Common Brother Sewing Machine Problems: Causes and Remedies
ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2024
- Troubleshoot common sewing machine problems with Brother brand ambassador, Angela Wolf. Let tension problems, bobbin problems, and bunched fabric be things of the past.
Common sewing machine problems and remedies include:
0:00 - Troubleshooting your stitches
0:29 - Tension issues
1:01 - Clicking in the bobbin area
1:15 - Fabric or thread get stuck?
2:27 - My machine won’t sew
__________________________________________________________________
Find more Brother Products here: bit.ly/3PIh0ZO
_____________________________________________________________
If you are having any technical issues, visit: bit.ly/3lXMVYF
For any general questions, visit our Facebook page: / brothersews
#BrotherSews #SewingMachineTroubleshooting #FAQs - แนวปฏิบัติและการใช้ชีวิต
You breezed so fast through those tension issues at the beginning - you didn't show if the stitches were different at the different tensions
I agree Patricia; I wanted her to explain about the tension spring in bobbin area; my bobbin is jumping and clunking; and the bottom stitching is really tight! So can anyone help with this plz?
Would’ve been SOOOOO helpful
Agreed. I need to see a slow close up of what those look like!!!
I need to see exactly how Angrla’s three dials are set..I am going crazy!
@@jillsmith5687 how do I fix the tension in my bobbin thread
For me, it was a loosely threaded bobbin. I just put a new bobbin on the winder, and re-wound to the new bobbin. Fixed my tenstion problem. I do appreciate how the tension adjustment was shown - I had no clue! This is a good troubleshooting video, thanks!
Thank you for watching Charlie and we are glad that you found the video helpful!
The tension knob!!!!!! Thank you for your help!
This 1000% did not touch on ANY of the issues I'm experiencing! 🤦🏻♀️
Same😢
@@Mataylor17 mrp
2sat.frog
same@@Kandaharkitchen-onlyorganic
Me too. I hate this machine.
Me either. The part on top looks like the wire might be in wrong pasotion. I do not know where it goes?
Thank you woman! You deserve a reward.
Wow the tension stitches were explained so well.
Here is a link that may help with tension as well:
help.brother-usa.com/app/answers/detail/a_id/129182
If you need any further assistance, please contact Brother Customer Service at:
www.brother-usa.com/support
Had an issue with my FS101, was getting bird nests underneath each sewing start, for about 1 to 2cm birdnesting. Studied TH-cam videos for hours and tried everything, nothing solved the nesting. New needles, new and different thread, new threading, cleaning, nothing solved the birdnesting at the beginning of each sewing. Saw nothing wrong on the bobbins or the bobbin casing. Ordered by coincidence recently 2 spare bobbin cases. Gave it a try and changed the bobbin case and voila, no more bird nests at all. Even so I could not tell what was wrong on the "old" bobbin case, the replacement of the bobbin case was the solution to the problem. Just in case, as this is not mentioned as possible troubleshoot solution ;)
god bless you and your crops
I was getting so frustrated. Thank you so much, it totally fixed my problem with the nest!
What fixture problem? I couldn't follow the video.
Girl I could hug you!!!!!!!! You're a total life savor! I was sooooo sick of this sewing s--t! I came close to throwing it in the dumpster along with my expensive fabric. Couldn't figure anything out. It wouldn't feed through, and I had to pull it! You're knowledge has me on the road to a gorgeous little quilt, and I thank you so much! My husband thanks you even more 'cause now he doesn't have to hear me whining about it!
thanks Karen :) Happy sewing!
me too!
I followed the troubleshooting FAQ on Brother and watched this vid - which basically summarizes those FAQs. I am a good engineer and this Brother CS7000i has NEVER stitched anything without leaving a nasty bunched up mess on the underside. The top looks fine. However, even when I have a long stitch. It will start with a little bunch or hang. Then, I can continue for a couple of inches where it looks great and then randomly the last two inches are a rats nest. Fortunately, it is mostly when I am repairing my old work jeans. That material is 9 ounce twill and I am backing up the rips and holes with one of those (pathetic) iron patches that never iron on. So, I am doing only straight stiches with the correct default foot. Medium duty pure cotton twill thread on the needle and bobbin sides. Not one thing other than all default settings. Tension set between 1 and 2. Hand start and hand tack beginning and end (using the wheel, not the foot pedal). You can conact me here with any bright ideas!
