Stefan, I've been watching your channel for a long time, but recently I suffered a major depressive episode. I wanted you to know that your videos are helping me in my recovery. They are so calming and help to keep away the panic attacks and intrusive thoughts. Thank you again for everything that you do!
Stay in the fight brother. Everyday is a new day, and the forest is always dark and scary until you find the path to the edge. Keep searching for the path and keep your head up. You got this!
To be aware of those thoughts and recognise that they aren't helping is the best thing you can do. I'm glad you've done that. Stefan's work really is soothing to a lot of us :)
I am sad to see the Deckel tool grinder gone. I was looking forward to seeing it featured in more videos in the future. There are endless possibilities for setup for complicated tools with all those wonderful accessories.
fantastic stage by stage, simple setup that resulted in more accuracy than required was good to watch and indicated to me what can be done in a 'home' shop. thanks Stefan.
Thanks again for an entertaining and informative post Stefan. I've been watching your channel for a while now, and have been surprised and impressed by your willingness to change or remove equipment to suit your changing needs. Some of the machines you have had were real beauties. I suppose if you had unlimited space you might still have the pantograph just for how wonderful a machine it was.
I have Clough42's electronic leadscrew, and it's amazing! I'm just a hobbyist, so I don't rely on it to make money, but I'll never use change gears again. It's so much easier. I know old school machinists sometimes don't trust "new fangled" technology, but if you are looking for efficiency and speed, an ELS is the way to go.
I use a lot of new fangled electronics, dont worry :-) I just prefer my lathe to be in its most important functions to be dead reliable, beyond electronics.
You always present informative content! It helps visual learners to actually see the interface of the parts in the final position, but the narrative fulfills that purpose. How much do you appreciate that new lathe 😂. It sounds wonderful, and you seem to have acclimated to it almost instantly. Thanks for sharing your experience. And the editing was (as always) terrific!
Wonderful attention to detail. I have to think the tool would have cut plastic OK without dressing on the diamond wheel, but doing the job correctly is a mind set that carries through all things in a very positive way. EDIT: Ah but then I remember the delrin is for test only. Very good! Thanks for bringing us along!
I am at the very early pre-stages of tool and cutter grinding. I say pre-stages, because I haven't even turned the machine on yet and I still have to figure out what I am doing. But watching your videos continues to inspire me that I will at least have some modicum of success because of what I have gleaned.
7 minus a little bit and 7 plus a little bit - welcome in my world of agricultural machinist precision! The difference is the real size of that little bit.
I have been a subscriber for about 8 years now and I can truthfully say that I have enjoyed each an every video. I was wondering if you ever miss the shaper. It seemed when I first started with your channel that the shaper was the main tool in your shop. Things have changed mostly for the better. Keep the videos coming! KOKO!
Great to follow how Stefan resolved the grinding methodologies. I wondered if Stefan had forgotten to grind a tip radius. Phew, saved by a spot of hand finishing ... marvellous.
Ahhh i am Drooling after such a bema and punch grinding fixture . Your new microscope is nice , realy your shop has so many admirable things. btw , nice that u did a new toolgrinding video for a nice sunday evening . i love those
Again perfect work! I know that you avoid certain chemicals in your rooms as a precaution. Aren't you afraid of inhaling the carbide dust? Despite the extraction system, the dust still ends up in some filter that needs to be disposed of or even cleaned
Class H dust extractor, overhead air cleaner and if i feel its necessary, a ffp2 or p3r mask. Cleaning the dust extractor is a whole deal, with a mask and slow, to not throw up dust. Also having the air cleaner run while doing that.
They also work to mask off chuck pinon holes for those positions you don’t use to tighten, but compress down if you decide to use the other positions to loosen the chuck, as well as masking off tapped holes In work pieces for media blasting.
That's a beautiful tool you've made there. Given the same challenge and what I have to work with I'd sure be inclined to try either using a warm fitting as a tap to form the threads, or to cut one into the shape of a tap.
I was hoping to see some more tool grinding on the big S1 tool grinder. All of those different adjustments you could make, I would have loved to have seen a carbide end mill with 6 flutes being put to task.
