DAAAAAMN! I would had loved to be there! mkII Mr2's, toreno, old school corollas awesome cars right there! I saw an 86 the other day on route 17 it was awesome!
the hellaflush look will never die. its been around since the 70's. its common for driftcars and vip cars to have that look.i reckon it looks better when a cars stance is like that
I'm probably not the first to reply, however, the offset of the wheel is how the wheel will sit with relation of the suspension and body components. either very far in (high offset) or very far out (low offset). Negative camber is when there is an angle in relation to the vertical axis of the vehicle when viewed from the front or rear. Slammed is slang for un-functionally low.
@DivinityOfDoom if you knew anything about "tuning" you would know that camber kits are necessary to equalize the natural negative camber caused when you lower a car any significant degree, they aren't just used to fit wheels that are too wide for the arches. (I am not a fan of hellaflush/stance movement and I am not trying to defend it).
Those bbs wheels are a completely one off set. Chome dipped re-barrelled with gold hardware. Genuine 3piece bbs rs wheel. Check memory fab or icb motorsports. They sell rare wheels. Find 5-ONE on FB they do anything you want to customize your wheel
@JDMBRENTLINGER i would imagine its not so much the drop that puts all the stress on your wheel bearings. id imagine it would be if your "stanced" out thatll put major stress on components such as wheel bearings/end links/ ball joints etc.
I was enjoying it and wondering hey me and my buddies have cars that fit in with those until i saw the calssics............ MY JAW DROPPED lol im jealous
The Pharcyde - Drop i love dis song DUD.... I Remeber the 90´s that was the best time im Rap game..... Oldschool Rap is my live but this Car´s and NICE Girls in dis spot i love tooo DUDE The rims and the fucking low car´s I LOVE DIS
@uhrrtax ya but if what amount of camber does this apply to? probly 2" camber, I think you only go through a set in 8 months-a year if u have 0.5'' and six months if u have 1"
I love deep dish rims, I like them because I can put wider tires on my RWD car. These guys put smaller tires on "wider" rims. Looks clean though I was into JDM but got my V8 Camaro and 17x11 rims with 315's Nitto's on the back. I would like a SC400 with some power but they dont sell many mods for that motor. I talked about nothing lol
@enemay dropped a little can help with drag and efficiency but thats about it, but THIS low is only for looks on the street basically. The track is a different story.
does anyone know how to make the wheels turn in like that on the red hatch in the beggining? that shit looks soo sick i want to do it to my 95 si hatch :) salute
@mugen91integra ok? but hes not the only one with that look on their honda... ive seen alot of hatches with these wheels but havent seen an EK coupe with these whats why i wanna do it.
@DivinityOfDoom It's just style. A lot of people like aggressive wheels and those wheels look a lot better with the lips flush to the arches than they do sticking out with neutral camber. Different strokes for different folks, I'm not a fan of over the top fitment either. The whole style ironically came from race cars.
Has anybody heard of JNC Wheels? I want to get a new set of wheels from them but I haven't been able to find any reviews or videos of them. Help me out?
Does anyone know where i can buy those BBS RS rims? The exact kind, chrome with gold center, and gold bolts? Anyone please help and than you in advance.
you realize those are 2 thousand dollar wheels? and it's probably brushed aluminum and actual gold dipped lugs and bolts. So after all that you're looking at probably 3 grand to do it all. You can't buy them like that
Look up BBS RS. You'll have to get the centerpiece and the bolts coated / dipped though + you gotta get a custom / broader rim base to get an offsite like this. but yeah, they're goddamn expensive.
These cars will never get old. There gonna be classics
the pharcyde - drop is the song... what a song.
best choice of song i heard in a long time.
great camera work. great cars,looks like a great time
dude Nisei was soo awesome man they better bring it back!
ive seen that red eg like a million billion times but it never gets old just 2 dammm perfect
DAAAAAMN! I would had loved to be there! mkII Mr2's, toreno, old school corollas awesome cars right there! I saw an 86 the other day on route 17 it was awesome!
the hellaflush look will never die. its been around since the 70's. its common for driftcars and vip cars to have that look.i reckon it looks better when a cars stance is like that
sick footage and film, the edit is also great. keep going.
that red eg and the white ek are so cool lookin! so clean
the old school Toyotas and Datsuns are my favorite. JDM classics
The Black Lexus is Awsome! work of art.