We are sorry to hear that your CS7000i is not sewing correctly. Please see the links below for more informaton:
help.brother-usa.com/app/answers/detail/a_id/124056
support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=hf_cs7000ieus&faqid=faqh00000004_000
If you continue to experience the same issue, please contact Brother Customer Service at:
www.brother-usa.com/support
Hi @allanbruce9473 - did your machine continue bothering you or was there any "cure"?
You might want to show the tension samples for more than a split second.
Thank you so much! My dog ran through the cord that was stretched over to the outlet and my sewing machine flew through the air and broke apart on the floor. I got error code e6 so found your video. My sewing machine is working again! Thank you! My son just got interested in sewing and I was so upset that my machine got broken.
Thank you for watching and we are glad to know that your machine is working!
1:26 solved the issue with clicking noise for me, thanks a lot
This video helped to solve my GS3700 mechine problem.. Thank you
Thank you so much for this video! It came in handy! Thank you brother! 😁
These were all great tips & helpful. I'm a beginner beginner with a sewing machine. Thank you so much 👏
Thank you for watching Janice! We are so glad that the information was helpful.
I needed to see the bottom stitches each time you changed the tension. You just showed the top stitch
Agree
I agree.
Thank you so much. This was really helpful and fixed all my problems
'
Thank you for watching Ben! We are glad that the video was helpful.
My Brother GS3700 model ,only function normal stiching.nothing happened when I select others.appreciate your help
Thanks sooooo much!!!
I loved your explanation
Thank you for watching and we are glad that you found the video helpful!
Hi
I find the lighting on my Brother GS3710 is not great, how do I change the globe to get better light. Thankyou!
How do you fix the internal threading spring in position #3 on the Brother inovis 1750 d sewing machine? I can stitch about 15 stitches, then the spring sticks and I get an error message to check and rethread upper thread. Upper thread is fine, it's a problem with this spring that is supposed to go up and down with EVERY stitch, but doesn't. Thanks!
Good rips. Thanks.
I appreciate , very informative, thank you, learn alot.
Thank you for watching! We are glad that the information was helpful.
Thanks so much! I have a question and hopefully anyone can answer. When I back stitch, the thread from the bobbin get undone and I see loops through the top.
Thank you so much for sharing
@@BrotherSews I’m new to sewing. I’m going to try changing the needle. Wish me luck hehe. Another question, do you suggest to only use Brother bobbins? My husband bought me some bobbins to surprise me but they are Walmart brand, haven’t sued them just to be safe. Thanks in advance
@@legacycosmo I’m sure you’ve had a reply but if the bobbin fits into the bobbin spot, they’ll be fine. I have some that won’t fit on the spindle….? Whats that about?
I’m brand new to sewing. What my wheel thing on the right doesn’t turn enough to have the notches line up? I keep getting a majorly grinding noise, have been checking for lose threads in the bobbin area, etc, but no luck. I’m borrowing the machine from our local library and it’s a Brother CS-6000i. I’m afraid that I am somehow damaging the machine.
The knob for stitch selection has broken off is there any repairs available or is if some thing that cannot befixed
i have a SE 400 brother sewing and embroidery machine but the needle locked up is that a safety thing or what caused that i can’t get it to work
Hi,
I have brother sewing machine Ls-2125. Once I was sewing my dress. On my dress has a thicker embroidery when I started sewing the thread was broken. I also changed needles & different types of foot and stitches number. Can you tell me please problem.
