@bilsteinUS
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- In today's trail test we compare two similar Toyota 4Runner's head to head: One with the 5100 series shocks up front and the other with the 6112 series. We know the 6112 is beefier and should be "better", but how much of a difference do we feel and at what point is it worth it to spring for the upgrade and go with the 6112s? Tune in to find out.
#Bilstein 5100
www.shocksurpl...
@bilsteinUS 6112
www.shocksurpl...
Detailed breakdown of the differences between the @bilsteinUS 5100 and 6112:
www.shocksurpl...
Thanks for the video. Completed the installation of the 6112 (F) 5100 (R) on my wife's 2001 Toyota Sequoia. She loves the new ride, excellent product!!
Great to hear!
If you did a "blind test" with the same rig, on the same section of trail, you probably couldn't tell the difference. I think the 6112 shines when used on heavier rigs, such as the Tundra. I have owned both and that's what I have observed.
On street driving it's minimal difference but we can notice it. On trails it's a huge difference.
@@ShockSurplus can you please elaborate with regards to On road manners ? Would you say the 5100 is a tab bit road friendly vs 6112?
This was my thinking EXACTLY! 5100s seem adequate for a Tacoma with no extra load. If you add extra fuel, racks, steel bumpers, full size spare, etc, then they make more sense. Perfect setup for the heavy ass Tundra tho.
I bought the 6112s with the Bilstein springs from you guys and also bought the 5100s for the rear Of my fifth generation TRDORP. If you hear of anybody in the Oklahoma City area wanting to do a test drive send them my way. I would also like to ride with someone that has the 5100s for the front and rear. The difference in the suspension with this new set up is night and day between the stock set up. Absolutely love the 6112s in the front. I probably need to do the icon springs for the back though. Still feels a little mushy with the stock springs. Thanks to you guys at Shock surplus. Very prompt in the delivery and they were set up exactly as I requested.
Much appreciate on offering anyone local people would like to test ride your vehicle. That is really nice of you to offer that. We also have offered that for local people to get a ride along in our rigs like the SDI setup. The pleasure is all ours. If you or anyone needs any help, please contact us directly and we'll help steer you in the right direction.
Just curious what the circlip location you asked them to set up at that moment. And any extra weights associated with that setup. Thanks in advance.
Hey Jeff--I have a 2016 4Runner that I'm looking to put a lift on. Leaning towards the 5100 because it'll mostly be a daily driver with minimal offroad usage. Do you still live in the OKC area?
Springs included with the 6112s could also be the slight diff
I would go with either for the money
We can also help get 5100 assembled by running an ARB or Eibach spring as well but you end up spending quite close to the cost of a Bilstein 61112
I have 6112 & 5100 on my 3rd gen. So far I’m happy, BUT I’m not a super experienced off road driver
That is great to hear! No worries at all! Every starts from somewhere.
What height setting did you have on yours?
Got the same setup. Can’t wait to put it on.
KDSS vs non-KDSS seems like a huge deal when trying to make comparisons like this :/
The white 4runner had KDSS but it since as been removed for this current setup.
@@ShockSurplus KDSS was on the white 4runner when this video was made, right?
I got the 6112 on my 3rd gen for the front cause I wanted to use it a little heavy in the SoCal desert. I’m not big into slow rock crawling. I mainly like faster trails with whoops and stuff so I figured 6112 were the cheapest way to get close to a fox, king, icon suspension for way less cost.
I’m thinking the wider shock body will prevent wear and tear and maintain lower temps.
Obviously I’d love a rebuildable shock but I can’t justify spending 2-4 grand on a suspension setup for a near 30 year old vehicle.
Need help here please! Got a 21 limited w/ third road 4WD. X-reas system starting failing. Planing on getting 6112 for the front and 5100 for the rear. I want to keep a stock height as it’s a mall crawler/family car. Stock limited tires and rims. Can any point in the right direction?? Which springs do I need??
great video picked up 5100 from you guys
was the bumper cut on the wht 4runner? looks horrible
Great video as always!
Glad you enjoyed!
Great video. Thanks
Glad you liked it!
If I buy the 6112 from you guys today and do a video as a trd off road premium with KDSS can I be in the next video. Running 33 inch ko2 all terrain and a Thule canyon with an iron man 8” awning. Rock sliders, rear locker
email us at sales@shocksurplus.com and we'll forward you request to the media team to see if we can do that.
We'd love to make it happen
Great video. Any details on which notch was used on the 5100 and 6112, what rear springs on both and front spring on 5100?