I'm probably not the first to reply, however, the offset of the wheel is how the wheel will sit with relation of the suspension and body components. either very far in (high offset) or very far out (low offset). Negative camber is when there is an angle in relation to the vertical axis of the vehicle when viewed from the front or rear. Slammed is slang for un-functionally low.
One of my favorite Pharcyde songs
@xme71 I believe its a Infiniti Q45. In Japan its called a Nisan Cima.
@xVxRayJohnathaNxVx Black car is a MKIII Supra (1986.5 - 1992) and the silver car is a Toyota MR2
Old skool roots 4 life!
@ChibiMaou not really the contact patch of the tire but the side wall.
Nice choice on the pharcyde
@DivinityOfDoom if you knew anything about "tuning" you would know that camber kits are necessary to equalize the natural negative camber caused when you lower a car any significant degree, they aren't just used to fit wheels that are too wide for the arches. (I am not a fan of hellaflush/stance movement and I am not trying to defend it).
Those bbs wheels are a completely one off set. Chome dipped re-barrelled with gold hardware. Genuine 3piece bbs rs wheel. Check memory fab or icb motorsports. They sell rare wheels. Find 5-ONE on FB they do anything you want to customize your wheel
@Sk8a1016
It's a e7 corolla panelvan with quad headlight front end. Might be a ke70 i think.
@smashAE86 tha song is called "Drop" by The Pharcyde
@crxDseries bbs rs rims with some huge as lip, in hondatunning like a year ago it said that spanky had them customized
most people do it for aesthetics but does give you car a wider track improving grip.
offset is the measure from the middle of your rim and where your bolts meet the wheel
ZOMG sick ass cars in this video!
dam,had to watch 3 times in a row.
@dpstarcom right. ive known about camber since 01 and i was like 10 i seen one acura with it and didnt see another car with some camber till this year
i luv dat look!!! blazin vid.. my question is, 2 get dat alignment, (obviously other dan da tires itself) what else must b modified??
GREAT VID. Please what camera did you shoot with?
lovin' this style! the Hondas are lookin' good, 0:13 is damn sweet! ooo truenos too :O
@BOBM567 they are called itb's independent throttle bodies
The SC400 is a 4L V8 & SC 300 is the inline 6. Look it up
@JDMBRENTLINGER i would imagine its not so much the drop that puts all the stress on your wheel bearings. id imagine it would be if your "stanced" out thatll put major stress on components such as wheel bearings/end links/ ball joints etc.
I was enjoying it and wondering hey me and my buddies have cars that fit in with those until i saw the calssics............ MY JAW DROPPED lol im jealous
1:33 that supra has me drooling!!
i just got to love the grey mr2...
ya i know srry, btw do you know anything about those new camber tires that are supposedly coming out?
@lrosario20 You need adjustable arms and most guys run air bags to prevent any damage from occuring while driving on the road.
The Pharcyde - Drop i love dis song DUD....
I Remeber the 90´s that was the best time im Rap game.....
Oldschool Rap is my live but this Car´s and NICE Girls in dis spot i love tooo DUDE
The rims and the fucking low car´s I LOVE DIS
@uhrrtax ya but if what amount of camber does this apply to? probly 2" camber, I think you only go through a set in 8 months-a year if u have 0.5'' and six months if u have 1"
I love deep dish rims, I like them because I can put wider tires on my RWD car. These guys put smaller tires on "wider" rims. Looks clean though I was into JDM but got my V8 Camaro and 17x11 rims with 315's Nitto's on the back. I would like a SC400 with some power but they dont sell many mods for that motor. I talked about nothing lol
it can get sideways. the drift king did it on hot version international. I had one as a project car, it was too slow, so it got a 2jz lol.
2:00 absolutely beautiful RX4
love those rims.. whats size are them??
thanks!
@jaredmarkleady yep tires will go to wires on the inside from brand new in 2-3 month 2-3k miles (obviosly if you do lots ot city driving even faster)
saw the eg in the beginning yesterday!!!
cars are sick. Whats the song name?
@lukeshytalker02 This is very true. 1.0 to 2.0 degrees negative camber will help cornering a lot anything over that is rather excessive.
who in their right mind would not ,like this video? oh those ten people
@BOBM567 the intake? Just not running air filters thats all
@mugen91integra thats a nice ridde... u think it will look as sick on an EK coupe?
i love that accord at :28
im so glad i own an S14, RWD ALL DAY!!!
nice video man
@mortadablo Also, yes I drive a "Honda".... I drive a 06 Rsx type s, few things done to it. Nothing major. Lowered and a few performance mods.
