Finally Completed.
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2024
- The final video to the K Swap Prelude series: custom exhaust piping, electrical work, battery relocation, and arriving late to my own car meet :D
Part list
- Skunk2 Alpha Header skunk2.com/exhaust-tuning/alp...
- 2.5 inch exhaust pipe amzn.to/4bsdIVi
- Jackspania k20 harness jackspaniaracing.shop/product...
- Hondata k pro www.hybrid-racing.com/product...
- Hybrid racing Conversion Harness www.hybrid-racing.com/product...
- Denso coil packs www.rockauto.com/en/moreinfo....
- NGK Spark plugs www.rockauto.com/en/moreinfo....
- OEM Vtec actuator amzn.to/3Sw83EV
- Battery relocation kit amzn.to/49mNiT4
- 150amp breaker amzn.to/3HLJkI1
- Hammer crimper amzn.to/42sdutl
- 0 gauge wire amzn.to/4935UI9
- Terminal post amzn.to/3w7iCXP
- Battery quick release amzn.to/4bE2M7g
- Jackspania Throttlebody jackspaniaracing.shop/product...
Prelude T Shirts www.ebay.com/itm/355096440502
My Amazon Store www.amazon.com/shop/rawrkee
AFFILIATES --
Jackspania jackspaniaracing.shop/?ref=u5...
► Discount Code: Rawr
Maxpeedingrods www.maxpeedingrods.com/?track...
► Discount Code: RAWRKEE
Carpuride carpuride.com/?ref=4aahvv8e
► Discount Code: ROCKYOUPRASITH
ATOTO amzn.to/47RzcJE
► Discount Code: 06RAWRKEE
Epidemicsound
► share.epidemicsound.com/mrvyo4
NordVPN (3 months free)
► ref.nordvpn.com/adicyqrqPAj
🚗 Essential Garage Tools
► Honda Oil Filters amzn.to/3egYw4m
► Brake Cleaner Pack amzn.to/463PNrC
► Shop Towels Pack amzn.to/3PeNv2f
🎥 My TH-cam Gear
► DJI Wireless Mic amzn.to/3W0LtnA
► Rode Mic amzn.to/3VZNBfA
► Heavy Duty C Stand amzn.to/3Y5xEFM
► Phone Mount amzn.to/3KFrcQw
*As an Amazon Influencer, I earn from qualifying purchases. - ยานยนต์และพาหนะ
That smile in the first drive, is wort it all the hours, days, frustration etc... Enjoy the Klude
Yeah bro, it’s sooo crazy that it’s up and running 😮💨😮💨😮💨😮💨
this right here!!! I remember the first drive when I k swapped my hatch and my Integra but when I boosted my hatch I could not for the life of me keep a smile off of my face that feeling is def something to remember
wish I seen more k swapped preludes! but glad its running !! gonna be a ripper
Bro, I'm so scared to beat on it hahahah
@@Rawrkee haha yeah make Sure it’s 100% solid and tuned before you do 🤣, I got on my turbo hatch before I got it tuned and there went the motor ☠️
Bro you need 3" exhaust piping
I knowwwww, I don't like how the prelude sounds right now -_- I have a apexi ws2 and its 2.5, so I just retained the size for now
Congratulations 🍾🎉🎈🎊 party time
thanks bro!!! drinkin rn hahah
Bro!!! Your at 12k subscribers!!!! I watched you since i was subscribed 1,877 lol! Love the lude content and your videos
preludes dont get enough love. awesome build.
hell yeah man congrats. i hope you make a parts list of all the parts you used at the end to help us kswap our own ludes :)
Congrats!!! Great job
Dude!! That’s so dope bro! Congrats!
Bad ass video man. I know that feeling of the 1st drive. Nervous but overjoyed to be driving it down the road. Well done bud. Congrats!!
That's awasome!!🎉 you did it!!
Nice work Dude congrats on the completion and sticking too it came out great 👍
Hell yeah brother!! Congratulations 👏👏
hell yeah
Ride on man! Congrats on the K swap.
Awesome job on your K swap Prelude, congrats! Can’t wait to see your next video! 😁👍
AWESOME! Congrats, man. Your hard work paid off.
Congratulations! Thank you for being an inspiration to us all!
Felt the excitement man when you first started it man, keep up the good work
Man great work!! About to have so much fun with it once you get everything sorted out. BTW would recommend adding a flex pipe to be safe and not crack your header
Well done mate, you should be proud of yourself 👍
Congrats man
Congratulations, I been watching you since when you use to post on the Hmong page on Facebook. I enjoy your videos.
LOL, those were the good ol day hahah and dengggg, thanks for stickin around :D
Good job!
Congrats my guy im glad you were able to accomplish something like this, hopefully one day im able to follow in your footsteps keep up the videos :D
That’s so awesome bro. Congrats fr! You gave me all the confidence do to a k swap to my own prelude
do it !! k is the way
Awesome! Cant wait to get mine running :P
Wow congrats man
Congratulations
Congrats
Good shit! I’m keeping up with the build now!