What a beautiful surface grinder. That machine has some amazing features. What model is it? If you don’t mind sharing. Thanks for the video, very informative and entertaining as always
Hello Stefan, thanks for sharing all the cool stuf that you make. You have really nice equipment. You mentioned in the video that you would like to have a 100X mag Profile Microscope. It would be cool if you make a video over the Profile Microscope how it works and the magnification. Do you have loupes and in which magnification are those? Thanks for sharing.
Hi Stefan, thank you for your videos! You are doing a great job!!!👍👍👍 I have a question regarding the threadcutting on a lathe. Maybe the question does not quite fit to the topic of this video. But still... What do you think about the technique I have seen in videos of the anglo-saxon world to set the compound on an angle for threadcutting? What do you think are the benefits of this approach? In Germany it´s not very common. Greatings from Hamburg
Tool grinding video! .... How do you store those tools? In case you are able to find it in five years, when you need it again, it might become "economical" 🙂
most people go watch a movie. stefan go's into his workshop and grind a carbide turning tool. each there own as they say xD btw when the cej mikrokator 510-9 getting pulled out or would a 510-7 be good enough xD not gonna lie. acutally really want a 510-7 myself though not easy to find ( only found one on ebay for a extreme about of money )
I use a flex VCE 44 H AC shopvac which is suitable for dangerous materials, one of those ceilling mounted air cleaners like woodworkers have and if I feel that dust extraction is a problem due to weird setups, I put on a FFP2 or P3S mask.
35:56 Nice microscope/computer, but call me difficult since I would prefer 55.0557° over 55°03'34" 😅. At least when I'm not talking about longitude and latitude.
Very interesting video as always. I do mourn the loss of the weird and wonky grinder. As I know you like to be a little bit pedantic, you might be interested to know that Nikon is pronounced with a short I, like Nippon. Nikon is actually short for Nippon Kōgaku.
"Tabellenbuch metall" - theres a english version too: www.europa-lehrmittel.de/Mechanical-and-Metal-Trades-Handbook/1910X-4 But I also use the engineers blackbook, also a very good reference book.
No top flat on the tool shank? I really prefer boring and threading bars with a flat. I find it makes them much easier to set up. I would make no assumptions that plexiglass will thread nearly as nicely. My experiences with it have been problematic
Hey Stefan. Just a query about the clocking of the carbide bar. When clocking in an eccentric feature don’t you double the desired value and dial that in. E.g. for 4mm of eccentric (distance between centres of rotation) you dial in 8? As the part should move 4mm above and 4mm below the centre of rotation? It’s the way I was trained during my apprenticeship. Or by throw were you referring to the overall travel of the part? Loved the video!! Many thanks
Appologies for not watching through a 40 minute video, but why did you choose solid carbide to mill two small parts from plastic? Even HSS would be overkill here.
@@StefanGotteswinter If you think carbide grinds nice and quick I wonder what you consider difficult to grind. In a non-production environment I bet you've have trouble wearing out 0.3% carbon steel when all you are cutting is plastic.
@@StefanGotteswinter Lidl currently sells cheap Grinding stones , and the White side of my Fine Lidl stone is actualy perfect for dressing the PTD Resin bound wheels. i also have the Tyrolit counterpart of those White Dressing sticks and cant spot any major difference in both. Yeah well , maybe tyrolit is a technology Leader but this is not Rocket science and the fact that the lidl stone is only a fraction of the tyrolit makes me beleive i made a good buy :)
@@StefanGotteswinter just saying, at Lidl u can get a massive dressing stone for a fraction of the tyrolit,. Allthough for the Fine resin bound Grits i still use my Tyrolit fine dressing stick. its more trustworthy ;)
Stefan, I've been watching your channel for a long time, but recently I suffered a major depressive episode. I wanted you to know that your videos are helping me in my recovery. They are so calming and help to keep away the panic attacks and intrusive thoughts. Thank you again for everything that you do!