@smashAE86 haha wow got us youtube, nice fail on our part i guess. A sick song none the less ha:D
the classic z and the rotary's were the best there.
someone people going over board wit it!
nice song
well done, well done.
1:58 was featured in Import Tuner
@enemay dropped a little can help with drag and efficiency but thats about it, but THIS low is only for looks on the street basically. The track is a different story.
@whyiseverynametaken3 FYI its not a trend ,its been around since the 80s touge racers did it all the time and alot still do.Old school roots 4 life!
@smashAE86 yeah were good xD but i never had a problem in the first place just messin around a bit right.
I paused at 0:19, pressed print screen, opened paint and saved myself a new background for my pc!
does anyone know how to make the wheels turn in like that on the red hatch in the beggining? that shit looks soo sick i want to do it to my 95 si hatch :) salute
when is the next meet?
@JDMBRENTLINGER Can you not get uprated bearings? They cost a lot, but they're worth it.
tight video! sick cars!
its Daijiro Yoshihara the drifter from gt channal at 2:53
BBS RS'. Those are widened. So they have a wider lip.
@ChibiMaou yeah i know. was just adding info. Wasn't trying to 1 up you. or say you were wrong
that song is sick! that black nissan president is straight up scary lookin! ill video
@mugen91integra ok? but hes not the only one with that look on their honda... ive seen alot of hatches with these wheels but havent seen an EK coupe with these whats why i wanna do it.
damn...how did they get their engine that clean. Anybody know how to tuck the wires?
Anybody have any idea what car is at :24? with the gold rims? looks clean. thanks
@tonyiza1 yeah thats arnels eg over there at Dippedparts, they website is retty cool too.
@kylebikesfit negative camber aids cornering , but its now a 'scene' thing, and cars are now sporting more camber than is practical to be fair
@DivinityOfDoom It's just style. A lot of people like aggressive wheels and those wheels look a lot better with the lips flush to the arches than they do sticking out with neutral camber. Different strokes for different folks, I'm not a fan of over the top fitment either. The whole style ironically came from race cars.
damn nice song - name please :))
bbs rs 3 piece hard to find and expensive try the rm's but there are companies that make replicas
@kylebikesfit Sorry dude, but what do you mean by slanted?
Good Stuff
@saltwateraquaruim btw do u know where i could find them????
2:40 looks exactly like my car!
is the guy @ 2:53 Dai Yoshihara?
I need help finding out the right offset that I want. What would be the offset on the red car at 1:24, that looks like the offset that I want.
So If you want Rims with lip you have to get zero offset?
usually a muscle guy but that toyota around 1:42 is sick
can anyone tell me the pro's and cons of stretching tyres ?? im thinking of getting some done for my integra but just wana know if its ok.
Has anybody heard of JNC Wheels? I want to get a new set of wheels from them but I haven't been able to find any reviews or videos of them. Help me out?
hjibuloibgiol987 never heard of em
+hjibuloibgiol987 Bro it's nothing but remakes and reps please don't buy those haha
alan santiago They're so cheap though and it looks pretty sturdy. Hard choice
@driftnismo18 ive never gotten smog tested it just depends on your vehicles year
little tokyo LA??? i was their....
lovin the supras at 1:34
whats the name of those bbs' on that red eg at around 0:16?
Does anyone know where i can buy those BBS RS rims? The exact kind, chrome with gold center, and gold bolts? Anyone please help and than you in advance.
you realize those are 2 thousand dollar wheels? and it's probably brushed aluminum and actual gold dipped lugs and bolts. So after all that you're looking at probably 3 grand to do it all. You can't buy them like that
Look up BBS RS. You'll have to get the centerpiece and the bolts coated / dipped though + you gotta get a custom / broader rim base to get an offsite like this. but yeah, they're goddamn expensive.
2k wheels? those wheels are 2k a piece by the way. regular ones without gold dipped center and gold harwear are 1250 a piece.
wats tha name of tha song it b bad ass to crus to lol
is this positive of negative offset. thanks
negative
david linkinhoker this is positive offset, but i think you wanted to ask about camber, the camber is negative.
david linkinhoker you cant have negative wheel offset
carerragted Yes you can..
Nick Ramirez actually you can you are right, i was thinking of something else.
What are those holes on the motor at 1:53