Bought all the gear. The ATOTO head unit was $129 for black Friday so just had to do it. I watched several of these install vids, and bought the Spriral Audio harness for the install as I've got the Bose system. Total cost $489 for everything. I'll report back on how this goes.
Yellow/red were swapped on the harness for my VDO/Continental as well. Confused the heck out of me at first. I think they're backwards on the Alpine head unit in Josh's 996 as well.
Commenter from Europe here - FYI it's really common to find battery positive and ignition positive swapped in the factory wiring here. Some manufacturers (Vauxhall/GM spring to mind) had this setup for decades. It's so common that all ISO harness adapters here have bullet connectors in to easily swap them round without having to repin.
Your mileage may vary with that head unit. I had one in my Miata for a hot second before. I just got super annoyed with how bad the audio quality is. I replaced it with the joying unit, another Chinese brand, but that one died after 3 weeks and just never turned back on. Now I've got a JVC or pioneer or something that was about twice the price with less features but works a lot better and has better audio quality.
I learned to stay away from the chinese junk. I always ran Pioneer or JVC until this summer for a brief while and bought two chinese head units - and learned to just pay double and get quality. Replacing my chinese units with Pioneer...
True that I just stick with one of the big 4 deck brands.. I built up an SL55 AMG and tried the radio Tavarish installed and recommended and it was a total let down..
@@PatrickWalen I completely agree - been installing big four since 1989 and never had a problem until this spring with the china stuff. I made the mistake of putting my best system in the vehicle I drive the least and store 11 months of the year - going to put that in everything else after the china experience. By the way - the single din seller contacted me on their own saying the deck was garbage and gave me my money back six months later (just last week).
I'm probably in the small population that doesn't need or want car play. That being said, that looks really nice and matches the interior very well in my opinion. Very nice work!
Great installation video, JR! The unit fits well and looks almost as if is OEM. It seems to be a lot of head unit for the money and would be all that most people need. A lot of effort and brain work is needed but the result is worth it.
The harness in my 987 cayman was miss pinned as well. It was one of my favorite cars I had owned, super easy to work on when necessary. Only ever had one head scratching issue.
@@WatchJRGo I did actually, and I did it pretty much the way you did, except I didn't drill holes. Had to remove the inspection covers and ran it right up under center console. Only weird thing was it didn't like h hot starting after being filled with gas, ended up being a temp sensor that tells the ecu if the car is hot or cold.
JR, Harman Becker Automotive Systems (also just known as Becker) is part of Harmon International's automotive division (which also includes Bang & Olufson Automotive); Harmon International also owns AKG, dbx, Harmon Kardon, Infinity, JBL, and Mark Levinson, among others, and Samsung's owned them since 2017.
My last couple of stereos I have done through crutchfield and for an extra $25, they pre-wire the harness. Totally worth the time savings especially on my last one that needed a module to integrate into can bus and steering wheel controls.
Having wired the harness myself, I would generally agree with you. However for this vehicle, if it has Bose, you might as well wire it yourself if you're buying the fiber optic adapter separately because the harness adapter is only going to be 3 pins. Buying the parts separately vs. the bundle through Crutchfield would save you a couple hundred dollars on the fiber optic adapter alone.
Had that same headunit under a different name. I only paid about 30 or 40 bucks on Amazon and it worked way better than i expected...my only complaint waa sometimes in the winter it acted funky when it was super cold
Mine has the same issue with the cold. It makes zero sense to me. I bought mine after a buddy recommended it, but his started to overheat when it wasn't even hot outside. Maybe it's because the head unit is over the heater core in his Corolla, but the Sony unit he got to replace the Atoto doesn't have that issue. The Sony XAV-150 is like $150 more but it's so much better, I tried his and now I can't stand how laggy the Atoto is.
The aftermarket harnesses (Metra, etc) have always been wrong on VW Group cars of that era. I known some dealers that refuse to connect a diagnostic tool to the car if there is an aftermarket radio in it as many of the harnesses would backfeed voltage into one of their data lines on the VAG scanning tools they used...
Just the mention of the band Cartel at the end of the video… I haven’t heard that name in a long time. Thanks for making me wanna go listen to them again!
Nice clean install and the colored trim looks factory. I love these kits when designed well. I wouldn’t own a car now without apple car play. Drive safe and enjoy your trip!