Stay in the fight brother. Everyday is a new day, and the forest is always dark and scary until you find the path to the edge. Keep searching for the path and keep your head up. You got this!
Praying for You brother. I suffered major depression and panic disorder for many many years.
I suggest relaxing videos are best combined with exercise away from the screen and carefully optimized meds :)
I am glad if they help out a bit :)
To be aware of those thoughts and recognise that they aren't helping is the best thing you can do. I'm glad you've done that. Stefan's work really is soothing to a lot of us :)
Nicely done Stefan! I agree completely about the versatility of the surface grinder.
ATB Robin
hi Robin!
hoping that all is well with you...any new videos planned?
Keep well, sir!
The 🇨🇦 🐻❄️ in 🇩🇪
Thank you Robin! Your approach to the surface grinder changed my view on it a lot!
I am sad to see the Deckel tool grinder gone. I was looking forward to seeing it featured in more videos in the future. There are endless possibilities for setup for complicated tools with all those wonderful accessories.
endless possibilities with possibly endless time investment 😅
The opening shot of this video is just gorgeous. Your photography (filming) setup between the lights and the lenses is beautiful.
Perfect for a Sunday evening a Stefan video with a cold pilsner 👌
Captain, it's saturday
@@snorkyfin1879 Not in Australia.
@@AraCarrano please excuse my ignorance and the lame joke
More fabulous content, thank you Stefan.
Always a pleasure to see a master at work!
fantastic stage by stage, simple setup that resulted in more accuracy than required was good to watch and indicated to me what can be done in a 'home' shop. thanks Stefan.
"home shop" might be a bit of a stretch for most people, but surface grinders are kinda acceptable:)
Awesome! Enjoyed. Was glad to see the directional results on the carbide as you have indicated before. Thanks again.
Thanks again for an entertaining and informative post Stefan. I've been watching your channel for a while now, and have been surprised and impressed by your willingness to change or remove equipment to suit your changing needs. Some of the machines you have had were real beauties. I suppose if you had unlimited space you might still have the pantograph just for how wonderful a machine it was.
I have Clough42's electronic leadscrew, and it's amazing! I'm just a hobbyist, so I don't rely on it to make money, but I'll never use change gears again. It's so much easier. I know old school machinists sometimes don't trust "new fangled" technology, but if you are looking for efficiency and speed, an ELS is the way to go.
I use a lot of new fangled electronics, dont worry :-)
I just prefer my lathe to be in its most important functions to be dead reliable, beyond electronics.
Hello Stefan, I enjoy your tool grinding demonstrations. This one is super! 👍
You always present informative content! It helps visual learners to actually see the interface of the parts in the final position, but the narrative fulfills that purpose. How much do you appreciate that new lathe 😂. It sounds wonderful, and you seem to have acclimated to it almost instantly. Thanks for sharing your experience. And the editing was (as always) terrific!
Thank you very much for the kind words :-)
Wonderful attention to detail. I have to think the tool would have cut plastic OK without dressing on the diamond wheel, but doing the job correctly is a mind set that carries through all things in a very positive way.
EDIT: Ah but then I remember the delrin is for test only. Very good!
Thanks for bringing us along!
I am at the very early pre-stages of tool and cutter grinding. I say pre-stages, because I haven't even turned the machine on yet and I still have to figure out what I am doing. But watching your videos continues to inspire me that I will at least have some modicum of success because of what I have gleaned.
Look forward to the "so I made a bunch more grinding wheel hubs" video :)
Thanks for sharing!
Haha, sorry no video on those - Making them was Stefan-Time
@@StefanGotteswinterabsolutely no problem, only mildly teasing after adding a bunch of cup wheels the surface grinder's quiver :)
7 minus a little bit and 7 plus a little bit - welcome in my world of agricultural machinist precision! The difference is the real size of that little bit.
I have been a subscriber for about 8 years now and I can truthfully say that I have enjoyed each an every video. I was wondering if you ever miss the shaper. It seemed when I first started with your channel that the shaper was the main tool in your shop. Things have changed mostly for the better. Keep the videos coming! KOKO!
