How To Change The Oil In A Kranzle Pressure Washer
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- To change the oil in your 7/122 you will need:
13mm Spanner
22mm Spanner
Somewhere to oil the oil into
Kranzle Oil - bit.ly/kranzleoil
Rags
For the latest prices and specifications visit - bit.ly/kranzle
_____________________________________________
📞01925 44 44 64
💻 www.kranzle-pre......
📧 info@aquaspray.co.uk
📸@kranzle_
🐦 @kranzlepressure
📺 Kranzle Pressure Washers
-------------------
#kranzle #aquaspray #service
Disclaimer: you accept all responsibility for any damage or injury to yourself or others if following any of my videos.
it is sad I have to put this, but if you do something wrong you could damage your machine or hurt yourself or someone else.
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 13](http://i.ytimg.com/vi/NlY2uzrALY8/mqdefault.jpg)
I’ve dropped my spanner into the oil once I’ve finished just to make sure it will prevent from rusting. Job done
I was a little afraid to do this if I read just from the instructions so this video was perfect and extremely appreciated, thank you very much mate!
Awesome job 👊
Great and informative vlog, I did mine a couple of weeks ago using the correct oil good quality Mobil, and I would say it had only done 25 hours in 3 years kind regards to you Mark from Billericay 😃👍
Just changed the oil on mine, this video really helped, thank you for the upload.
Excellent. Just ordered oil from your website, and, finally, will get round to doing this
Nice vid, very helpful…just did mine…forgot to release the top cap first so had an oil explosion when I undid the sump drain…(warning to everyone) oh well all good THX
Thank you for this!
I just received my 1322ts. It doesn't have an oil site glass like yours. It was manufactured 5-22. Did kranzle get rid of the oil site glass? Thanks
Cus-spec detailing 👍🏼
Excellent thanks 😊
No problem 👍
Brilliant video, thank you
ACC valeting & detailing 👍🏻
Great video. Thank you for showing the righty tighty aspect in close view for dummies like myself haha. I’m curious however because my 1622TS that I bought from RightLook Auto Detail Supply in Cali didn’t come with a “sight glass” on the side of it. It looks like there’s a hole for it to be placed into, but there’s only metal frame and no sight glass.
All new machines come with a dipstick
You guys in the USA got that quicker than us in the UK 🤣
Super
Excellent videos malcom.
I'm just about to change the oil on my K10 TS but it doesn't appear to have an oil sight glass, there's just a blank in the casting.
Have they stopped fitting them?
It is remarkable That I bought the Quadro 800 - not cheap - and they do not bother to tell you how much oil you will need to put in when replacing. The oil pissed out in shipping and now I have no idea how much to put back in and what to use.
Page 11 of the operating manual says that the oil must be visible in the oil chamber and between the marks on the dipstick just like a car 👍
Thanks for the vid super simple. My drain oil was green is that normal?
The original kranzle oil does have a green tint but without seeming your oil I can’t tell if it’s normal or not
@@KranzlePressureWashers you got an email I can you send a picture.
Great tutorial video! I wonder if we can use engine oil 15W40 for oil change? engine oil/gear oil are the same?
Not really. It would work in a pinch but it’s much, much better to use the kranzle gear oil. It’s pricey, but you can compare it to oil of its weight side by side in a glass and see the difference.
No ! Engine oil and gear oil are quite different.
Malcolm, I need a replace the oil in a Profi 160 TST that I bought from Aquaspray in December 2021. I'm wondering what volume of oil this model takes?
My Kränzle 10/120 HD has creamy oil and pressure build up in oil compartment, so it’s passing water from the pump side. Which seal set should I change? Thanks.
@@Ccorniit sounds like you need the water seal kit
@@KranzlePressureWashers thank you for your reply. Also is it normal that these will not turn on until pressure relieved from the trigger or turn on trigger pulled? Otherwise the motor just buzz and not spin. I can’t recall did mine ever start as it’s been like that forever. I’m not using extension cord.
Do the bolts has specified torque settings?
Morning how much oil approx. and what grade of oil please :)
Which oil to use for Kränzle HD 9/80??
What pressure should my K7 be? Did oil change and it’s short of 100 bar roughly?
A 7/122 should run about 120 bar
It maybe the lance nozzle worn
@@KranzlePressureWashers it’s only about 6 months old. Running it off short trigger gun
Is the 135 the same
Can I use 75W-90 gear oil?
I have a question.
I don't see anywhere. What type of motor does that machine have? Is brushless ?
They are induction motors, some are 4-pole
No kranzle has a brushed motor
@@KranzlePressureWashers thanks 🙏
My 1322 leaks ever so slightly at the bottom middle behind the oil plug but before the main body (near the find). Only a year old. What is causing that?
if leaking from a small hole under the motor then it will be the main motor shaft seal that needs replacing
Hi Malcolm, I changed my oil recently and used 250ml of the genuine Kranzle oil. But I'm getting quite heavy cavitation, lots of air bubbles in the oil which I never got before. It makes the oil look milky, but it's not water in the oil, just air bubbles as when it settles the oil looks normal again through the site glass. Also, the old oil had no milkyness to it, just a tad darker than the fresh stuff, nothing untoward.......Have I done something wrong?
