Its allreday to late if u havent noticed. Its the same everywwhere with every show, remember all thos show on discovery etc, they allways have good content the first 1-3 seasons with alott of work etc, but after some time its just a bunch of edeting and talking/drama no real work at all.
Won’t say I’ve been since the begin but I subscribed when he was around 60K. I just don’t see Tom selling out like the others. Ofcourse he’ll promote ads or sponsors but he’s too raw to change up on us like that.
Tom go get the Lisle brake flaring tool part number 33260. It will make a perfect flare every time. I completely hated making brake lines with those old junk style flaring tools.
I love your videos so fricken much, man. I watch a lot of car content on TH-cam and yours is a cut above the rest, no doubt. I just got home from a long day of work and watching this is a great way to chill. Thanks, man. Keep up the good work
(7:58) "What I'ma do first, I'ma do a little bit of jacking & then I'ma go right at this rear end & I'ma start drilling until it's tight!" Only Tom can be so cringe & COOL AS HELL at the same time!
@jacksonstephens9772 He could rebuild it tho. Bore it 30 over and put Edelbrock heads on it. He could keep the blower and carb setup that's on it. Or maybe just do a stock displacement rebuild, just put in new rings and seals in it and line home it. Just a refresher type rebuild
@@THATPOWERSTROKELOVERyou need to pull some more motors apart. "Or just put in new ring and line hone it." Align honing is a huge job and a lot higher end machining than over boring to add new pistons with a fresh piston to wall clearance. You wouldn't skimp on re using pistons if you were spending align hone money. Align honing is usually only done when adding an arp stud kit or going to a 4 bolt main to get the caps back in to round with the extra clamping force . With the cost of it you'd usually find another 5 litre block then align hone just to repair cap walk. I've only ever had 2 blocks align honed and it cost me a fortune lol.
@hayden6056 I've never torn a V8 down so I have basically no experience. I've only torn down a Briggs And Stratton. I know I probably sound stupid. Thank you for your input
Bro ngl this dude has inspired me to hot rod the hell outta my 87 trans am. But money is my issue and more importantly there’s like no info on these cars
There is plenty of information on 3rd gen f bodies out there lol they’re cake to work on, tons of forums and options for a nice 3rd gen, I hope to build one when I get my 4th gen all sorted the way I want it if that ever happens 😂
Ah yes the classic if it ain’t broke, break it for content trick. Genuinely the noise complaint videos are my favorite so if this was all Tom did with his channel i’d still be here every week!
This man reminds me of somebody that I’ve seen and know but obviously I have never met him or anything you just give me that feeling of like I knew you in another life lol
Hey Tom, love the car! I love the headlights especially! Do you mind sharing with me where you got them? I have a 66 Falcon I’m currently 302 swapping and I think those headlights would be killer.
That redline at 16:41 was absolute music to my ears.
🙏🔥🙌
Not gonna lie I would have laughed my ass off that clutch dump broke that rear axle.
@@GrumpyIan id much rather him upload sooner than replace another rear and advertise his products to afford it
@@BlownB2K Same, but still it would have been hilarious.
i hope this moment alone is a short soon cause i re-watched that a few times
When I refurb my Tom so hard I get a noise complaint
Oh yeah daddy
I remember when ole cleet used to show all the mech works. You are now his replacement for him. Please keep showing all the work. I like it a lot
I love this comment 😅
Its allreday to late if u havent noticed. Its the same everywwhere with every show, remember all thos show on discovery etc, they allways have good content the first 1-3 seasons with alott of work etc, but after some time its just a bunch of edeting and talking/drama no real work at all.
Won’t say I’ve been since the begin but I subscribed when he was around 60K. I just don’t see Tom selling out like the others. Ofcourse he’ll promote ads or sponsors but he’s too raw to change up on us like that.
Try Pole Barn Garage or Junkyard digs. They get deep into the weeds on stuff.
@@ziggystardink9389 pbg is even better than junkyard imo. He’s awesome lol I hope he can build a new barn one day. He deserves it
Great video Tom! You got me on Facebook marketplace looking for an old 69 mustang that’s my dream car them downshifts sound heavenly btw!
I'm impressed with how accurate Tom is with that hammer.
My Tom's refurbin rn
16:42 that redline😩😩😩
You are the reason I'm working on my dads 67 Monte Carlo, I get all my lessons from your videos!
