Installing a sloped ceiling wardrobe in 2 minutes - Time lapse tutorial video in HD
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- With a day available to install this wardrobe, we started at 730 and completed by 330.
We had previously made this in our workshop a few days prior.
The interior is all made from mdf sander to a fine p240 finish, with the option of the client painting once installed.
The exterior was made from Birch ply and oiled in a raw polyx oil from OSMO brand.
The interior was a mixture of adjustable shelving, hanging and drawers.
The doors were all soft close and finger pull handles and mirror were added last.
I created this video with the TH-cam Video Editor ( / editor )
============SUPPORT============
If you like my content & would like to support the channel monetarily you could buy me a coffee:
www.buymeacoff...
Or directly via paypal:
PayPal.me/TLcraftsman
==========SOCIAL MEDIA==========
SUBSCRIBE HERE: / @thelondoncraftsmanwor...
FACEBOOK: / thelondoncraftsman
INSTAGRAM: / the_london_craftsman
TH-cam: / @thelondoncraftsmanwor...
WEBSITE: www.thelondoncraftsman.co.uk
=========LINKS TO MY GEAR========
==========MY FILMING GEAR========
amzn.to/2sqhHAS - GOPRO 8 BLACK
amzn.to/2RQh26p - SAMSUNG 128 GB MICRO SD CARD
amzn.to/2LYOqUN - APPLE MACBOOK PRO
amzn.to/2LZ9xpR - GO PRO 8 HEAD STRAP
amzn.to/2EgSs6G - FILMING TRIPOD
amzn.to/2PnDXUP - GOPRO TRIPOD AND HOLDER
amzn.to/2rNGIG5 - ULANZI SMALL LED CAMERA LIGHT
=====GEAR IN THIS & OTHER VIDEOS====
SPRAY ROOM TOOLS AND MATERIALS
amzn.to/2O7HDJp - GRACO 695 ULTRAMAX 2 AIRLESS SPRAYER
amzn.to/2LX0Ufw - GRACO 390 PC AIRLESS SPRAYER
amzn.to/34tVFuo - GRACO RAC X GUARD
amzn.to/2PRrrvO - GRACO 110 FINE FINISH LOW PRESSURE TIP
amzn.to/38CPQ0J - GRACO 210 FINE FINISH LOW PRESSURE TIP
amzn.to/2PIMQHC - GRACO 310 FINE FINISH LOW PRESSURE TIP
amzn.to/2spuWSd - GRACO 410 FINE FINISH LOW PRESSURE TIP
amzn.to/36FsKoi - GRACO 510 FINE FINISH LOW PRESSURE TIP
amzn.to/35oNj8v - SPRAY BOOTH TURNTABLE
amzn.to/36819M1 - TACK RAGS
amzn.to/30ADvq9 - SIP SPACE HEATER
amzn.to/2TyIlTz - SPRAY FILTERS ON A ROLL
amzn.to/2uTXapl - TWIN SLOT SHELVING UPRIGHTS
amzn.to/38l76H2 - TWIN SLOT SHELVING BRACKETS 10 PACK (370MM)
amzn.to/2tjUK37 - PIPE INSULATION (TO PROTECT SHELVING BRACKETS)
amzn.to/2TCfBJK - 400MM ADJ SPEED EXTRACTOR FANS
WORK SHOP TOOLS & MATERIALS
amzn.to/2LVq51Y - MAKITA ROUTER / TRIMMER / PALM - RT0700CX4 ( MUST HAVE!!! )
amzn.to/3cO8C7D - 1/4" FLUTE CUTTER
amzn.to/3cTCYW6 - 1.6MM RADIUS - MICRO ROUND CUTTER FOR 1/4" ROUTER TRIMMER ( MUST HAVE!!! )
amzn.to/2YOuiK0 - MAKITA BRAD NAILER
amzn.to/2Eo6SSg - PVA GLUE
amzn.to/34pvYem - MITRE FAST
amzn.to/2POJR09 - 35MM HINGE CUTTER
amzn.to/2udA4JU - SIP 10" TABLE SAW
amzn.to/3aq2pgI - 250mm TREND 48T BLADE
amzn.to/2sDwkkL - 3M RE-USABLE DUST MASK
amzn.to/2NEWzyk - KETER FOLDING WORKBENCH (THIS IS A MUST BUY)
amzn.to/30AlVD2 - JOINTING COMPOUND FILLER
amzn.to/2TIkUqK - MAKITA ORBITAL SANDER
amzn.to/2FZe1JI - ORBITAL SANDER SANDING DISCS ASSORTED
amzn.to/2sJ6YBU - 500MM GTV SIDE MOUNTED DRAWER RUNNERS
amzn.to/37fet2y - MECHANICAL PENCILS
amzn.to/36cfo2y - 3MM WOOD AND METAL DRILL BITS
amzn.to/37gjiIL - MASKING TAPE (SKOTCH 25MM)
amzn.to/2RF1wZ4 - STANLEY TAPE MEASURE 8M
amzn.to/30DdW8a - WOOD BRADAWL ( SHARP POINT FOR MARKING HOLES )
amzn.to/37qwNpi - MAKITA COMBI & IMPACT DRILL SET 18V
amzn.to/36h7W66 - STANLEY SCREW DRIVER SET ( STANLEY FATMAX )
amzn.to/2ugisxk - COMBINATION SQUARE 400MM ( BAHCO )
amzn.to/30HwDrg - VINYL / RUBBER GLOVES
amzn.to/30Loxho - P600 SANDPAPER WET AND DRY
love the music in this video cracks me up
Great video guys, thank you 🙏🙏
Thank you!