I have a plateholder with rear camera on. So no drilling needed in the bumper and licenceplate light is integrated as well. Also a few leds are added next to the camera to give a bit more light when reversing in the dark.
You surprised me today when you said you went into the kitchen to clean your sticky part of with dish soap I thought you went to the kitchen to cook a nice healthy meal lol.Thanks for another great video John.
You are very lucky that you don't have the MOST optical fibre system that I had on my 2006 997 Turbo. I wanted to add a Parrot Bluetooth phone connection and an iPod interface that would display on the PCM screen. It took the professional car audio installers a whole day before it all worked.
HomeKit garage door opener is amazing. I have mine set to automatically open when I get within a 1/4 mile of home so I can just pull in. I was surprised when that started popping up after installing the garage door opener.
Nice reveal, I have have an old Kenwood in my 2012 Subaru, gives me ideas about swapping it out. Looking forward to the Arkansas run coming up, and that backup camera.
My first NC Miata had a iPod interface into the OEM sound system.. it would play "Hey Ya!" by Outkast whenever I connected my iPod or when something didn't work quite right.
I enjoy your install videos like this more than almost anything, bc it's best watching you nerd out. You also do a great job sharing tips from your experience doing this, too.
I have swapped my 2015 kia rio with a 120$ head unit like this and it works way better than stock base unit...no need for soldering and such, mine was plug and play, a 30 minutes job and soooo good! Came with the bezel so it is very easy to install! Cheap and easy upgrade, you should a video on those!Even kept the steering wheel control! People needs to test that out!
Great informative video, I have followed it and just fitted the Atoto S8 in my 987 Boxster. I bought the canbus patch lead to iso connectors, so it was plug & play out of the box. Just had to add a pin for ASK amp turn on. Got the reverse camera to fit & going to look for the illumination wire. The black locking tabs you cut off, I discovered all four foul the small screws that fasten the metal side plates on. I simply fettled them with my Dremel, which now allows them to push in easily. A brilliant video, many thanks 👍👍
This video is so useful to me right now. I bought a 987.2 Cayman S last week and need to do the head unit upgrade. It has the PCM 3.0 in it (their factory Nav), but it is dated. In my situation, I can upgrade the factory head unit for camera and wireless Android Auto for about $400. It will look 100% factory, since it is, but you are stuck with the old display and poor touch screen response. Porsche is releasing the PCCM+ (their upgraded head units) for the 987, but it is super expensive, only wired Android Auto and from what I can tell, no camera input. Hard no. I'm highly considering the XTrons unit (they have three, their top one), as it looks like a factory unit but it is about $500 after tax if you shop right, so a lot more than this. Of course I could go with the big-boy brands (Alpine, Pioneer, Kenwood, etc.) but they look just as aftermarket as the Android based units and really don't get you much for a lot more money. And now I have this to consider, as it has the things I want (AA, front/rear camera). Audio quality I'm not too concerned with, as the car is already loud with the Sould Performance exhaust on it. Also glad to see what this install entails. I do think running wires will be a bit easier in my Cayman.
But the PCM 3.0 had an backup camera option, I'd guess. Why wouldn't they carry over support to the modern one? I doubt it hasn't got backup camera inputs.
I want to thank you for bringing the ATOTO series to my attention. I was looking for a slim non DVD/CD playing touch screen head unit. I got the ATOTO F7 XE version that has the XM radio port in the back so I can use the XM SVX-300 tuner already installed in my car to allow me to use my XM subscription.
Atoto units are great. I have one of their high end premium ones with the Phillips Class A amp. Sounds awesome !. Its worth getting the "Atoto Steering wheel control". Its $25 and is wireless. The button cell battery lasts about 1 year. Personally i removed the strap and Glued it to my steering wheel. Now i can do all functions with my thumb while driving.
Well this one should a win, plus another you bought right so you can afford to deal with the issues and get your money back or better if you want to. I'd like to find a Android car unit that supports HD radio for my 06 Charger RT sometime. Jake could certainly use some help with his PT Cruiser from hell...
I think there are a few out there, they're closer to the $1,000 mark though. At this point I try to stream everything just to ensure I don't hear a commercial 🍻
I got a bunch of cheap Dual HD radio back in the day and they sounded excellent and the HD radio was super clean when you had a good lock and sounded like a cd. I might stuff one of them in the Charger but would love to have something modern, but probably not 1k worth 🤣
I love audio installation videos. I think cars are getting too advanced for me to do it myself anymore, so I can live vicariously through you JR. Nice work. The finished installation looked fantastic. Would love to know how it sounds!
