Peugeot 307 1.6hdi Broken glow plug removal.
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- This is how I removed the broken glow plug tip from my a 1.6hdi Peugeot engine.
Follow at your own risk.
Understand the process involved in removal of the glow plug. Understand how the tip is removed from the cylinder head and the risks involved in doing so.
Hope this is helpful to someone.
I have the same problem on a 2L HDI Peugeot 307SW, but this is the earlier 8 valve. Clearly the design of the heater plug is rubbish. I will try taking an injector out and have a look to see what the access is like. Had no problem on my C5 when I did those, but from memory the plugs were different. Thanks for posting.
Got all 4 broken and managed to get them out (Berlingo,took all the precautions )!
The fun doesn’t stop).A tiny magnet stayed behind in cylinder nr.1 probably aganist a valve, nightmare.
Same car, same engine, same head ache. On cylinder #1 the glow plug was loose, so no big issues! Just a bit of carbon holding it in place.
Cylinder #2 well that's another story. Broken right at the base. Damn it! All come to an halt! :-(
Good tip mate 👍🏻
Without trying to create a problem but you where really unlucky . To brake the tip of a glow plug , or they were really REALLY burned and such bad quality . I removed mine from Beru. And i had to clean the engine on that side, there was to much oil from a old leak. I tried with pliers to brake one tip so i could use the tip less plug as a cover for the hole. I could not brake it or even bend it i had to use a saw.
Usually glow plugs brake on the beginning of the thread.
Like I said i was surprised how hard those are, like everyone i was not very comfortable doing the job but all went well. not they have cooper grease, nest time might not be so stressful
Which glow plug did you buy? The beru?
I used the Bosch ones I believe.
How much do you charge mine vauxhall zafira MK2 z17dtr
It was just a DIY job on my own car, I believe they're £150 to be done professionally, each.
My glow plug has snapped off 😖i feel like death...☠☠☠. It was the cylinder nearest to the cambelt. By the way it is the same engine as you 1.6hdi. You dont live near huddersfield do ya ?
I am not near Huddersfield. Hope you got it sorted. They're a nightmare 😢
just an idea
if the tip of the glow plug is empty, why not use a (TAP BORER) and a long screw or make one and pull the remaining of the glow plug.
sorry for the bad english