The red filler cap was tight enough, as when I took it off yesterday I did get the normal hiss, so it should be air tight in there. But this cavitation is something that strangely my old oil never did. I wonder if the factory oil is a thicker running in type oil?
Let the oil settle and check again
@@KranzlePressureWashers When you say check again, do you mean the oil level? Once settled, the oil sits just above the pistons / springs. Or do you mean drain and check for milky residue in the container I catch the oil in? It's the first change I've done, machine is a year old / approx 50 hours running time on it..... K10 122 TS
@@23hublock1 It's okay, it is a splash lubrication system afterall, some aeration of the oil is to be expected.
First time i get kranzle and window glass side i see a lot bubbles in oil that from shipping, I run machine in same time My question is inside machine will be ok or having damage? Because a lot of bubbles oil, I running test pump short time 3-5Minute.
Sorry about english language.
Always check the oil before you start
When it starts running it can cause bubbles if you let it settle and check it again it should be fine
@@KranzlePressureWashers Thank you 🙏🙏
So watching this video I just learned that my oil is bad. It’s white-ish. Can I just change it or do I have to do more ?
Change it as soon as you can, if it turns white quickly you may need to strip the oil chamber and clean
What great oli we used for this machine??
Check the description & click the link to the recommended oil 👍
Malcolm what grade of oil needs to put in the kranzle pump or what. Oil no,,pls reply thanks
I’m always going to recommend original Kranzle pump oil, however if you can’t get it you can use a good quality engine oil like 15w40 just remember the cheaper the oil the more you will need to change it
Use a non detergent oil.
How,much oil do i need for the 1050P thank you from mel
100ml of oil in the 1050 range 👍
@@KranzlePressureWashers thanks Malcolm from mel
Is this the same 15w40 oil for diesel engine?
Yeah although there are different qualities of Oil. Rule of thumb the cheaper the oil the more you will need to change it
Help,
the plastic oil cap has broken off. the threaded part is still there. how do you get this out?
thx
Just use long Jose pliars and hold them open and turn
@@KranzlePressureWashersthank you for you quick reply but that doesn´t work. It realy stuck😱
@@larseniaqi8702 it’s only plastic so if it’s stuck you could use a screwdriver to tap the plastic threads to loosen it
@@KranzlePressureWashers, i think there wil be no other option. Thank you for the help 👍🏻👍🏻👍🏻
Done, thx again
WHERE TO PURCHASE OIL IN STATES (AMERICA) ARE A EQUAL SUBSTITUE?
Try - detail-division.com
If they don’t have any use a good quality 15w/40
@@KranzlePressureWashers THANK YOU.
@@DETAILINGDETAILING-hb7bj did you purchase a good quality 15w/40 oil for your kranzle? How did it work out?
@@SpotlessWaterGuy I contacted ATLANTIC PRESSURE WASHERS on MARYLAND. BUT HAD TO SWITCH to a synthetic oil of their recommendation, can't recall at moment but still have container in garage. So far no issues at all.
Nice, but what type off oil?
I obviously recommend the original kranzle oil that’s the one in the link in the video description
You can use a good quality 15w/40 as a next best thing if you can’t get it locally
But remember if you use a cheap oil be prepared to have to change it more regularly
@@KranzlePressureWashers Ok, thank you. No Kranzle dealer nearby here.
What’s the oil grade?
I always recommend the Kranzle pump oil because of its properties, I do understand that people who aren’t in the UK can’t find it easily then I would recommend a good quality engine oil around 15w/40 remember the cheaper the oil the more often you should change it
What oil do you use
All the links are in the description
Https://kranzle-pressure-washers.co.uk/collections/seals/products/kranzle-high-performance-gear-oil-400932
What can of oil you use ?
kranzle-pressure-washers.co.uk/products/kranzle-high-performance-gear-oil-400932?_pos=6&_sid=c74b8949e&_ss=r
kranzle pump oil is recommended
Would a decent 15w40 engine oil be ok? Mineral oil, semi synthetic, or fully synthetic?
As a Kranzle dealer I would recommend the Kranzle Oil, however if you have access to a good quality 15w40 it would do just fine doesn’t matter mineral/synthetic just remember the lower the quality of oil the more regularly you should be changing it 👍
@@KranzlePressureWashers Thanks Malcolm :)
Absolutely not, you need non-detergent oil for this.
It’s just like changing the oil on a car
Dis nikka. How much oil? Come on
250 ml in a 1152 7/122 or 10/122
100ml in the 1050 range
Washyluxurydetailing
@_j.477
@5280apc_detailing
Thanks for this!
No worries!
Super
What oil do u use
Https://kranzle-pressure-washers.co.uk/products/kranzle-high-performance-gear-oil-400932?_pos=6&_sid=57f23fa39&_ss=r
What can of oil you use ?
Ideally Kranzle official oil, if you need to you can put 15w40 in but use a good quality oil, The lower the quality of oil the more you will have to replace it 👍
kranzle-pressure-washers.co.uk/products/kranzle-high-performance-gear-oil-400932?_pos=6&_sid=04004d8bd&_ss=r
Quick question is this the same 15w40 you use for a diesel engine