Had a Atoto F7 XE in my MR2. Removed it because my old Pioneer 4000NEX sounded better. The MR2 speakers are small and never going to sound amazing. Might give the Atoto another try as my Pioneer is getting buggy.
Don't bother, just get another pioneer. All these Chinese units use the cheapest possible components. How else would they be able to offer so many features for so little money.
@@clintstathis I’d probably go Sony or Kenwood. Pioneer UI just always annoyed me. Kenwoods seem harder to use for most people but I’ve always liked them better. The Sony in my ranger was really good too. Granted when you spend all your time in CarPlay, the stock UI really doesn’t matter.
I like the Atoto S8. My only gripe that I have was self-inflicted, is there is quite a bit of static noise that comes from the speakers. I suspect the solder job I did is not the best. Also to anyone that gets an older version of the S8, please do the August 2022 update. That improves Carplay, and gives the head unit Wireless Android Auto capabilities.
A good head unit w excellent music maps and Bluetooth is a must. Totally agree that you need it and if you want it and like it that’s the right choice.
I tried to warn you out loud about that switched ignition issue. LOL I ran into the same thing on a Mercedes, where a "professional" installer had goofed it up. Poor previous owner went several years without any presets or clock. I had a Jeep Wrangler that would always start with the first song alphabetically like your Apple Music thing does (Abacab by Genesis). I took a .WAV file from Mechwarrior II and called it "Aaall", so when I started my Jeep, the stereo said, "Reactor, online. Sensors, online. Weapons, online. All systems nominal." LOL
8 years ago I put a Kenwood head unit in my 2009 C6 just after I bought it and paid $2,000. I saw Jake put that head unit in and now you, so I will never put a big name high dollar head unit in another car.
I like your choice, but I would have installed a small amp and dash cam while you were there. That thing probably puts out less than 10 watts per channel.
Good feedback on clipping the lower tabs on the faceplate kit. The HU I got blocks the lower tabs only from being pushed in, and if I didn't cut them, this thing would NEVER come out.
I would replace that T-Tap and just direct solder. Those things always cut the wire too far, and I've seen many of them fail and cause issues. Also, the grommet you added in the taillight, you may want to consider adding some sealant, the chances of water getting in are low, but the light is sealed at the back for a reason :)
Standard on most cars I mess about with when fitting a aftermarket stereo you have to swap the red and yellow wires over. In the UK the two wires have bullet connectors on for simplicity.
Look at harness 70-9401. That should be the proper one.. Its common for Ign and Batt to be switched on a few different types of cars that suggest the use of the 70-1784 harness.
If you need to take our your DIN style after market head unit bend 2 cloth hangers into U shapes that will fit in the 2 holes on each side. While inserted leverage the tools away to the sides while pulling out. It will release those tabs.. You can buy DIN removal tools, but you won't after you see the picture, you will bend your own wire...
I'm definitely on the side of "aftermarket head units suck and never look right", but this looks super clean, functional, and well done
Bought all the gear. The ATOTO head unit was $129 for black Friday so just had to do it. I watched several of these install vids, and bought the Spriral Audio harness for the install as I've got the Bose system. Total cost $489 for everything. I'll report back on how this goes.
Yellow/red were swapped on the harness for my VDO/Continental as well. Confused the heck out of me at first. I think they're backwards on the Alpine head unit in Josh's 996 as well.
Red and yellow switch around is very common. A lot of aftermarket loom kits have bullet connectors on red and yellow to allow the swap.
@@bobuilt10 Tru dat
It's important to not warn Jr of these things. He needs to have adversity in his life.
I bought this unit after you reviewed on your channel. Works great in my F150 beater truck. Thanks!
Commenter from Europe here - FYI it's really common to find battery positive and ignition positive swapped in the factory wiring here. Some manufacturers (Vauxhall/GM spring to mind) had this setup for decades. It's so common that all ISO harness adapters here have bullet connectors in to easily swap them round without having to repin.
Is there anything JR can't do? He never ceases to amaze me.
And it's the confidence of his abilities- well earned - that he approaches every project with.
