Part 3 | Kranzle Leaking Oil? | How To Change The Motor Oil Seal
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- Part three:
How to change the motor oil seal
Part one - • Part 1 | Kranzle Leaki...
Part two - • Part 2 | Kranzle Leaki...
Part three - This video - • Part 3 | Kranzle Leaki...
14mm Oil Seals - bit.ly/14mmoils...
Main Motor Seal - bit.ly/motorseal
For the latest prices and specifications visit - bit.ly/kranzle
_____________________________________________
📞01925 44 44 64
💻 www.kranzle-pre......
📧 info@aquaspray.co.uk
📸@kranzle_
🐦 @kranzlepressure
📺 Kranzle Pressure Washers
-------------------
#kranzle #aquaspray #parts
Disclaimer: you accept all responsibility for any damage or injury to yourself or others if following any of my videos.
it is sad I have to put this, but if you do something wrong you could damage your machine or hurt yourself or someone else.
Thank you for these excellent videos. My two year old barely used 1322 TS has a slow oil leak that seems to be the main motor seal. Disappointing to say the least. Happy to have your videos though!
Was your oil milky
Exactly what I was looking for, thank you very much!
Glad it helps
Hi. I have Kränzle 10/122, and i have small oil leak. But i dont know what parts i have to buy? It this the aq-pump or what model?
This is a job that is best left to the professionals imo
except not every place has professionals that can service kranzle pumps
thank you very much sir
I'm happy to this video.
Thanks for this video. I've had mine for just over 2 years, only use it for washing my cars. It probably has about 20 hours of use on it and I have this leak. Really disappointing for such an expensive machine. Debating whether or not to do this fix myself or send it off somewhere. Is there a recommended place to send to in the US? Shipping is going to be a nightmare.
Yo I tried doing this but ran into the problem of my wobble plate not coming out (at around 0:40 in the video).
I'm cross commenting this here in case anyone has the same issue:
It is a bitch to do. 1. make sure the armature/shaft is fully seated into the transmission housing, then 2. take an allen key and feed it in between the transmission housing and the wobble plate. 3. Rotate the allen key so it's slotted underneath the wobble plate. You might want to do this with two allen keys on opposite sides of the wobble plate. You want to get it nice and firm since. You can rotate the wobble plate so it squeezes against the allen key at the low spot (it also wobbles on the bottom). 4. With the allen key in place and a 3/8" extension, tap/bash the armature shaft down as far as it will easily go. 5. Repeat step THREE with a larger allen key, then repeat step FOUR. 6. Keep repeating step FIVE until you've exhausted the largest allen key you can squeeze in there 7. Now you get to use two allen keys stacked up on one another UNDERNEATH the wobble plate. 8. Eventually I had to go to THREE ALLEN KEYS stacked underneath, but then I could pry the wobble plate free through one of the oil holes.
Quick note: you will need a nice way of supporting the transmission housing/armature assembly by the transmission housing. It has to be tall enough to lift the armature off the work surface from the rear face of the transmission housing. I used two 2x4's glued together perpendicularly and they worked perfectly.
Were would you buy the parts and tools from to do the seal
We can supply all the parts and official kranzle tools needed just contact us
Hi recently i changed my oil seal but again there is a white texture again after using one time,i used a little grease can this also be reason and can i use the machine without changing oil
If the Oil goes white so after it’s been changed
You may need to strip and fully clean the oil chamber
You are getting water or moisture in the oil chamber. Possibly water seals are worn
Depending on the oil used depends on if you can run it without damaging the pump, some oil properties allow water while keeping its lubricant properties
Great Sir
what is the weight of just the pump without that cradle it sits on?
the machine is about 22KG the carry frame is only light so about 21.5kg without it
I have 2 I need oil seal
hi, I am a Kranzle 790TST user, I have a problem. The problem is when I use the machine, the machine suddenly turns off, can you tell me the cause?
Difficult to diagnose of text on youtube, find me on Instagram @kranzle_ send me a dm
Malcolm long screws on the bottom???
The Long Allen screws are for the two top holes of the pump (I think that’s what you mean)
Hi Malcolm. If I send in my machine for service and it requires some seals, is the labour included in the service cost? So that I know the max price it will be is the service cost plus the seals? Cheers
No extra labour is charged Just the price of any parts used
So if it leaks and doesn't get worse, what's the risk of just keeping the oil filled? Mine too has probably 20-25 hours and leaks...
As long as good oil is in the pump and the pressure is ok there is little risk. However it’s not very environmentally friendly, and in my experience a leak over time will always get worse eventually
I'll recycle (lol)... and on the assuredness of worsening, totally with you. Thank you for the excellent video and your response. @@KranzlePressureWashers
I did this exact repair yesterday on my 1120T. My unit exhibited the exact same prom lens and what I removed the motor the seal was damaged the exactly the same. I put it all back together and it still leaks!!!!! S@$!, what could I have done wrong here? Any ideas guys???
could the housing be scored or damaged?
The Kranzler is expensive and supposed to last, but many owners face problems. I don't understand why the company is still in business.
Usually the only reason for any failure is user error, I personally have had NO genuine warranty claims in years.
If you want something to last you still have to do some maintenance
I have a machine from 1987 in the shop that still works great and parts are still available, I challenge anyone to find a machine of that age that the parts are still available and is easy to fix/service
What type of grease do you use?
I find the best stuff to use is a water proof lithium grease 👍
which oil should be used?
Https://kranzle-pressure-washers.co.uk/collections/seals/products/kranzle-high-performance-gear-oil-400932
I recommend this oil
And a 6-8 week wait for a machine?
yes the demand at the moment is very high while production is low due to varying reasons, the quicker you place a back order the quicker it will arrive
Hi. My K7 was stored on its side for around 3 months accidentally. When I found it there was a small pool of oil on the floor and after being stood upright overnight the rest of the oil came out of the bottom of the machine indicating this seal. Do I still need to replace the seal in this video even though the machine was working perfect before it went into storage? Is it possible for oil to leak from the bottom of the machine if this seal is not faulty but as a result of being on its side or is the only possible way for oil to leak from here if the seal is gone?
regardless it needs stripping as far anyway to clean it up doesn't it!
I personally before stripping the machine I would clean the machine completely of oil
Fill the oil to correct level
And then run the machine checking for any leaks
@@KranzlePressureWashers the answer I was praying for! Ill do just that and hope for the best! Do I need the Kranzle branded oil or can I use motor oil? I have 5w30 and 10w40 synthetic oils here. Thanks again, I appreciate your time
@@tompillen while I will always recommend the original Kranzle oil if you are a different grade just drain completely rather than use different mixes of oil
@@KranzlePressureWashers thank you