I need speedy workers like u!!!!
Top job lads fitted perfectly , wish my jobs went as well as that .
Gr8 video. Now, how do you do all that??
This definitely took 2 minutes
what's the trick with measuring for the cab tops? do you use Pythagoras?! cheers
I usually do a square cut at the joint which leaves only one angled cut. It works well for me :-)
Cheers Ryan
Like the music.
Do you know of a website where I can order slanted cabinets for a closet?
i would do this but i only have sloped ceilings :]
On your angled sides how do you cut the top shelf to make it fit on the angle?
Its all about cutting it at the correct angle
What hinges are you using here? cabinet or inset?
It was such a long time ago but I'm sure they are the standard full overlay hinges not inset 👍
@@thelondoncraftsmanworkshop thanks for the speedy response.
Do you use any software before actually building the wardrobe?
Only if the project has angles or a complicated junction. But other than that, no 👍
Great video.where u buy the gloss materiel from?
Hi Ryan, question about the angled door. How do you avoid the top right hand side (the acute angle) from hitting the surrounding profile when you open it? I've recently done an angled door job and had issues with this happening and can't think how you got round it. Cheers!
Hi!
What I do is put a bevel on the back of the door right on the tip.
So using a plane, make a long bevel around 40 ish mm long starting from the front tip of the door.
It's hard to explain without drawing it or showing a picture.
As long as you don't touch the front tip you won't notice the bevel.
This will remove the rear part of the tip of the door that is likely touching your trim 👍
Ahh that's massively helpful, thank you. I did something similar so feeling reassured! Thought I was being daft. Would be great to see a video of how you do this if you get time. Thanks very much.
Hey guys. What hinges are you using on the angled door(rake). Zero protrusion and cranked backs? Cheers lads
I beleive im using 110 deg overlay concealed hinges. The job was a while ago.
Ryan
How do you guys join your MDF panels? Pocket holes?
Hi, we use biscuits mainly.
Thanks Ryan
carpenter asking about the maths for the cab tops? I get how you get the angles, but not the lengths!?@@thelondoncraftsmanworkshop
Hi that came out great. Did you order this closet system from some where?
Hi we built it 👍
Very Nice job, great level of details !
I have a question very technique ! (sorry bad english im from BELGIUM)
how do you make the center door do not touch the top bar when you open it?
With classic hinges, the door is shifted by opening it and it touches at the top., but your's seems not touching ! how ? ? :)
Thank ya lot and keep going
Antilope Color it opens the other way :)
How much groove you give between two sections
Hi im not sure what you mean
What kind of material is this? MDF?
Birch ply
Hi what kind of finish have that wardrobe ?
How much would this cost roughly? Looking for something similar!
Hi there, if you send me an email via our contacts page www.thelondoncraftsman.co.uk I can send over costs.
Thank you
@@thelondoncraftsmanworkshop perfect thanks!
I’m after one of these how do I get a quote
Hello, you can contact us via our website which is ... thelondoncraftsman.co.uk
Thank you
Hey how can i get in contact, I’ve been looking for this for a long time now.
Hi contact The London Craftsman online.
Thanks Ryan
May i know thedimensions of the cabinets
Hi I would, but all the paperwork has been filed away now as this job was 3-4 years ago
The London Craftsman estimates would be fine for me pls
How is this a tutorial?
Far from a tutorial
Plywood for doors? Not a good idea as it warps the day after and things look like crap...
You obviously don't know much
Or you like client callbacks...
It's birch ply which is very stable
Actually it’s birch plywood. I’m a carpenter and used on some projects. Nice results
"tutorial"
"Timelapse"
Rocket speed demonstration. Not shown for fair looking.?
What is the use of uploading for you tube viewers?.
+Natarajan Sugumar
Ok I'll upload the full 8 hour video then 🤣
You may edit the demonstration to run10/15
Minutes. Be cool.
+Natarajan Sugumar
Ok thanks
The London Craftsman some people jus can't b pleased , they r seeing how to do this for free!!! I paid £5000 to learn at college while struggling to get by working part time. Most of us appreciate ur vids.
To be fair I think N has something positive to contribute, but didn’t say it very diplomatically. I would really like to see more on how you make and then fit the drawers, for example. I know there are other shorts on mdf drawer making, but I like your style of production and think you would make a good job of it - if you are up for it? Either way, thanks for the effort, nice work and I’m looking forward to seeing more.