@@P.Galore The acorn didn’t fall far from the tree.
he put a head unit in a car it's not exactly rocket surgery
@@Mouthy_Trucker I can't do it, so I'm amazed. Doesn't take much to amaze me because I can't really do anything.
Brain surgery maybe? Then again, with good schematics...
Your mileage may vary with that head unit. I had one in my Miata for a hot second before. I just got super annoyed with how bad the audio quality is. I replaced it with the joying unit, another Chinese brand, but that one died after 3 weeks and just never turned back on. Now I've got a JVC or pioneer or something that was about twice the price with less features but works a lot better and has better audio quality.
I learned to stay away from the chinese junk. I always ran Pioneer or JVC until this summer for a brief while and bought two chinese head units - and learned to just pay double and get quality. Replacing my chinese units with Pioneer...
True that I just stick with one of the big 4 deck brands.. I built up an SL55 AMG and tried the radio Tavarish installed and recommended and it was a total let down..
@@PatrickWalen I completely agree - been installing big four since 1989 and never had a problem until this spring with the china stuff. I made the mistake of putting my best system in the vehicle I drive the least and store 11 months of the year - going to put that in everything else after the china experience. By the way - the single din seller contacted me on their own saying the deck was garbage and gave me my money back six months later (just last week).
With that price you could just get a spare one and keep it on the shelf.
Yeah, those things are pure junk. Trash.
I'm probably in the small population that doesn't need or want car play. That being said, that looks really nice and matches the interior very well in my opinion. Very nice work!
Waze is invaluable if you are trying to avoid traffic a cops
I thought that until I got a new f150 and it's life changing. Will never own a vehicle without it.
As someone who has never owned an iphone, I guess I'm in that population too.
@@ingresswizard9044 So? just use it on a phone
@@joedunn1109 Android Auto is where it's at for us plebs
Use some duct seal to fill the gap where the exterior wires go through the grommet.
Great tip on using relay versus dedicated switched ignition wire on some models. Good stuff.
Great installation video, JR! The unit fits well and looks almost as if is OEM. It seems to be a lot of head unit for the money and would be all that most people need. A lot of effort and brain work is needed but the result is worth it.
The harness in my 987 cayman was miss pinned as well. It was one of my favorite cars I had owned, super easy to work on when necessary. Only ever had one head scratching issue.
Hopefully you didn't have to install a backup camera 😬
@@WatchJRGo I did actually, and I did it pretty much the way you did, except I didn't drill holes. Had to remove the inspection covers and ran it right up under center console. Only weird thing was it didn't like h hot starting after being filled with gas, ended up being a temp sensor that tells the ecu if the car is hot or cold.
only reason i stay up this late! thanks for doing what you do!
Thanks for staying up to watch! 💯
JR, Harman Becker Automotive Systems (also just known as Becker) is part of Harmon International's automotive division (which also includes Bang & Olufson Automotive); Harmon International also owns AKG, dbx, Harmon Kardon, Infinity, JBL, and Mark Levinson, among others, and Samsung's owned them since 2017.
Ahhh, I hadn't seen it branded like that before, makes sense! 🍻
They do own everything... BSS, Crown, Soundcraft. HiQ Net the world.
I think this is a great addition to your Porsche
Thanks!
Thank you! 🍻
My last couple of stereos I have done through crutchfield and for an extra $25, they pre-wire the harness. Totally worth the time savings especially on my last one that needed a module to integrate into can bus and steering wheel controls.
Great tip to share.
Never knew they did this-I have always done my own harness.. but them doing it for me is always nice 😂
I love Crutchfield. They sold me my surround sound system for my TV. The tech was excellent and helped me avoid spending too much money.
Having wired the harness myself, I would generally agree with you. However for this vehicle, if it has Bose, you might as well wire it yourself if you're buying the fiber optic adapter separately because the harness adapter is only going to be 3 pins. Buying the parts separately vs. the bundle through Crutchfield would save you a couple hundred dollars on the fiber optic adapter alone.
That head unit looks fantastic, doesn't even look odd like most aftermarket HU installs.
Had no clue this was available, just ordered the whole kit for my Jeep Wrangler. Thanks.
Atoto is a great Android stereo. I have one in my F150.
