Don't know whether you realise it ,but the quality of the installation, yout fit and finish, is improving with every conversion. Very impressive. Puts Mr Hymer to shame. One minor criticiscm - I would Tesa wrap your wiring "looms" to prevent any chafing which could occur long term. It is a moving vehicle and even a small vibration of an unfastened wire will produce chafe over time.
Thank you for nice comments, I have recently bought a new camera which is 4k so that might be why things looks better 😂 As for the wiring it is clipped with panel clips on flat panels and any where that the wiring travels through it either has split conduct to protect it or sicoflex to stop it chaffing. Many thanks for watching
@@dantheman321 It was just the tangle under the Sargent I was referring to - where the trim panel was used to push the wires back, I had seen you grommet wiring through panels on earlier videos. Don't want to be picky - just passing on my bit of experience :-)
Hi Dan another great video did you do a finished van tour of this one? I’m struggling with the overhead locker in the kitchen area, I want to see how you finished the backside of the locker as the back I on an angle and I’m using the mm furniture board
Hi, great video's...just wondered, after you line the whole ceiling and after you build the shower cubicle do you cut away the ceiling lining in the shower cubicle and stick shower/formica panel to the ceiling or leave the lining in place? Cheers
Hi Dan, an excellent set of videos as usual. I see you use the far superior fibreglass shower tray, far better than flimsy plastic. Can you let me know where you get your shower trays as I would really like to replace mine.
They are only made for our motorhomes and campervans. We had a mold made specifically for them so if you would like to purchase one please contact the office. nuventureunit2@aol.com 01942 494090 Many thanks for watching
I connected that to the drain before I put the shower tray down and left the excess under the van so could be cut to size to attach to the waste tank. Many thanks for watching
![[UNCUT] ขยี้ "อลิส" ปม "คลิปลับแตงโม" เปิดชื่อคนพยายามแฮก "มือถือแตงโม" I คนดังนั่งเคลียร์I 10ก.พ.68](http://i.ytimg.com/vi/_RPLEIi5Sz8/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 96 | คู่เอก "คมอาวุธ vs พันฤทธิ์"](http://i.ytimg.com/vi/ofERaO0gOsE/mqdefault.jpg)
For any enquiries please contact me at
Email : Dtm321tube@gmail.com
Instagram : #dan.theman321
Many thanks for watching
Iv had motohomes most my life and this video is 100% quality work well worth the money great stuff
Don't know whether you realise it ,but the quality of the installation, yout fit and finish, is improving with every conversion. Very impressive. Puts Mr Hymer to shame.
One minor criticiscm - I would Tesa wrap your wiring "looms" to prevent any chafing which could occur long term. It is a moving vehicle and even a small vibration of an unfastened wire will produce chafe over time.
Thank you for nice comments, I have recently bought a new camera which is 4k so that might be why things looks better 😂
As for the wiring it is clipped with panel clips on flat panels and any where that the wiring travels through it either has split conduct to protect it or sicoflex to stop it chaffing.
Many thanks for watching
@@dantheman321 It was just the tangle under the Sargent I was referring to - where the trim panel was used to push the wires back, I had seen you grommet wiring through panels on earlier videos. Don't want to be picky - just passing on my bit of experience :-)
Really nice workmanship. As always a great video.
Thank you very much
A pleasure as always to watch Dan.
Thank you very much and many thanks for watching
Different layout than most vans I like it.
Hi Dan another great video did you do a finished van tour of this one? I’m struggling with the overhead locker in the kitchen area, I want to see how you finished the backside of the locker as the back I on an angle and I’m using the mm furniture board
Yeah I did do a finished video of this one at the end of series 10.
Many thanks for watching
@@dantheman321 thanks I found it but unfortunately couldn’t quite see the angle of the kitchen overhead locker back plate 🙈
Hi great video thanks for sharing this update 👍👍👍🇬🇧🇬🇧🇬🇧
Thank you for watching
Hi Dan very interesting videos well done, we’re do you get your furniture boarding especially the corner profile at the bottom of the top lockers .
A place called laminated products, but they sell in huge quantities, they don't sell one or two lengths unfortunately.
Many thanks for watching
dantheman 321 Cheers Dan👍
I watch every video and I'm always impressed with what you do, I'm sure theres some witchcraft involved somewhere though,
Haha not quite, thanks for watching John
Hi, great video's...just wondered, after you line the whole ceiling and after you build the shower cubicle do you cut away the ceiling lining in the shower cubicle and stick shower/formica panel to the ceiling or leave the lining in place?
Cheers
No the lining is removed so that the shower roof panel sticks properly.
Many thanks for watching
@@dantheman321 Thinned down PVA to seal the ply?
@@houseinavan194 no I used formica same as the walls 👍
Hi Dan, an excellent set of videos as usual. I see you use the far superior fibreglass shower tray, far better than flimsy plastic. Can you let me know where you get your shower trays as I would really like to replace mine.
They are only made for our motorhomes and campervans. We had a mold made specifically for them so if you would like to purchase one please contact the office.
nuventureunit2@aol.com
01942 494090
Many thanks for watching
How did you join up the drain once you stuck down the shower pan?
I connected that to the drain before I put the shower tray down and left the excess under the van so could be cut to size to attach to the waste tank.
Many thanks for watching
@@dantheman321 thanks Dan - I thought that had to be the case but it didn't seem that way from the vid.
What kind of flexible tube are you using for the tilting sink drain?
BTW great video!
It's just normal corrugated waste pipe that you can buy for motorhomes. Many thanks for watching
the drop vent was drilled and a vent fitted what about corrosion in the hole in the floor?
Treated and sealed underneath
Hi what height/width is the bench seats before cushions are fitted please ,cheers
As always Dan..👍👍
Thanks Mark
Looking good-I need to slow the video down again though now...
Have you watched yourself in slow motion yet?
🖒🖒