Hello on the pot that you cut your thread does that part come off I have thread Stuck in number four when I’m threading the machine does the side piece come off the one that cuts the thread
do you know how to fix the error f05 speed sensor on a se400 machine?
my gx37 arrived a couple of hours ago. i watched 2 videos about the exact machine and did everything according to the videos. i am a master threader now both lower bobbin and the main thread. buuut my machine just wont sew. i hear the motor whirring but nothing moves. i checked the manual, the troubleshooting section. made sure the bobbin winder shaft is on the left. tried 3 different power outlets. nothing. i rethreaded the machine 3-4 times. it worked like 1 second when i first tried it. then nothing will make it work again. also again after that first time, the needle threader wont reach the needle anymore. when i pull it down and push it forward, the walls of the needle threader is short a couple of millimeters behind the needle.
Great tips but I have an issue that I can't figure out. I set the machine for a simple zigzag stitch and after I sew about an inch the length dial automatically rotates backwards to "0". What am I doing wrong?
Thank you so much ❤
Thanks , it helped
My brother xr9000 has F1 error. There is no authorized service center in my country. Any help in how to fix this??
It was definitely the tension that was messing me up 😩 my first time quilting and I’m using the walking foot. The bottom thread would just be a mess in the back and I was getting so frustrated why it wasn’t working. I checked everything from bobbin to replacing the needles. You said it might be tension and I put it up a bit higher and it came out perfect on the back!! If you’re using a walking door defiantly put it up around 4-5
Thank you for watching! We are glad that you were able to resolve the issue so that your stitches look great on the front and back of your quilt.
Hello I have a ae1700 brother sewing machine the hand wheel is steff please tell me what to do
I have a innovis 4000d I pushed the needle threader button then pushed it again before it finished now has malfunctioned and the display is showing tg-pm. Turned it of and on. Still nothing, any guidance would be greatly appreciated.
We are sorry to hear about your NV4000D malfunctioning. Please contact Brother Customer Service directly at:
www.brother-usa.com/support
Omg I just realized that my issue was right by the needle itself.....I kept threading it through the machine minus the piece right above the foot and needle🤦🏼♀️
How to replace the footplate cover plate to ensure the automatic thread cutter works. I took mine off to clean the fuzz out and now the thread cutter won't work. Everything else is working just fine.
Thank you for this video. However, I need help with my JC14 Portable Free Arm.
I was stitching a thick fabric and I discovered the needle bar shifted. So I took it for repair they couldn't fix it. I took to another technician and was told the Crank is broken and so the machine is now useless. What do you suggest I do about this please?
We are so sorry to hear about your sewing machine and this frustrating experience. You have reached Brother USA. Please use the Brother global locator link below to locate a Brother group to assist you with Brother products in your area:
www.brother.com/brgnet2/hsm/index.htm
@@BrotherSews Alright. Thank you so much.
@@BrotherSews I just clicked the link you sent and discovered I've done that few months ago. I found some contacts here in Nigeria. But after relating the issue with them. They suggested that I buy a new sewing machine instead of spending so much to fix the bad one. Even though they didn't tell me the cost of fixing it.
Am really disturbed about this situation.
Thankyou...You saved me from going to the service center 🙏
We are glad to know that this video was helpful! Thank you for watching Irene!
My GS2700 always making some bad understich, like the upper is neat but the under is Curly(?) nest or hanging , i've tried all the thing on the video but all is fail i still got the curly stich. Oh i'm sewing some cotton twill not that thick.
My machine is 6 wks old and now wont zig zag or other stitches. It will do straight but makes a loud knocking noise. I cant return it. Whats up? I've rethreaded it, replaced the needle and cleaned it.
If you please please tell me how I solve mypronlem it is my lower part of the cloth are coming out with huge tangle thread,how to solve?
What if the bobbin case spins with the shuttle?
Thank you very much can I vacuum bottle of sewing machine to get the debri out ?
You can use a cleaning brush or a small vacuum cleaner to clean out Your Brother XR3774 or similar sewing machine. Please see the link below for more information:
help.brother-usa.com/app/answers/detail/a_id/64226
My Brother JX2517 is having an issue for the first time since I bought it in 2017. As I’m ready to push the pedal to sew, the needle doesn’t move but I hear the machine or the machine’s gears inside trying to work or move. So I try to push and let go and push the pedal and then maybe after 10 times of doing this, it starts to sew but very slow then go fast after many stitches. Then when I stop after minutes, it goes back to the same problem again. Please let me know how to fix this? Thank you!
