Lesson of the day: never tell a non-cuber to scramble your square-1. Edit: did you actually paint the yellow face of one of your puzzles black by hand?
My mgc squan core broke within 1 month of ordering it so scs sent my a new one which didn’t have black edge caps for some reason so I took the edge caps from my old one and put it on the new squan then took a sharpie and colored the yellow edges of the old one
so damn right... one thing tho, "non-cuber's scrambles" is my favorite, 'cause you give them the cube and no matter how hard they try they won't get further then 2-3 slices. but then you take the cube and show them how it's done😎
3:28 YLM caps: Do a half slice and reach into the centre - the corner of the medium equator caps (the FR/BL cap) should be quite easy to pry on. Then you can run your fingernail or tool along the edge to reach the long equator caps.
Non cuber scrambles...lol fun fact: a non-cuber managed to BREAK two corners and an edge on my volt v2 while trying to slice... she gave me a dollar thinking it was cheap (i never break corners or edges)
I can relate to all of them except for the OBL pause, but im learning obl right now with Ox's tutorial, so I'm expecting to learn it by around Easter(I'm lazy)
Hey so I'm kinda early on the video so I'd figure I'd ask: I'm currently averaging around low 12s when warmed up for square1. All I need to learn at the moment is CSP and EP, which I'm starting non parity EP (as parity EP isn't important when I know csp in the future). What EPs do you recommend learning? I know most basic cases like opp opp, and the most "complex" case I know is W Adj
A good beginner squan is the Yuxin Little Magic, which is only 10$. But if you have the money, for 20$ I highly recommend the X-Man Volt v2. Also most people agree that the best squan method is Vandenburg. th-cam.com/video/IkmlMEHYyzI/w-d-xo.html Is a good beginner tutorial.
@@djko978 Oh that's a beginner tutorial. If you want to get more into squan solving then I guess learn all EO and CP algs (which there aren't that many) and learn scallop kite/scallop scallop for Cubeshape. th-cam.com/video/-fYJTvNSCdo/w-d-xo.html Is a good one for scallop kite cubeshape.
I think pops and parity parity dnfs were experienced by non square 1ers and maybe more of them hey list done somethings that you hate about cubing here
Because yellow and white have little contrast, and it’s hard to differentiate in some lightings, which is why black caps exist, or maybe it’s just looks cool I guess
Most of these things happen in the average Cube Master Twitch stream
For real
Lesson of the day: never tell a non-cuber to scramble your square-1.
Edit: did you actually paint the yellow face of one of your puzzles black by hand?
Tried to unsuccessfully lol
Even a cuber if he has never use that cube 😂
My mgc squan core broke within 1 month of ordering it so scs sent my a new one which didn’t have black edge caps for some reason so I took the edge caps from my old one and put it on the new squan then took a sharpie and colored the yellow edges of the old one
Everyone hates karnotation
Except cube master :)
This was 3
for the non-cuber scrambles you gotta make the slice half way cuz that's what they do lol
lmao ikr
so damn right... one thing tho, "non-cuber's scrambles" is my favorite, 'cause you give them the cube and no matter how hard they try they won't get further then 2-3 slices. but then you take the cube and show them how it's done😎
3:28 YLM caps: Do a half slice and reach into the centre - the corner of the medium equator caps (the FR/BL cap) should be quite easy to pry on. Then you can run your fingernail or tool along the edge to reach the long equator caps.
Non cuber scrambles...lol
fun fact: a non-cuber managed to BREAK two corners and an edge on my volt v2 while trying to slice... she gave me a dollar thinking it was cheap (i never break corners or edges)
Sad
1 flicking dollar?! for that?!
KWCuber ya...
@@zzRouxfop oof size: large
KWCuber yes.
Aa a non square 1 solver, half of these were **some letters** ecognition, with parity etc. Lol
I can feel these on a spiritual level.
3:12 Showing PLL+1 algs instead of PBLs: done
5:10 how you got your hands to shake like that smh 😭😭😭
When showing lots of algs at 3:16 you showed Lin Pll+1, are you switching to the superior method?
lin >
Yayyyy finally a good one of these "things cubers hate video"! thanks sam
A non-cuber scrambled my cube and it was kite/kite into cp with an ep skip after
The #1 Thing square 1ers hate
The volt v2
uh.. Maybe I don't get a Squan...
I can relate to all of them except for the OBL pause, but im learning obl right now with Ox's tutorial, so I'm expecting to learn it by around Easter(I'm lazy)
lol this video is very entertaining and fun! Keep it up Cube master!
No non cubers know how to turn a square-1
I can agree on number 3.
Also should I paint my yellow side lmao?
Why do people like black sides?
@@davidcejka253 Black is easier to distinguish from white than yellow. It doesn't really make a significant difference unless you're at least sub-20.
THE LAST ONE IS SO TRUE! NON-CUBERS TAKE SO LONG TO SCRAMBLE AND THE SCRAMBLE IS NOT EVEN THAT HARD!
So square-1ers hate every part of solving a square 1
LOLL that last one hits hard
today i gave like 6 different people my sq-1 and none of them could scarmble it beyond like 3 moves lol
how do you memorize and drill cs algs?
Wait why do you need black in the square one?
It makes it easier to recognise pieces on spuare-1.
@@cookiecuber1Oh okay
@@BlueBeanieJustin Hope I helped you!
@@cookiecuber1 Yep, you did, thank you
Are there any even even worse CS cases
Twistii Cuber the worst cubeshape is solved-kite
@@trangium no, it's very fingertrick friendly and both csp solutions are good
oi u forgot, bar flip from PB
I just want to know how to solve the thing and get the easiest algorithms to use that I'll definitely have
What is the reason for the card in the cube, it seems so pointless 🤔
It's to prevent the puzzle for turning when it's in a cube cover in a comp.