Had that same headunit under a different name. I only paid about 30 or 40 bucks on Amazon and it worked way better than i expected...my only complaint waa sometimes in the winter it acted funky when it was super cold
Mine has the same issue with the cold. It makes zero sense to me. I bought mine after a buddy recommended it, but his started to overheat when it wasn't even hot outside. Maybe it's because the head unit is over the heater core in his Corolla, but the Sony unit he got to replace the Atoto doesn't have that issue. The Sony XAV-150 is like $150 more but it's so much better, I tried his and now I can't stand how laggy the Atoto is.
The aftermarket harnesses (Metra, etc) have always been wrong on VW Group cars of that era. I known some dealers that refuse to connect a diagnostic tool to the car if there is an aftermarket radio in it as many of the harnesses would backfeed voltage into one of their data lines on the VAG scanning tools they used...
😳 luckily the only thing that I ended up using in this one was power/ground/speakers, the rest of it was all worthless.
they're typically crap for Subarus as well.
I’m an MECP certified installer, I usually run a new 8ga main line to a 75a relay on ignition that powers a new 12 fuse fuse panel
I'm committed to the cause here. Never thought that "I wonder what JR is up to tonight " would become a common thread 🤔 Great content lately!
Just the mention of the band Cartel at the end of the video… I haven’t heard that name in a long time. Thanks for making me wanna go listen to them again!
I am just amazed at the evolution of car audio components.
cool car, love it. What you like is what matters, oem electronics ages as fast as a pc.
Upgraded my 93 Land Cruiser to modern double din unit with all the bells and whistles in addition to back up camera. Sound is awesome now
I put an Alpine Carplay head unit in a 2002 Econoline, HUGE upgrade.
Nice Atoto unit, nice to see newer companies make good products.
Nice clean install and the colored trim looks factory. I love these kits when designed well. I wouldn’t own a car now without apple car play. Drive safe and enjoy your trip!
I remember installing a breathalyzer in a boxter. Giant pain in the back. Hated those cars ever since.
I have a plateholder with rear camera on. So no drilling needed in the bumper and licenceplate light is integrated as well. Also a few leds are added next to the camera to give a bit more light when reversing in the dark.
You should do a blooper reel video
Don't know if that would help him or destroy him.
You surprised me today when you said you went into the kitchen to clean your sticky part of with dish soap I thought you went to the kitchen to cook a nice healthy meal lol.Thanks for another great video John.
You are very lucky that you don't have the MOST optical fibre system that I had on my 2006 997 Turbo. I wanted to add a Parrot Bluetooth phone connection and an iPod interface that would display on the PCM screen. It took the professional car audio installers a whole day before it all worked.
HomeKit garage door opener is amazing. I have mine set to automatically open when I get within a 1/4 mile of home so I can just pull in. I was surprised when that started popping up after installing the garage door opener.
Very nice fit for aftermarket. That trim kit really brings it all together.
Nice reveal, I have have an old Kenwood in my 2012 Subaru, gives me ideas about swapping it out. Looking forward to the Arkansas run coming up, and that backup camera.
Would love to see you put in one of the Tesla style screens in the Ford. Yulu e9 Unit on Amazon looks insane.
My first NC Miata had a iPod interface into the OEM sound system.. it would play "Hey Ya!" by Outkast whenever I connected my iPod or when something didn't work quite right.
I enjoy your install videos like this more than almost anything, bc it's best watching you nerd out. You also do a great job sharing tips from your experience doing this, too.
I have swapped my 2015 kia rio with a 120$ head unit like this and it works way better than stock base unit...no need for soldering and such, mine was plug and play, a 30 minutes job and soooo good! Came with the bezel so it is very easy to install! Cheap and easy upgrade, you should a video on those!Even kept the steering wheel control! People needs to test that out!
Great informative video, I have followed it and just fitted the Atoto S8 in my 987 Boxster. I bought the canbus patch lead to iso connectors, so it was plug & play out of the box. Just had to add a pin for ASK amp turn on. Got the reverse camera to fit & going to look for the illumination wire. The black locking tabs you cut off, I discovered all four foul the small screws that fasten the metal side plates on. I simply fettled them with my Dremel, which now allows them to push in easily. A brilliant video, many thanks 👍👍
I've had my atoto f7 for over a year in my 4runner and love it. Great choice for any vehicle!
That's funny i worked at harman becker years ago and ran a smt line.
This video is so useful to me right now. I bought a 987.2 Cayman S last week and need to do the head unit upgrade. It has the PCM 3.0 in it (their factory Nav), but it is dated. In my situation, I can upgrade the factory head unit for camera and wireless Android Auto for about $400. It will look 100% factory, since it is, but you are stuck with the old display and poor touch screen response.