I am facing the same problem the needle does not move at all
Hello !
I have a Brother PS-2500. The pattern selector dial rotates all the way back and forth but the pattern does not change. It’s stack on 4/22 position on the display window.
Any way you could help me to fix this ? I called a service technician but the cost of checking the machine and fixing it is higher than buying a new machine. I love m’y existing machine and I have a sentimental attachment to it since it was my mother’s machine.
Thank you to anyone seeing this post and helping me to fix this.
It is frustrating when a machine is not working properly. We are sorry to hear that your pattern dial is not changing. We recommend you contact one of our Brother Authorized Service Centers for further assistance and to have your Brother PS2500 evaluated. You can locate the closest Brother Authorized Service Centers using the following link:
www.brother-usa.com/dealer-locator
PSA: Avoid brother machines, especially economy class (SE600 etc). They are garbage. The machines are so finicky. I've had it nest at random and jam up. I can't get through 1 pattern without any trouble, like ever. I find that I have to reinsert the bobbin, but before cutting it, i have to violently tug it through, only then will the bottom thread stop showing on top or the top thread nesting below. Slowly it deteriorates and I have to keep reseating it. Forget tension dials, they don't work, period. 1 - 9, all the same result. Hate this crap!
I tend to agree. I’ve had 2 brothers that give me constant issues. I need suggestions on what brand to buy.
I had a Pfaff , I bought in 1995. Used it without any problem more than 25 years. Then last year purchased a Brother in replacement to my Pfaff..no comparison, already having troubles with simple tasks and sewing properly with this machine.
Pfaff is the best.
Me too. They are garbage.@@Kaptiv8edme
@@Kaptiv8edmealso tell me 😊
I bought this exact machine last week it’s awful I usually love brother machines but mine is so noisy & vibrates badly I’ve asked seller if I can send it back as it’s definitely not right & as I see everyday I’ve had to buy another machine I’ve going back to the brother ls 14 which in my opinion is the best I’ve had 3 now & wanted an upgrade but this is definitely a down grade
Confusing. It seemed like you were trying to get through the video as fast as you could. It's not a useful video for beginners.
Any suggestions? I am trying to do zigzag, and it looks like a ladder stich on the front, and zigzag on the back. I have re-threaded the machine and bobbin, changed tension, and I am not sure how to fix it. I have a CS-6000I
We are sorry to hear that your zigzag stitch is not sewing properly. Please see the links below for more information:
help.brother-usa.com/app/answers/detail/a_id/128038
help.brother-usa.com/app/answers/detail/a_id/55602
help.brother-usa.com/app/answers/detail/a_id/55775
If you are still experiencing the same issue, please contact Brother Customer Service at:
www.brother-usa.com/support
My NV880e embroidery machine needle bar has started vibrating please help thanks 🙏🏼
We are sorry to hear about your Brother NV880E. You have reached Brother USA. Please use the Brother global locator link below to locate a Brother group to assist you with Brother products in your area:
www.brother.com/brgnet2/hsm/index.htm
Also make sure your pressure foot is in the up position.
What if it only catches one stitch and the needke slips out of the needle?
Hi: I'm not sure how to fix my presser foot. When I lower the lever, the foot snaps down with a lot of force, and feels like it is permanently stuck at the highest tension. Do you have any tips, or is the machine unfixable?
I know this is late, but there should be a dial or knob to turn to reduce the pressure of your presser foot. Check the manual for that, or look online.
What can I do to use brother sewing machine from the US that has 110v input in 220v mains?
We do not recommend using US models outside of the US, as they are manufactured for 120v use. Performance may vary between transformer manufacturers and as such we cannot guarantee results. I would recommend using the Brother Global locator to find a Brother facility nearest you, to purchase a machine manufactured for the voltage specifications for your area:
global.brother/en/gateway
Having a problem with my Brother 950D embroidery/sewing machine. Have a PES 4 inch embroidery pattern on a SUB stick that is not being recognized by the machine. What am I doing wrong?
