The panel to locate the cruise control button in the correct place isn’t too expensive from Renault. This will need coded on the clocks and ECM. Best way is to use DDT4ALL and OBDlink sx cable.
Just to follow up on my last post, I was on a good road and just started pressing buttons and the cruise control works without any programming, still no light on the dash for cc but at least it works, also I mounted the switch to the opposite side so a word of caution to anyone doing the same thing the switch plug has 5 wires but 2 of them are the same colour 'white with black stripe'. I have a replacement binnacle ordered to change from mph to kmh, it's from a '17 plate so hopefully it will have a cc light
Good video. Trying to add cc to my vauxhall movano, got wheel and switch and same as your van all the wires and pedel switches are there but tried to get it coded and guy says cc is not on the module, did you have to add any fuses or relays?
Hi , good video , thanks. Need a bit of help though, I have swapped steering wheel and fitted the cruise switch , but I can't find anyone who can do the software update ? Did you get it to work ? Any suggestions for someone who can do it ? Thanks
If this is the same as my Vauxhall Vivaro, the cruise will work you just wont see anything on the dash. Which us exactly the same as using a third party cruise control. Its easy to live without the dash information.
Thanks Mark. Not enough current flowing with Leds. Ecu thinks a bulb has blown. Resistor acts as a controlled shortcircuit to allow more current to pass through the lamp circuit then?
![EP22 - Cruise Control and Speed Limiter [ DIY VAN BUILD ]](/img/n.gif)
Great easy to follow no nonsense video. I've just acquired a Movano to convert without cruise control. So I will now be sorting that out. Thank you. 👍
Thanks for watching
Hi did you used renolink to code the Cruise control in thanks
The panel to locate the cruise control button in the correct place isn’t too expensive from Renault. This will need coded on the clocks and ECM. Best way is to use DDT4ALL and OBDlink sx cable.
I went for mounting it on the right because I didn't want any blanks on my dash lol
Brill. Next mod for my master
Thanks for watching
Just to follow up on my last post, I was on a good road and just started pressing buttons and the cruise control works without any programming, still no light on the dash for cc but at least it works, also I mounted the switch to the opposite side so a word of caution to anyone doing the same thing the switch plug has 5 wires but 2 of them are the same colour 'white with black stripe'. I have a replacement binnacle ordered to change from mph to kmh, it's from a '17 plate so hopefully it will have a cc light
Thanks for the comment
Thanks for the video as this is exactly what I need to get. I can only find £300 steering wheels on eBay. Any ideas? Thanks
Have a look for the vauxhall and nissan variants. Should give you a few more options
Good video. Trying to add cc to my vauxhall movano, got wheel and switch and same as your van all the wires and pedel switches are there but tried to get it coded and guy says cc is not on the module, did you have to add any fuses or relays?
No, not added any fuses or anything to mine
Hi , good video , thanks. Need a bit of help though, I have swapped steering wheel and fitted the cruise switch , but I can't find anyone who can do the software update ? Did you get it to work ? Any suggestions for someone who can do it ?
Thanks
Where are you located?
@@Markscampers Goole east Yorkshire
great simple video. Did you get the cruise working? plus, was the reprogramming etc easy?
I had to divert my attention to getting the van usable so left programming the cruise control but will get onto it soon and update you.
If this is the same as my Vauxhall Vivaro, the cruise will work you just wont see anything on the dash. Which us exactly the same as using a third party cruise control. Its easy to live without the dash information.
Thanks for watching
Any tips on flashers going too fast after swapping over to led's Mark?
You don't have enough resistance. You need to either put a resistor in line or buy the led bulbs with them built in
Thanks Mark.
Not enough current flowing with Leds. Ecu thinks a bulb has blown. Resistor acts as a controlled shortcircuit to allow more current to pass through the lamp circuit then?
Hi Mark great video where and how can we get it coded once we have done these steps pal
You need DDT4ALL and OBDlink SX cable. Needs to be activated in the clocks and ECM. There is tutorials on here showing it being done.
I had to divert my attention to getting the van usable so left programming the cruise control but will get onto it soon and update you.
hi did you manage to get cruise working and did you need to do anything else regards
I had to divert my attention to getting the van usable so left programming the cruise control but will get onto it soon and update you.
Hello did you get it all working
I had to divert my attention to getting the van usable so left programming the cruise control but will get onto it soon and update you.
Did you get it working?
I had to divert my attention to getting the van usable so left programming the cruise control but will get onto it soon and update you.