Tom go get the Lisle brake flaring tool part number 33260. It will make a perfect flare every time. I completely hated making brake lines with those old junk style flaring tools.
some porn bot actually stole your comment and tom liked that one instead
Thanks I just saw it...
That sucks
@@doursenlmao 😂💀
8:00 was wild 😂
Best part 😂
12:19 Tom looking like he just left a diddy party all the pumping and oil on him😭
I love your videos so fricken much, man. I watch a lot of car content on TH-cam and yours is a cut above the rest, no doubt. I just got home from a long day of work and watching this is a great way to chill. Thanks, man. Keep up the good work
YES BRO YIU FINALLY POSTED IVE BEEN WAITING ALL DAY
(7:58) "What I'ma do first, I'ma do a little bit of jacking & then I'ma go right at this rear end & I'ma start drilling until it's tight!" Only Tom can be so cringe & COOL AS HELL at the same time!
Gay
@@Troublemeyer so what, arent we all?
@@PAYDAY505 No. Just the majority now is gay and weird. There's still a contingent of Men who want to be Men.
Any updates on trade up challenge?
Bro asked with payment
Glad you got Noise Complaint running again Tom! Thank you for The Best Damn Automotive Content on TH-cam!
Hey Tom, I’m just curious, but are you gonna do Power Tour next year? That would be awesome. Noise Complaint and 8 Ball! That would be PERFECT!!!!
Idk if 8 ball would make it that motor is cooked
@jacksonstephens9772 He could rebuild it tho. Bore it 30 over and put Edelbrock heads on it. He could keep the blower and carb setup that's on it. Or maybe just do a stock displacement rebuild, just put in new rings and seals in it and line home it. Just a refresher type rebuild
@@THATPOWERSTROKELOVERyou need to pull some more motors apart.
"Or just put in new ring and line hone it."
Align honing is a huge job and a lot higher end machining than over boring to add new pistons with a fresh piston to wall clearance.
You wouldn't skimp on re using pistons if you were spending align hone money.
Align honing is usually only done when adding an arp stud kit or going to a 4 bolt main to get the caps back in to round with the extra clamping force .
With the cost of it you'd usually find another 5 litre block then align hone just to repair cap walk.
I've only ever had 2 blocks align honed and it cost me a fortune lol.
@hayden6056 I've never torn a V8 down so I have basically no experience. I've only torn down a Briggs And Stratton. I know I probably sound stupid. Thank you for your input
No way 8 ball would make it. 😂 I say stick a blower on the caddy
Bro ngl this dude has inspired me to hot rod the hell outta my 87 trans am. But money is my issue and more importantly there’s like no info on these cars
Well first of all if you’ve got a welder, cutoff disk and a speedys snap and boom tube you can hot rod anything
There is plenty of information on 3rd gen f bodies out there lol they’re cake to work on, tons of forums and options for a nice 3rd gen, I hope to build one when I get my 4th gen all sorted the way I want it if that ever happens 😂
There is quite a bit out there for 3rd gens bud. Check out Detroit speed
I'm building a 350 and rebuilding my 7000r4to go in my 92 firebird atm
Love the “Dad” labeled Milwaukee battery. Better remember to put that back.
16:46 I smile every time you get these cars of yours running to there true potential, can’t wait for the rest!!
Great videos man! Keep up the amazing work!!
My favorite TH-cam channel
Hell yes to hearing its going to be an autocross build!
now we are waiting for masutangu
Love when I see a noise complaint video makes me 😊 !! The 9 inch install is my next one on my 71 . Keep up the great work brother
My miata has a janky swaybar setup rn too; loved seeing the similarities and love noise complaint!
Can’t say you dont love tom when he says he’s going to make noise complaint better than before and he delivers💯
after a really stressful week with bills and stuff, it’s nice to see a new tom’s video. good addition to friday.
Hey Tom, on Amazon they’re these things called gear kegs, they an air powered fluid transfer pump. Makes like so much easier
Ah yes the classic if it ain’t broke, break it for content trick. Genuinely the noise complaint videos are my favorite so if this was all Tom did with his channel i’d still be here every week!