It is frustrating when the design does not show on the machine or a usb is not working. Please see the links below for more information:
help.brother-usa.com/app/answers/detail/a_id/70510
help.brother-usa.com/app/answers/detail/a_id/152667
If you are still experiencing the same issue, please contact Brother Customer Service at:
https:www.brother-usa.com/support
What making the holes in a mustache end of sewing machine I gave it all brother machine
Does anyone have a PS-53 ? there seems to be a problem with the reverse lever as it makes no difference up or down, the machine only sews in reverse. Is there a setting that would fix this? TIA
It is frustrating when a machine will not sew forwards. Please see the link below for further assistance:
help.brother-usa.com/app/answers/detail/a_id/124798
If you are still having the same issue, please use the Brother global locator link below to locate a Brother group to assist you with Brother products in your area:
www.brother.com/brgnet2/hsm/index.htm
Tried the tension, changed the neddle, cleaned bobbin case area, but top stitch still not picking bottom stitch. Could this be a hook timing issue? How do i fix this gs2700 brother machine. Thanks.
@@BrotherSews Thankyou, appreciate it.
How do I resolve a problem when the fabric is not feeding when the needle is sewing?
My presser foot won’t go down!! I even unscrewed everything to try to fix it but can’t even get to it still because only one side came off :(
We are sorry to hear about your presser foot. Please contact Brother Customer Service directly at:
www.brother-usa.com/support
Hi, I ha e brotherLX27NT sewing machine. Sometimes, Inspite of cleaning lint and kepping the bobbin & underneath bobbin, one unpleasant sound remains as if , any part got detached internally. What could be the problem. Can you please explain. Waiting eagerly for your valuable response. Tq😊
You have reached Brother USA. We apologize for any inconvenience. Please use the Brother global locator link below to locate a Brother group to assist you with Brother products in your area:
www.brother.com/brgnet2/hsm/index.htm
What about the brother machine ce 1150 where there’s no tension dial???
The tension dial for the Brother CE1150 is located above the needle. Please see the link below for more information:
support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=hf_ce1150eus&faqid=faqh00101020_004
I have a Brother sewing machine just like the one in the video. However, it pulls to the left. How can I fix this problem?
@@BrotherSews Hi! I have the xm2701 model and my machine is stuck i reverse. Help!
My boyfriend drilled into the wall and my brother 2800 was filled with dust. It is not sewing a stitch. I cleaned out the bobbin case and it still doesn't stitch what can I do to fix it. I tried all that you did in this video but it's the same. Do you have any other solutions? Anyone ?
what do i do if my zig zag stitch isn’t picking up on the right side on a brother cs 6000i ? i can’t find any tutorials showing how to fix timing ?
It is frustrating when a zigzag stitch does not turn out correctly. Please see the link below to help with more information:
help.brother-usa.com/app/answers/detail/a_id/65145
If this does not resolve the issue you are having, please contact Brother Customer Service at:
www.brother-usa.com/support
I have a problem that...the needle is touching on the tension plate...and needle get broken....how can I fix it
What if you have done everything and it still doesnt see but the motor works?
my Brother CPV70 compter machine w/ 11 stitches modes won't reverse and stuck sometimes, also just running in straight line mode in very low speed . i just tried to screwed up and cleaning using air dust and put some oil but the reverse stitches still doesn't work. all stitches mode are perfectly working thou
Thank you for watching and your interest in Brother machines and products.