Porsche is releasing the PCCM+ (their upgraded head units) for the 987, but it is super expensive, only wired Android Auto and from what I can tell, no camera input. Hard no.
I'm highly considering the XTrons unit (they have three, their top one), as it looks like a factory unit but it is about $500 after tax if you shop right, so a lot more than this. Of course I could go with the big-boy brands (Alpine, Pioneer, Kenwood, etc.) but they look just as aftermarket as the Android based units and really don't get you much for a lot more money.
And now I have this to consider, as it has the things I want (AA, front/rear camera). Audio quality I'm not too concerned with, as the car is already loud with the Sould Performance exhaust on it.
Also glad to see what this install entails. I do think running wires will be a bit easier in my Cayman.
But the PCM 3.0 had an backup camera option, I'd guess. Why wouldn't they carry over support to the modern one? I doubt it hasn't got backup camera inputs.
Green wire in the other connector that only has three wires, is your ignition switched wire.
I love the 2pm upload time! Well, 2pm for me...
Now the 4th TH-camr I’ve seen put in an ATOTO. I am now SOLD!
I want to thank you for bringing the ATOTO series to my attention. I was looking for a slim non DVD/CD playing touch screen head unit. I got the ATOTO F7 XE version that has the XM radio port in the back so I can use the XM SVX-300 tuner already installed in my car to allow me to use my XM subscription.
Impressed by your 12v knowledge. 100% right.
Atoto units are great. I have one of their high end premium ones with the Phillips Class A amp. Sounds awesome !. Its worth getting the "Atoto Steering wheel control". Its $25 and is wireless. The button cell battery lasts about 1 year. Personally i removed the strap and Glued it to my steering wheel. Now i can do all functions with my thumb while driving.
I second this. I used 3m double sided tape and my battery is ongoing for a year now and i believe they sent a spare as well
Well this one should a win, plus another you bought right so you can afford to deal with the issues and get your money back or better if you want to.
I'd like to find a Android car unit that supports HD radio for my 06 Charger RT sometime. Jake could certainly use some help with his PT Cruiser from hell...
I think there are a few out there, they're closer to the $1,000 mark though. At this point I try to stream everything just to ensure I don't hear a commercial 🍻
I got a bunch of cheap Dual HD radio back in the day and they sounded excellent and the HD radio was super clean when you had a good lock and sounded like a cd. I might stuff one of them in the Charger but would love to have something modern, but probably not 1k worth 🤣
I love audio installation videos. I think cars are getting too advanced for me to do it myself anymore, so I can live vicariously through you JR. Nice work. The finished installation looked fantastic. Would love to know how it sounds!
Had a Atoto F7 XE in my MR2. Removed it because my old Pioneer 4000NEX sounded better. The MR2 speakers are small and never going to sound amazing. Might give the Atoto another try as my Pioneer is getting buggy.
Don't bother, just get another pioneer. All these Chinese units use the cheapest possible components. How else would they be able to offer so many features for so little money.
@@clintstathis I’d probably go Sony or Kenwood. Pioneer UI just always annoyed me. Kenwoods seem harder to use for most people but I’ve always liked them better. The Sony in my ranger was really good too. Granted when you spend all your time in CarPlay, the stock UI really doesn’t matter.
I like the Atoto S8. My only gripe that I have was self-inflicted, is there is quite a bit of static noise that comes from the speakers. I suspect the solder job I did is not the best.
Also to anyone that gets an older version of the S8, please do the August 2022 update. That improves Carplay, and gives the head unit Wireless Android Auto capabilities.
Ayy yeah I never realized that my wireless AA issue was that it needed updating and it's been great
A good head unit w excellent music maps and Bluetooth is a must. Totally agree that you need it and if you want it and like it that’s the right choice.
This will become one of your most watched videos. Fantastic work and on behalf of many, a massive thank you !
I tried to warn you out loud about that switched ignition issue. LOL
I ran into the same thing on a Mercedes, where a "professional" installer had goofed it up.
Poor previous owner went several years without any presets or clock.
I had a Jeep Wrangler that would always start with the first song alphabetically like your Apple Music thing does (Abacab by Genesis).