No, I got everything that I wanted to learn out of that machine, no looking back :-)
Yup.....Im still holding my breathe waiting for the D-Bit Project to start back up! Good evening from Canada 🇨🇦
Editing a short one on the dbit grinder in the background - might release next month. :)
@@StefanGotteswinter YESSSSSSSSS!
Loved the Nikon! I always learn something nice from you.
Great to follow how Stefan resolved the grinding methodologies.
I wondered if Stefan had forgotten to grind a tip radius. Phew, saved by a spot of hand finishing ... marvellous.
Pretty neat STEFAN, you do some nice nitty gritty work 👍 You have some nice machining tools
Entertaining and instructive as always. It's the piece of candy in my notification queue.
Had to wait to watch this video until I had some time! Awesome stuff as always Stefan!
Ahhh i am Drooling after such a bema and punch grinding fixture . Your new microscope is nice , realy your shop has so many admirable things. btw , nice that u did a new toolgrinding video for a nice sunday evening . i love those
Cheers Stefan, another excellent video. Really looking forward to the measuring microscope video when that comes out. Good onya, thanks again.
Great precision grinding,Stefan.Thank you.
Again perfect work! I know that you avoid certain chemicals in your rooms as a precaution. Aren't you afraid of inhaling the carbide dust? Despite the extraction system, the dust still ends up in some filter that needs to be disposed of or even cleaned
Class H dust extractor, overhead air cleaner and if i feel its necessary, a ffp2 or p3r mask. Cleaning the dust extractor is a whole deal, with a mask and slow, to not throw up dust. Also having the air cleaner run while doing that.
Ah, I see, you need a safety vacuum cleaner for that - at a corresponding price... Do you have a recommendation?
Just getting a tour of all the coolest tools today!
good video stefan..thanks for your time
Ear plugs! Brilliant! Imagine would work on large hex screw heads in applications where they collect chips on mills & lathes as well. Love it
They also work to mask off chuck pinon holes for those positions you don’t use to tighten, but compress down if you decide to use the other positions to loosen the chuck, as well as masking off tapped holes In work pieces for media blasting.
The earplug trick is so clever!
Thanks for the video. It would have been nice to see the surface finish with the microscope of the final tool but maybe another time then. Thanks!
Outstanding job!
That's a beautiful tool you've made there. Given the same challenge and what I have to work with I'd sure be inclined to try either using a warm fitting as a tap to form the threads, or to cut one into the shape of a tap.
Viele Grüßen! Nice to see these great "basic tools" videos!
Thanks! - For as much as a surface grinder qualifies as a basic tool :-|
Another great video! Thanks again!
I was hoping to see some more tool grinding on the big S1 tool grinder. All of those different adjustments you could make, I would have loved to have seen a carbide end mill with 6 flutes being put to task.
Encore une démonstration de ton grand art , super boulot
Nice job as always thank you.
Working for Krones AG I have acquired all these odd ball tools.
"Not in the right mood for that today"... suddenly took a dark turn :p 28:07
Tommorows engineering today, great content Stefan, 👌
28:26 those phillip head earplugs 😂😂😂
What a beautiful surface grinder. That machine has some amazing features. What model is it? If you don’t mind sharing. Thanks for the video, very informative and entertaining as always
Hello Stefan, thanks for sharing all the cool stuf that you make. You have really nice equipment. You mentioned in the video that you would like to have a 100X mag Profile Microscope. It would be cool if you make a video over the Profile Microscope how it works and the magnification. Do you have loupes and in which magnification are those? Thanks for sharing.
Hi Stefan, thank you for your videos! You are doing a great job!!!👍👍👍 I have a question regarding the threadcutting on a lathe. Maybe the question does not quite fit to the topic of this video. But still... What do you think about the technique I have seen in videos of the anglo-saxon world to set the compound on an angle for threadcutting? What do you think are the benefits of this approach? In Germany it´s not very common. Greatings from Hamburg
Its half a micron wide plus or minus a little bit! Superb
"Or use a cup wheel as a normal person would."