Love getting home to watch Tom on Friday, ur amazing dude I love the mustang!🔥
Love noise complaint, but I havnt seen musutangu in long time either
8:42 if you have trouble, just ask Junkyard Digs, Kevin.👍
noise complaint is, without a doubt, one of the most sexy cars on the internet
the look and sound of it is just 👌👌
Refurbin my Tom until I get a noise complaint
man what a monster, noise complaint is def my favorite out of your collection
Noise complaint just has it all
We love CJ Pony Parts
CJ pony parts are coming in CLUTCH with all the stuff they've been sending you recently 🗣🗣
What a perfect timing to hop on TH-cam. Glad to see er back!
I loved seeing noise complaint on campus last year, glad you have it back in action!
And this is the perfect end of my day!! You, the man, Tom!!!
I've been waiting all week for a patron video and a TH-cam video !!!
Time for a 351 Windsor or Cleveland motor or a clevor engine Windsor block with Cleveland heads its a great set up for power and cooling
Every time I see the “Prius Repellent” next to the exhaust always makes me laugh 😂 love your vids Tom 🫶🏻
Another awesome Friday thanks to Tom🎉
so nice to hear this car again the noise of it is spicey 😁😍
Excelente auto mi preferido lastima acá en Argentina no hay autos así segui así perfecto como siempre
Magnificent video Tommy
That was crazy
Sounds good brother nice work can't wait to see what's coming to noise complaint
Love seeing that car get some love from tom.
Finally its back......nice ride ....love the content....
Nothing better than watching a new tom’s refurb video in my tom’s refurb merch shirt
This is my favorite series
Checkout the composite leaf springs from cj pony, they are great. Have you done the "Shelby drop" in the front yet?
MAN that 2 step is heavenly 15:16
I just realized. Tom is such a interesting specimen that I never realized his friends are always in the background but never talk 😂
The g in the back 😁
So refreshing to see a SEMA build finish on schedule
Clicked so fast!! Longer videos Tom. Forever a subscriber!!
I dont always refurb, but when I do, I refurb with Thomas.
The breaths that car takes between shifts just make it seem like it’s always right
Love the wheels on noise complaint
I love when tom pulls put his 8in
Exhaust at idle is so nasty. 🔥🔥🔥
9:59 CAMERAMAN I CAN"T SEEEE! 🤣
This man reminds me of somebody that I’ve seen and know but obviously I have never met him or anything you just give me that feeling of like I knew you in another life lol
Why do I feel like tom has been watching a lot of Kill Tony…. I Ain’t Ever Gonna Stop…loll and We'll be right back..lol I love it man
I have a personal request, I wanna put 2STEP on my 78 C10, just like u did on noise complaint, maybe u could briefly show how u did it?🙏🙏🙏
ITS BACK!!!
Honestly can watch videos on this car all day.
"It was good though, I'm bricked up" was out of pocket 😂
13:16 caught me SOO off guard 😭
Got it into third every time! Proud of you bro🎉
Will we see longer videos when your on school break? Glad to see Noise Complaint back on the road!
Tom never fails to make it work. No matter what it is.
The “give me a minute. Ahhh I’m gonna shut myself” killed me in the beginning 🤣
God Bless Tom 🗣️‼️
Hey Tom, love the car! I love the headlights especially! Do you mind sharing with me where you got them? I have a 66 Falcon I’m currently 302 swapping and I think those headlights would be killer.
Keep it up ! Your videos are great!
I need to see that exhaust setup ❤
Love the MakeShiftGarage reference at 1:16
I was gonna suggest a 9 inch out of a 4x4 f150, but it looks like you figured it out. Good yob tom.
The intro had me scared you were gonna crash into the side of another Mustang and make loads of bodywork for yourself 😂😂
Let’s build a motorcycle next
🔥🔥🔥🔥🔥🔥
Steve MaCqueen of the 2020s baby!
Glad to see that a proper rear end is in Noise Complaint now. One less thing to break... as easily. =-)
motor sounds great my god !
Go on bro I love the car and the fscalade 😂
Welp so much for going to sleep , Tom’s got a new video
This is great needed this
Nice Comeback!!!
This guy needs his own show
i’m up late at night, thinking of tom’s refurb. it causes me to start refurbing my tom til i leave a stang of mus on the wall.
Let's see that infiniti g35 in action!!!
Thanks for the video Whistlin Diesel
man that limiter just has something to it that makes my tom wake up
refurbin' my tom like crazy rn
Who would complain about such noises made by the stang?🔥🔥