randomly saw your vdos wow and when i checking your channel all videos you explained about things are very awoesome keep Going sir.....😍 your explanation is very neat and understandable Thank you...
ASME Y14.5 is a standard published by the American Society of Mechanical Engineers to establish rules, symbols, definitions, requirements, defaults, and recommended practices for stating and interpreting Geometric Dimensions and Tolerances. ASME/ANSI issued the first version of this Y-series standard in 1973.
@@zeroto1009 no bro doubt for this I seen the drawing in my company Diameter (24-B) AND (17.5-B) I DON'T KNOW ABOUT THAT THEY told( B )TOLERANCE That mean 0.25plus or minus Can u explain that ???
Do you have any information for B in the drawing anywhere if it is a tolerance there must be represented on the drawing. And if i see the drawing only i can advise further.
Feel free to ask your doubts/clarification/ questions here.
Voice is too low.
randomly saw your vdos wow and when i checking your channel all videos you explained about things are very awoesome keep Going sir.....😍 your explanation is very neat and understandable Thank you...
Thank you so much 😀
Please make the video of (1/10 x tolerance)explain about the formula
Tol stack up analysis video podunga
Will do soon
You need to teach lot of content
Keep rocking
Thanks for your support, you will get more content subsequently.
Super sir very good information...
Thank you
Tolerance stack up , na ena edhuku use panurom nu oru video podunga bro
Super sir .you explained very neat and understandable
Thanks and welcome
hi sir 32 vdos u have post for GD&T and it enough to place in a company as a fresher ?
Super 💗
ASME mean American society of Mechanical engineering ok, what is Y14.5?
ASME Y14.5 is a standard published by the American Society of Mechanical Engineers to establish rules, symbols, definitions, requirements, defaults, and recommended practices for stating and interpreting Geometric Dimensions and Tolerances. ASME/ANSI issued the first version of this Y-series standard in 1973.
Super sir
Thanks
👏🏻❤️🔥
Thanks
Bro dia 24-B mean ??
Mention the time of this video for referring this doubt
@@zeroto1009 no bro doubt for this
I seen the drawing in my company
Diameter (24-B)
AND (17.5-B)
I DON'T KNOW ABOUT THAT
THEY told( B )TOLERANCE
That mean 0.25plus or minus
Can u explain that ???
Do you have any information for B in the drawing anywhere if it is a tolerance there must be represented on the drawing. And if i see the drawing only i can advise further.
@@zeroto1009 how to send that drawing!!
@@zeroto1009 any contact information like whatapp or other social media platform !!
Neenga kamiya na video dha upload pandringa ana worth to watch
Thanks bro, 🙏
@@zeroto1009 since i watching your videos too long today is my interview i hope i Crack video
@@thatswhyimsaying4647 all the best, never stop learning
@@zeroto1009 Interview clear panitan bro thanks
mail id please
Super sir
thank you