You have reached Brother USA. Please use the Brother global locator link below to locate a Brother group to assist you with Brother products in your area:
www.brother.com/brgnet2/hsm/index.htm
Hi, I have brother LX27NT. For past few days, My machine is making lot of noise and top thread is getting cut frequently. I replaced to new needle. Took off pressure foot, and also, removed needle plate by unscrewing. Removed all the lint, wiped with cloth and replaced everything in respective order. Still the problem is occurring. Please tell,how to set it right.? What could be the problem.? Eagerly, waiting for your suggestion. 😊
We apologize for any inconvenience. You have reached Brother USA. Please use the Brother global locator link below to locate a Brother group to assist you with Brother products that are available in your area:
www.brother.com/brgnet2/hsm/index.htm
Ok, that explains a lot. Could you please go into detail about the auto threader, there is nothing that explains it
Thank you for watching Joseph! Please see the video below for how to thread a mechanical sewing machine with or without the automatic needle threader:
th-cam.com/video/3fmnArUDSbc/w-d-xo.htmlcc_load_policy=1&rel=0
Quitting and unneeded keeps on breaking?
I did everything correctly from your cd device and bought the essential model, but thread from the stitches do not place through the fabric. What do I do?
We are sorry to hear that your machine is not sewing properly. Please see the link below for further assistance:
help.brother-usa.com/app/answers/detail/a_id/65149
If you continue to experience this same issue, please contact Brother Customer Service at:
www.brother-usa.com/support
How about the timing? Can we fix it without opening the cover?
Yes I need advice on that problem too
this helped but mine is still not picking up the bottom tread
We are sorry to hear that your sewing machine is not picking up the bobbin thread. Please see the link below for further assistance:
help.brother-usa.com/app/answers/detail/a_id/76369
If you are continuing to experience the same issue, please contact Brother Customer Service at:
www.brother-usa.com/support
The step 4 part of threading is not looking right on my machine. Someone help!?
Good morning, i have a brother's VX 1435 when sewing fabric not sewing. Can someone tell how to fix it please
We are sorry to hear that your Brother VX1435 is not sewing. Please see the link below for more information:
help.brother-usa.com/app/answers/detail/a_id/65149
If you continue to experience the same issue, please contact Brother Customer Service at:
www.brother-usa.com/support
Ive done all of these steps several times my machine is still making a horrible nest of thread on the bottom help
I’m having the same problem. I’ve watched several videos and have adjusted the tension, but nothing helps. I have re-threaded the bobbin and needle repeatedly to no avail.
@@elizabethmalone1079 i turned my machine off for a week and it started working again so it may of just gotten "mad"
I am a beginning who is self taught what is a good thread to use? For cloth and tulle
Thanks for watching Jessica! Please see the link below for thread,material and needle combinations for the Brother XR3774:
support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=hf_xr3774eus&faqid=faqh00000004_000
How much po
My tension got completely tight during sewing and machine stopped help
hi. good day. my brother sewing machine is no foot pedal. my concern is how can i thead the bobbin without pedal?
Thank you for watching. We apologize for any inconvenience. Please contact Brother Customer Service so we may be able to assist you further using the link below:
www.brother-usa.com/support
The bottom thread does not seem to want to stitch along with my top thread, it wouldn’t simply not connect to my fabric. I have tried rethreading the bobbin and the top thread, and I can’t seem to find the issue. Any ideas on how to fix this?
THAT is the problem I keep having! I was hoping to find an answer here - but she didn't cover it…..Funny thing is, I will go along fine sewing with different threads and different stitches, and then, suddenly, this problem will recur! No amount of tension adjusting and re-threading will solve the issue......
My bobbin thread is to losses, which top thread always bring it up. .cannot do any stitch now ....
Mine keeps snapping my thread and jamming, I've tried doing all this, changing thread types, fabric types, needle types.... everything
It is frustrating when the thread breaks or the machine jams. Please see the links below for further assistance:
help.brother-usa.com/app/answers/detail/a_id/124056
help.brother-usa.com/app/answers/detail/a_id/70852
If you are still experiencing the same issues, please contact Brother Customer Service at:
www.brother-usa.com/support
I have an issue it was working fine.. I was foinf a project simple straight stitching. it worked all day... Then I took my foot off the "the foot" to get another piece of material and it won't go... Nothing it just stopped... no bobbin problem... the light is on... you press the foot nothing happens the motor won't go is it the foot dead or the whole machine??? I'm baffled... it was working perfect and just stopped... can you help?? tyia
@@BrotherSews ty for such a prompt response. I called it may or may not be the foot pedal. Unfortunately, there's no dealer near me and I don't have a credit card for online purchases.. or anything left to spend after all the the others supplies I needed to do this project... it's.the end of my sewing road. Your customer service is remarkable just heartbreaking as it was keeping me busy and creating in these troubled times... It's just baffling I did over 10 yards in a straight run of mini "snip-it rolls" not one hiccup... took my foot off the the pedal and she went on strike... lights goes on and no one is home... thank you again to you and the brother team take care
My thread keeps coming out of the needle thread guide. How do I fix this?