While i'd never describe myself as "normal" by any means, i just bought G taps for pipe threads. 😂
Tool grinding video! .... How do you store those tools? In case you are able to find it in five years, when you need it again, it might become "economical" 🙂
Another great vid. Keep um coming dude
Well done 👍.
when grinding the back side of the tool with the cup wheel on backwards... can you run the spindle in reverse so you are grinding towards the carbide?
Excelente trabalho
can u give us a link for your spin fixture? Thanks!
Thank you, excellent!
Where do you buy the ultramicrograin solid carbide blanks? :)
Usually from pHorn.
most people go watch a movie. stefan go's into his workshop and grind a carbide turning tool. each there own as they say xD
btw when the cej mikrokator 510-9 getting pulled out or would a 510-7 be good enough xD
not gonna lie. acutally really want a 510-7 myself though not easy to find ( only found one on ebay for a extreme about of money )
Hi - love the channel. which reference book is that at the start?
Ahoi! Thats the Tabellenbuch Metall:
www.europa-lehrmittel.de/Tabellenbuch-Metall-mit-Formelsammlung/10609-49
Do you do anything else besides use a (HEPA?) shop vac (?) to deal with carbide dust such as a personal respirator, shop air filtration system, etc.?
I use a flex VCE 44 H AC shopvac which is suitable for dangerous materials, one of those ceilling mounted air cleaners like woodworkers have and if I feel that dust extraction is a problem due to weird setups, I put on a FFP2 or P3S mask.
Oh no, sorry to hear about your wheel guard falling off. Man that seems to be such a common issue with surface grinders...
To be fair, I only would do that with super abrasive wheels smaller than 125mm, not with regular aluminium oxide or SiC wheels.
You could start digging a secret tunnel for a shop expansion.
"Welcome to my secret end-of-the-world bunker"
@@StefanGotteswinter I thought most of those in Germany had been turned into pubs a machine shop seems like a better use. :-)
What about the Taper of the pipe thread? You cut a cylindrical Thread?
Theres tapered and straight pipe threads. This fitting/thread combination required a straight thread.
@@StefanGotteswinter thanks
@@chucktodd7329 FWIW, there are 2 U.S. pipe thread standards: NPT (tapered) and NPS (straight).
Great work buddy. It's always nice to see a beautiful finish on a tool like that.
Awesome
What book was shown at 1:25?
Tabellenbuch Metall:
www.europa-lehrmittel.de/Tabellenbuch-Metall-mit-Formelsammlung/10609-49
well that's a cute dino mug
Got to clean the stain.
@@robertklein1316 thats just seasoning
Did you use any special material to print the gear?
Cheap Pla, 3 Perimeter walls, 0.3mm layer
Hey Stefan. What is the name / model of the indexer? Thanks.
Thats a punch grinder / spin fixture. Harig makes one, called "Grind-all", mine is a rebranded "GinTech" from Taiwan.
35:56 Nice microscope/computer, but call me difficult since I would prefer 55.0557° over 55°03'34" 😅. At least when I'm not talking about longitude and latitude.
Very interesting video as always. I do mourn the loss of the weird and wonky grinder.
As I know you like to be a little bit pedantic, you might be interested to know that Nikon is pronounced with a short I, like Nippon. Nikon is actually short for Nippon Kōgaku.
(I might be the most anti-pendantic person around, but I appreciate the hint on the pronounciation)
@StefanGotteswinter Didn't you just say that a three arc minute error on a pipe thread was just "okay"? ;-)
One more thought. I heart you! 😂
what is spindle taper on BEMA grinder-? -no reference to it on BEMA website
They use a Fisher/Precise spindle in the grinder, which have a 1:7.5 taper with a 14mm major diameter.
Hey, what's the name of the book you showed for the thread reference?
"Tabellenbuch metall" - theres a english version too:
www.europa-lehrmittel.de/Mechanical-and-Metal-Trades-Handbook/1910X-4
But I also use the engineers blackbook, also a very good reference book.
