it need to be? Thanks again for all the help
That Texas heat. Gotta put up a tent.
Awesome job👌🏽 but, Question, though why don’t you like using pro-block primer by sherwin-Williams?
Interesting treatment. Did you have to radius the verticals where they hit the circles? Or was the gap small enough to fill since you were painting?
Thought for sure youd use a router mill bit mounted to that jig
Since you didn’t put the hardboard on the drywall before the trim, what did you do to prep for the texture of the pain? I’m hoping to do the same, thanks to your videos!
this one's definitely more my bag than the last one but i'm still not huge on accent walls in general. definitely would've centered those circles vertically in the space between the bed's headboard and the crown but hey, if that's what the customer wants, that's what they want right?
What paint products used more for new trim and doors
You guys do absolutely awesome work. I'd hire you guys in second.. as far as the design, I would've gone with an odd number, either 3 or 5 circles. This way you'd have a central focal point.. Just my 2 cents.. looks great tho!.
Hey man love the channel, fellow Fort Worth resident here.
What was the name of you favorite line place here in town? We're rehabbing a flooded property on the westside and it's time to pick up some baseboards.
After being married for over 30 yrs the first thing I noticed is that the bed is not centered on the wall. I have learned some good tips for my trim projects. Thanks
Jut saw how many router comment there were lol, should of looked before I leapt...love the videos.
Routers rock!!! They're even better with guide bushings.
You can news router and jig to circles
Have you tried cutting the circles with a router before? you get a smoother finish if you do it in 3 passes w/ 1/4" bit,
I’m going to echo everyone else’s comments about the router with a jig being easier, same jig that you used with a pencil except your trim router would bolt to it...
Peter Parfitt has an excellent circle cutter jig. He also uses a guide bushing which means the router cord doesn't get tangled. I've made one out plain old scraps of 1/2" ply.
If I could cut as well as he can with the jigsaw, I would use the jigsaw just to avoid all of the dust kicked up by a router.
@@athhud as I said my Makita jig saw, as most, has 10 different settings. Put setting to the 1 u can handle and unless u have the shakes u will be surprised how accurate the cut.
There is no way anyone could cut that circle on what I call race car mode. But if I put the jig saw on a slower setting U can write your name in script.
Kroban is 100% on the circle jig.
Do u sand primer coats and paint coats as well?
I wanted to let you know we are missing your videos, hope to see you soon.
I hope he is doing well and will post more soon also.
This might be a stupid question; but, wondering if at the joint of 1x2 & circle’s outer edge, you did a concave “joint” or left it as a “straight” edge? Would it make much of a difference if did concave etc....? What cartridges are you using w/ respirator for the stuff you spray?
Could you put that pop up tent you used in this vid, on your Amazon Marketplace Landing Page for us please......been trying to find a good durable & affordable one for a while now.
Thanks for the vid, as always, it’s interesting, fun, & we learned something new. Wall looks great, & been loving the recent accent walls you’ve been installing lately 👍🏻....also know doing circles like this on a wall.....not easy to get right; can be tricky & cause ppl to go crazy when spend to much time measuring etc....🤪😁
Have a good one✌🏼
Your jigsaw skills are strong. I used a router.
Great work. I have notice accent walls seem to be popular lately. What do you charge for this one of a kind accent wall and are they mostly day jobs? Thank you!
Damn I wanna do this in my house idk where tho
Super view is Beasty Boys dope. Lmao!!!!What mask is that while ur spraying
Nice design. Wonder which car company they favor jk. Great work though, as always.