2016 4Runner with KDSS - Bilstein 5100 #2 circlip, ARB 2885 Front Spring, Bilstein 5100, Icon 52700
2021 4Runner Non-KDSS - Bilstein 6112 #7#5, Bilstein 5100, Icon 52700
Nick out here sounding exactly like Tiger Woods in interviews 🤣
LOL
I'm leaning toward the 6112 fronts w/ 5160 rears for my 2019 SR5 Premium. I am pulling the third row seat and all accessories for it as I never use it and don't need the weight back there. I only want to level the front to the rear, so which rear spring do I go with, if any? I have heard a few times the SR5 Premium w/ 3rd row seats had heavier springs in the back over non-3rd row Runners. Would love your input. Cheers.
Oh, I am sitting on 275/70/17 and I'll be adding Spidertrax offsets to stock rims.
If you are just trying to level it, you could even stand to keep the stock spring in the rear if you are okay with keeping it a 1.5-1.75" of lift in the front. Otherwise if you want it to sit higher you will just want to make sure you look at standard rate rear coils and you do 1.5-1.75" more lift in the front. So if you were to go with a 1" rear spring like Bilstein B12 36-281817 you want 2.5-2.75" of lift in the front. For anything over 2.5" of lift it will be a good idea to upgrade the upper control arms.
List set up in comments please for both trucks shocks and springs?
2016 4Runner with KDSS - Bilstein 5100 #2 circlip, ARB 2885 Front Spring, Bilstein 5100, Icon 52700
2021 4Runner Non-KDSS - Bilstein 6112 #7#5 circlip, Bilstein 5100, Icon 52700
Please net compare 6112 and 5150 vs 5100 front and rear, so that both front and rear are different sizes, thanks!
This videos shows the 6112 and 5100 set up vs 5100 full set up. The 5160 is the same as the 5160 in terms on valving, but with an external reservoir which will help the smaller 2" body last longer on a trail without fading out.
Can 6112 be placed on the rear?
They cannot as they are just for the front. Doing a rear coilover in the back is going to require custom parts. Our white 5th gen 4unner is looking to do a coilover in the rear in the next year or so.
@@ShockSurplus thank you very much. I’m SoCal based and own a JL Jeep Rubicon. I guess I can put 6112 up front and figure out something for the rear. I have zero lift and I’m looking for on road performance. Not much more off-roading than a couple trails a year. Mostly street and freeway.
3.5" front and 2" rear will it be ok on a 5th gen 4runner with kdss?
As long as you have the the proper part to run a 3.5" lift then you're fine. In some cases people run a spacer for the KDSS to help with the angle.
@@ShockSurplus thanks for the response , is it gonna be leveled front and rear on the setup? Or gotta have 3” front to level rear?
3.5" is really too high to go on a IFS 4Runner, unless you're doing a full long travel suspension. At 3.5, your downtravel is going to be pretty much maxed out just sitting still and it's not going to function very well in action. Also, you're probably not going to be able to get it aligned correctly. Watch videos by Tinkerer's Aventures to learn more about IFS Toyota setups.
Does the Bilstein 5100 instruction tell you which strut go on which side (driver vs passenger) and if the lift notch should be the same on both struts?
The 5100s do not get an offset for circlip settings and are not side specific. They use the stock coils on the front struts so lean is far less of a concern. 6112s by comparison do get offset two circlip settings higher on the driver side for 4Runners without KDSS.
@@ShockSurplus appreciate it! My 5100 order from you is arriving soon and I want to make sure if install it correctly. My final question is which stock spring should go on which side (assuming I removed them and then mixed up and forgot). One spring has one more coil/spiral than the other.
The spring with the extra coil goes on the driverside. The long spring fixes the lean
Was that setting on the none KDSS fronts to compensate for the drivers side lean .?
Was it level on those settings?
Yup that is exactly it. Pretty much any strut that includes a spring needs to have the preload set a little higher on the driver side to correct for lean on Non KDSS Toyotas. This 5th gen ended up bein almost perfectly level on the driver and passenger sides when we measured. I do not have the exact numbers but if I remember correctly it was within a few millimeters, and we know our shop floor where we measured it is not perfectly flat, so in the real world it was probably absolutely dead on.
@@ShockSurplus awesome thanks for the response I think I’ll be going with this kit then .!
How much lift does the 4Runner with the 6112 have in the front/rear?
Both were doing 2.5" at the time of the video in the front and 2" in the rear.
Cant really compare control with one vehicle having beefier tires.. need to take that into consideration, some of it is the shocks and the rest could just be the tire difference.
Both were on the same size tires with nearly identical weights, but when we are talking about control we are talking about their tendency towards resisting unwanted body motions and managing large suspension events.
@ShockSurplus OK.. the tires didnt look same at all but I'll take your word for it. I know what you meant , just looked like steerring corrections on the vehicle with the 5100 and looked like smaller tires on video. But all good. Good footage .
What size tires are they running?
285/70R17
can you add the 6112 with kdss?
The share the same parts as non-KDSS and KDSS but will provide different lift specs. The part number you want is 47-310025
This review is utterly useless
sorry!