@@StefanGotteswinter I could have sworn it was the German version of the Black book of fasteners but I was wrong
Awww. You’ve cut the intro music haha. Good show mate. You should check this Belgian band called gnome out. Feel good hit of the summer.
Von welcher Marke sind deine Winkelblöcke?
Sind ganz günstige von ArcEuroTrade, irgendein Import. Haben sich beim Kontrollieren aber als ziemlich genau rausgestellt.
you don't fool me! . . . that's not 5x speed . . . it's the eight cups of coffee you had with breakfast.
Thats not far from true 😬
No top flat on the tool shank? I really prefer boring and threading bars with a flat. I find it makes them much easier to set up.
I would make no assumptions that plexiglass will thread nearly as nicely. My experiences with it have been problematic
Is the 30 arc-minute error due to the compound angle created by the 10deg clearance angle?
(I haven't done the maths on this)
Nope, going with the tilted spindle its not a compound angle error.
Oh no! The wheel guard fell off. What will we do?
On the new Lista Cabinett was some space for an GMO 3D :P
Ich dachte immer, die Fittinge ohne O-ring hätten konische R- statt G-Gewinde. Wie wird das dann gedichtet?
Die Fittinge haben eine seperate Dichtung, die auf der Fläche dichtet.
21:35 wow
Great video as always... Kern ? EDIT THE KERN VIDEO, lol..
In other words: The tool grinding is more exact than the optical inspection with a microscope.
Stefan, whilst you have the tool grinder setup you may wish to sharpen your razor 🪒😶🌫️ ❤👍🏴
I have a G3/8-19 tap if you want it?
Thanks, but it would mostly collect rust here :)
Comment for engagement
I feel some engagement!
10:30 need to whistle louder 😄
LOL, forgot to edit that one out. I do the whistle as a editing mark, because its very easy to see in the video editor.
Hey Stefan. Just a query about the clocking of the carbide bar. When clocking in an eccentric feature don’t you double the desired value and dial that in. E.g. for 4mm of eccentric (distance between centres of rotation) you dial in 8? As the part should move 4mm above and 4mm below the centre of rotation? It’s the way I was trained during my apprenticeship.
Or by throw were you referring to the overall travel of the part?
Loved the video!!
Many thanks
I think I got my words wrong here :D
I dialed in 4mm total throw (2mm above, 2mm below) to get my 2mm wide relief.
moin, moin,
(smartass here)
when kissing the top surface: didn't you grind out of the carbide?
Yep, not ideal :)
The kiss sucks out the soul of the carbide.
👍😎
👍😎👍
Appologies for not watching through a 40 minute video, but why did you choose solid carbide to mill two small parts from plastic? Even HSS would be overkill here.
Carbide grinds nice and quick, keeps an excellent edge and I have it at hand.
@@StefanGotteswinter If you think carbide grinds nice and quick I wonder what you consider difficult to grind. In a non-production environment I bet you've have trouble wearing out 0.3% carbon steel when all you are cutting is plastic.
@@rockets4kids HSS grinds a fair bit slower and doesn't create as nice a edge, so carbide it is. plus, now i have a carbide 55° tool for the future.
@@StefanGotteswinter lol.
Stefan your D25 wheel looks super clogged !!!
It is :)
@@StefanGotteswinter Lidl currently sells cheap Grinding stones , and the White side of my Fine Lidl stone is actualy perfect for dressing the PTD Resin bound wheels. i also have the Tyrolit counterpart of those White Dressing sticks and cant spot any major difference in both. Yeah well , maybe tyrolit is a technology Leader but this is not Rocket science and the fact that the lidl stone is only a fraction of the tyrolit makes me beleive i made a good buy :)
@@pirminkogleck4056 I have dressing stones for my diamond wheels.
Fantastic as ever
@@StefanGotteswinter just saying, at Lidl u can get a massive dressing stone for a fraction of the tyrolit,. Allthough for the Fine resin bound Grits i still use my Tyrolit fine dressing stick. its more trustworthy ;)
i think i also have OCD
i dont :)
Ma che due 🍐🍐
This will break very soon.
Very unlikely.
Thanks, very interesting!