I took a .WAV file from Mechwarrior II and called it "Aaall", so when I started my Jeep, the stereo said, "Reactor, online. Sensors, online. Weapons, online. All systems nominal."
LOL
Should have changed out the temp controls too. Did that on my 06 when I changed the radio. Makes it all look new.
bought one of those when they started selling on Amazon for $169 bucks... it's excellent for what it is...
Man I forgot about that one lol you have bought so many in the past few weeks
Me too, but I had to get it finished before the road trip! 😂
8 years ago I put a Kenwood head unit in my 2009 C6 just after I bought it and paid $2,000. I saw Jake put that head unit in and now you, so I will never put a big name high dollar head unit in another car.
Thanks for this! Just sent all this to my Amazon cart for the Boxster S I’m picking up soon. Gotta have modern amenities. Lol! 🙏
Thanks JR! I just used your discount code on this for my 2008 Saturn Sky.
OBD2 would be great to also have in the Radio/Head unit. There are some around with that feature (probably latest Android version)
I like your choice, but I would have installed a small amp and dash cam while you were there. That thing probably puts out less than 10 watts per channel.
I paid $170 for it with a coupon. BTW you have brightness control on your home screen. It's the sun icon (toggles between sun, half sun and moon).
Solid content and you are on it. Excellent tip when installing infotainment in cars and trucks. More please!
That looks so clean-that is the main thing. It looks like it always belonged there.
Looks great!! Now I know where to go for electrical upgrades on my 66 Cuda!
Good feedback on clipping the lower tabs on the faceplate kit. The HU I got blocks the lower tabs only from being pushed in, and if I didn't cut them, this thing would NEVER come out.
Great headunit install.
I would replace that T-Tap and just direct solder. Those things always cut the wire too far, and I've seen many of them fail and cause issues. Also, the grommet you added in the taillight, you may want to consider adding some sealant, the chances of water getting in are low, but the light is sealed at the back for a reason :)
Bought this based off Jake's reviews, looking forward to installing it in the 2000 Silverado 4.8 I just picked up.
When installing any aftermarket head unit to German cars & trucks the 12 volt constant & 12 volt ignition are nearly always reversed. 😀😀
5x5, brother. Impressive diagnostics btw.😁
I would have skipped the backup camera it’s so easy to see behind a Boxster anyway
don't forget to seal the reverse camera grommet beside the tail lamp gasket, otherwise your trunk will floor with water.
I have heard several good things about that headunit. Good install. 👍 Matt
Standard on most cars I mess about with when fitting a aftermarket stereo you have to swap the red and yellow wires over. In the UK the two wires have bullet connectors on for simplicity.
jensen makes a sub $300 wireless carplay/android auto with capacitive screen too with good reviews
Look at harness 70-9401. That should be the proper one.. Its common for Ign and Batt to be switched on a few different types of cars that suggest the use of the 70-1784 harness.
I'm sure the WiFi antenna is for the wireless AA/CarPlay since Bluetooth can't transmit the amount of data required.
I need one like this for my 997. Mine goes crazy.
cut your wires at 5mm intervals. reduces the bulk of 20 joints at the same length
glad you are having fun with the Boxster. It will grow on you more and more.
Great video. Love the unit. Wish there were one to replace the 16 Audi A3 I just bought.
I've always loved white Porsches.
Harman Becker did the head unit for my 2012 C Class Mercedes
I think the Metra manual mentions that in the Boxster, the 12V IGN and BAT are switched
Loved the video, cool install and the dash kit looks amazing!
Looks great in there! Nice to see the full process and potential issues anyone could run into.
Reverse wire for the backup camera on my 987.2 CS is under the driver's seat.
If you need to take our your DIN style after market head unit bend 2 cloth hangers into U shapes that will fit in the 2 holes on each side. While inserted leverage the tools away to the sides while pulling out. It will release those tabs.. You can buy DIN removal tools, but you won't after you see the picture, you will bend your own wire...
That radio looks amazing and for that price, definitely worth it.
I have it on my Saab 9-5 for the last 6 month and it works amazingly well so for. and for 100usd well worth the cost
Wish you had the Bose unit to swap out... Like mine :) maybe you should do a trip to Kansas City to do that video! Come do my 987S!?
Love the collabs with 100%Jake.
the extra 12v outlet if factory its not keyed so its hot all the time
Wow it went from $189 to $209 ($197 with your code or coupon) in one day...
How’s the shop/house hunt going?