How a Marlin Model 336 works

The Marlin Model 336 is a lever-action rifle and carbine made by Marlin Firearms. Since its introduction in 1948, it has been offered in a number of different calibers and barrel lengths, but is commonly chambered in .30-30 Winchester or .35 Remington, using a 20- or 24-inch barrel. Currently, the model with a 24-inch barrel is only available in .30-30 Winchester. The Model 336 is currently produced by Remington Arms.
en.wikipedia.org/wiki/Marlin_...
Marlin Model 336: full disassembly & assembly
• Marlin Model 336: full...
Don't try to recreate what you see in this video, as this is gameplay. This video was created using the game World of Guns:
store.steampowered.com/app/262...
This game is also available on Google Play, App Store, Amazon and other platforms.

[@FirstSpaceLord]

Thank you for making another "how it works" vid . I like them moren then the disassembly vids

[@Rancherinaz]

Very cool !

[@Keukeu45]

Thank you for that.

[@billbright1755]

Wonderful,, occasionally check screws with proper fit driver to keep from any loosening.
Clean and oil, will last forever.

[@richardlindquist5936]

Very nice!

[@alfarsalkald2235]

thank you

[@763studios]

Great Vid..could you tell me what exactly is forcing the 'loader" upwards allowing the bolt to carry it into the chamber? My loader isnt loading..its not coming high enough for the bolt to catch it and carry it into the chamber. it hits below the chamber hole. Thanks in advance to anyone who may be able to help

[@SirSoup420]

To me, it looks like the lever has a little 'spike' that, as you start pushing it back in, kicks up the 'v'-shaped tang on the bottom of the carrier. That lifts it for a brief moment, for the bolt to catch, and bring it the rest of the way forward.

[@TheShooter29]

Could you post some drawings of it for me?

[@Max-hw6xd]

Make the most famous machine gun of world war 2 the MG 42 (Maschinengewehr 42).

[@timsim1940]

Where are the locking lugs for a marlin? Like winchester 94 has their's right behind the bolt. What about marlin??

[@chaist94]

tim sim at the rear of the bolt

[@Alpha_team122]

What exactly supports the locking bar?

[@bighunterman77]

milled bits in the receiver...

[@akashmukherjee2405]

How AEK 971 / AK 107 works please.....

[@wabeckley]

😎👍

[@hoanglamdo1560]

i still can't understand how the ramp can fed up the rounds

[@Treblaine]

The lifter looks like it's improperly animated.
Look at 0:36 where you see the blunt point of the "lifter" (i.e. the ramp) is intersecting with the front edge of the lever piece.
I think the lever piece is supposed to catch behind that point on the lifter arm (ramp) and when the lever is brought back up it would catch it and force the lifter arm up.
Pause the video at exactly 0:37 then press the "." or "," key on your keyboard to go forward and back one frame at a time. You can see the lifter arm barely raises the cartridge in time to be caught by the bolt to be fed into the chamber and the only way it could be lifted is if the edge of the lever piece was riding on that protrusion under the lifter.

[@aidendonaldson1832]

Dude

[@declanstewart17yearsago35]

If only you could get this in 12 gauge

[@Francois_Dupont]

there are some 12ga lever action...

[@AK-hy5ut]

เม้นเเรก