@@franklinpham6600 oh ok, thanks👍🏼
0:35 cubetwist square 1 be like.
Hey so I'm kinda early on the video so I'd figure I'd ask: I'm currently averaging around low 12s when warmed up for square1. All I need to learn at the moment is CSP and EP, which I'm starting non parity EP (as parity EP isn't important when I know csp in the future). What EPs do you recommend learning? I know most basic cases like opp opp, and the most "complex" case I know is W Adj
watch his intuitive ep video
learn all of them
@@amkuber8460 bet
learn lin :)
Some of these kinda apply for other cubes
What is the link to the document with all that notation?
1:19 rip Vincent’s 5
I want to start in sq-1's speedsolving, what cube i should buy?? And what is the best method to be fast?
A good beginner squan is the Yuxin Little Magic, which is only 10$. But if you have the money, for 20$ I highly recommend the X-Man Volt v2. Also most people agree that the best squan method is Vandenburg.
th-cam.com/video/IkmlMEHYyzI/w-d-xo.html Is a good beginner tutorial.
@@sashaw5283 thxxxx so much, is a beginner method's tutorial or a advanced method's tutorial?? I already know how to solve it by beginner method
@@djko978 Oh that's a beginner tutorial. If you want to get more into squan solving then I guess learn all EO and CP algs (which there aren't that many) and learn scallop kite/scallop scallop for Cubeshape.
th-cam.com/video/-fYJTvNSCdo/w-d-xo.html Is a good one for scallop kite cubeshape.
@@sashaw5283 thxxxxx
5:10 how does a human shake like that
i love broken edges ( on twitch)
Dude the broken edges. Why was squan hardware so bad for so long???
Every time a non cuber touches my squan and scrambles it they almost destroy it
I hate tracing incorrectly for CSP, and taking 45 years to trace for CSP
Squan looks fun to me but also torturous. Should i buy one?
How can I find an abf tutorial?
isn't an n perm one of the best perms to get
the N-N CP case is, but not a single N perm
I might sound strange, but I prefer the yellow side and not the black side for my square 1
Bros a light mode user
THE YLM CAPS IS SO REAL
Ooo when you said misscrambles I felt a weird anger
dude did shiver me timbers mode on 😂
I suffer from slow ABF disorder lol
lol me too
I nearly do square one but 85 percent of these things are relatable
What does YLM stand for?
YuXin Little Magic, it’s a cube
i cant even speedsolve this thing because im afraid i might break it 😂
Why do you like black sides?
why do square-1ers hate no black side?
50+ Things All People Hate
1. Square-1
2. Taxes
not having a black side confused me, why SHOULDNT you have yellow
Yellow's low contrast with white makes most people prefer black
jesus crist the last one is so true
I can relate to broken pieces
Hey Chris
U should have added funny music in the background. Lol
k
Finding that copyright free is too much work lol
This couldn't be more true
Top thing Sqare-1ers hate:
Square-1
no need to @ me with those bad cs fingertricks lol
Oof.
@akaL4CE
can you make a tutorial on how to make a black top square one? i want to make my volt v1 black top.
Why do people like black sides?
Cuz it’s always either next to a white piece or a black piece and yellow and white are hard to distinguish quickly
lol i like the yellow instead of black
As someone who does all WCA advent I can relate to this, also vote if you read this
👇
I read it
why do people like black sides so much? i personally like yellow cause its the colour scheme
im not a squanner but i do indeed hate even worse CS cases
Idk why but I don’t like black side. I much prefer yellow
nice exaggerated fb pause 5:00
Number 51:square one jokes
Cuber At work when one happens we just have to go back to square 1
pbl vid
Non cubers gonna try to twist the corners
pll+1= lots of algs? injustice to karnaukh
I mean only reason is not tryna leak his pbl sheet lol
Cube Master fair
So they hate everything about squan?
3:30 tfw those are literally free
What the heck are you talking about my guy?
Plat Lim I thought that they came off with no effort, but nvm.
Fri/04/23/2021 at 12:37 E2DT
Oh no!! Muscle memory!!
Am I the only one that actually likes the yellow instead of black side?
I think pops and parity parity dnfs were experienced by non square 1ers and maybe more of them hey list done somethings that you hate about cubing here
Why does it matter if you have a black side or not
Because yellow and white have little contrast, and it’s hard to differentiate in some lightings, which is why black caps exist, or maybe it’s just looks cool I guess
I use yellow
@@Clockeryt1 ohh ok
Bro do you even have a 3x3?
3:56
Last one is sooo true
woah random lin representation
Number 3 i totally relate to
I wa in morning and YOU made me q bad day bro
And The Most Impressive Thing
I DONT OWN RiGHT NOW A SQAN
I disagree with number 3
The hardware
So true
Reminds me of paideandy
so relatable
Hot potato 😭
most of these are just 3x3 things and more of something
N perm is what every cuber hate
7, 8, 9, and 10 lmao
and #18 is generally the cause of 7-10 for me lol
Personally I don’t like having a black side
match against vicenzho
Already Happened
i mean he should upload it
lol 100% agree
Number 53: Square-1
wait people like black that much?? i honestly want a square 1 where the top and bottom is blue and green
Step 1: Buy custom stickers
Step 2: Apply
Step 3: Good luck
Parity '__'
54: not having a gf
I watched the whole thing with a straight face until the last one.
When i saw tht fricken scramble i cracked up so hard