Are you holding onto both of the threads at the back, when you start to sew? That will help.
My is Bobby problem that make it difficult to be used
She does stitches with little then a lot of tension but them doesn't SHOW you what they look like! My problem: I sewed fine 2 days ago. I didn't change the thread or anything. Now I just went to use it & the first couple of stitched made noise. Well when I manually & slowly moved the needle down (it is in the left position) it is banging into something below. You can see at that time that the needle is 'bending' a bit to the right. If it were to go straight down it surely would break. WHAT is the issue? Also I haven't been able to use the auto threader. To get the needle into the hook, I must push the needle by hand to the left to get in. But I still can't use it because the threader bar does not go low enough to line up behind the eye of the needle. Can this be adjusted somehow?
I forgot to mention, my machine is a cs6000i
Ok so I found that I had the bobbin thread facing the wrong way. WOW, who would think that other than having a crappy stitch that the needle would hit the plate below just from having a thread wrong way? Now I get an E6 error! For some reason now the auto threader lines up right. I tried about 30 times & got the thread to go through only once.
OMG you probably don't remember commenting this, but you totally solved my problem when this video couldn't 🤦🏻♀️🤦🏻♀️
I was going nuts trying to fix everything but it was just backwards bobbin thread LOL
@@rubydown3329 Funny I just happened to see your comment. Glad I was of help!
I need help if anyone could. My brother sewing machine motor is running but needle and feed dog doesn't move.but when i rotate the needle wheel, both moves.i am new to sewing. Please help!!
I think my presser foot lever is broken. When i push it down, the presser foot does not move down. It doesn't move at all... how do I fix it please?
needle keeps going through fabric and stabilizer getting stuck under. It happens every timeeeee. I’ve gone through like 10 shirts. changed needles, lowered tension.. idk what’s going on
We apologize for any inconvenience. We would like to help. Please contact Brother Customer Service at:
www.brother-usa.com/support
My NX400 just wont sew. Ive cleaned under bobbin & needle with brush & vacuum. Rethreaded & reset bobbin over & over again & changed tension setting. The balance wheel turns a little then freezes to a stop with LCD saying its a safety issue! Help, please!
We are sorry to hear that your NX400 is not operating correctly. Please see the link below to help with the "safety device has been activated" error message":
help.brother-usa.com/app/answers/detail/a_id/151940
If you are still experiencing the same issue, please contact Brother Customer Service at:
www.brother-usa.com/support
Dang, that's some bling.
So what’s the reason for the tread pulled and gathered in a nasty nest under the needle plate and even the fabric being eaten down there as well ? You just showed us how to remove the mess but how do I stop it from keeping happening? It’s happening all the time that I want to throw my new machine in the garbage 😭
i took my brotherst531hd to the shop for a timing adjustment and was told they are disposable machines that cannot be accessed to do internal maintenance or work on the timing gears. wtaf?!!!!!
We would love to hear more about your experience and further assist you with your Brother ST531HD. Please contact Brother Customer Service at:
www.brother-usa.com/support
How do you keep the thread from tearing or falling out. Im running into that problem
When the thread breaks or the upper thread comes unthreaded, it can be frustrating. Please see the links below for further assistance:
help.brother-usa.com/app/answers/detail/a_id/70909
help.brother-usa.com/app/answers/detail/a_id/74446
If you are still experiencing the same issues, please contact Brother Customer Service directly at:
www.brother-usa.com/support