This is awesome 👏
And finally it’s done congrats must be good feeling driving the swap for the first time 👍🏻👏👏👏 can’t wait to get my swap done
frickin love it dude good work
Thanks bro!!! I'm happy I got it done before the move 😁😁
Awesome work! Hasport needs to get a kit together using your DIY mounts!
Awesome!
🔥🔥🔥🔥🔥🔥 headers fit in well.
they sure do bro but I ended up making a lot of extra clearance because I was paranoid hahah
i really admire your work on the car. thank you for sharing the progress. - Mike
Awesome video! So close on my ek k swap!
The intake fits great
I have the same harness on my daily kswap just remember to rewire the crank shaft sensor connector if it's a k24
EPIC
Congratulations bro, you are my inspiration on everything lude 👍
Thanks bro!!! Just follow through and you can make anything happen 💯💯💯
🎉🎉 bravo 🎉🎉🎉🎉
I love that feeling ma boy ! U got it done !! I just started my crx k20 on Sunday having issues engaging fuel but I turned it on directly and it worked !!
k20 Crx is gonna be nasty!!
Make sure to create a Junction box on top or near your junction mount with a constant power Fuse block and switch Power fuse block all combined into a breaker then to the engine etc for any future add-ons like a dashcam etc make sure to use fuse taps and extend the wires like from a hardwire kit etc. Its the proper and clean way also label everything with a device that can print them I did this on my E46 It was very handy for when I did my 3000CFM Efan make sure you also have a powerful enough alternator if that dies out the battery will etc
You can use 750 Heltech ECU , it about 2,000 $ it you can more options for boost control 5bar map sensor temperature sensor, air fuel ratio , injector pluse , spark pluse , and extra inputs and much more. You 2500$+ 1500Heltech or 2500
So happy for you! I soon plan to drop a k series in my em2!
I def recommend ! k is the way! I k swapped my hatch, then I had to do its to my Integra also lol now doing it for the third time on a coupe lol
@@egmarkoz no way haha i soon wish to be as much as a honda guy like you! i only have one car but i want more :)
@@THEGHOSTEDITS haha it’s just patience and some good friends for motivation haha ,gets hard at times ,but it’s def fun and funny memories made with the homies putting them together ! You’ll be here one day too🤟🏽
@@egmarkoz definitly some day soon! im still just 16 and new to the scene and glad i have a few buddies who are into cars (im the honda guy of the bunch) but cant wait to really connect and make memories!
Yooo!!🔥🔥
Yeahhhh mannn, its' real XD
Yesss lets fucking go
yeahhhh man :D
KEEEEEN
Lets GOOOOO
You need to recheck your shifter cables
Ayeeeeeeee
Congrats bro, you popped your engine swap cherry 🍒!! I can’t believe there’s such little aftermarket support for the 5th gen Prelude…well done my friend, you know what you are doing, so this will be an awesome build too watch!
Hell yah bro congrats!
Unless you run more then like 8-900w you shouldn't need more than 4gauge wire dash cam and what not use very little power
Why not just get a lithium battery or an actual AGM battery? Either way, beautifully done, awesome engine bay and tuck. Cuhhh-leaannn!
Awesome build bro, im getting my parts together for the k swap, what axle did you end up using for the driver side if the prelude one was too short?
Thanks bro, I ended up using the entire TSX setup. Driver axle, passenger axle, and halfshaft. The prelude driver axle was too long for the passenger side and it caused excessive vibrations
Dang bro, I wanted to see you wire in the conversion harness 😢
You only need 4 of them to get the car running: starter, o2 sensor relay, fuel pump relay, and main relay.
The other wires I haven’t figured out yet 😅
Im at the same point, i am trying to figure out how to get the cluster to work with the conversion harness and stock harness, bit of a headache lol
@@Phill135 the hybrid racing harness has wires for the CEL, and RPM. The temp gauge goes straight to the temp sensor. The mph is pretty tricky. Vtec academy has a video on that. Once you get mph to work, then you’ll have to calibrate it to read correctly
@@Rawrkee ahh okay awesome, have you got your mph working?? I just got my motor and trans waiting on the mounts, you have been a huge inspiration for getting this done thanks for all the info by the way!💪🙏
I love the build, were you able to keep the ac?
Thank you! No, I don’t have AC but I’ll get it eventually :D
@@Rawrkee definitely make a video on it! I’d be curious to see how you’d handle it
Add turbo. Brother 😊
Why didn’t u keep the h22 bro
I already rebuilt it and there wasn’t anything else to do besides boosting
You should wrap or paint the exhaust headers. It's gonna look all ugly and rusty in a couple of months of driving. It's not fun polishing headers.
AHhhhh mann, it already turned gold... I didn't expect that to happen haha
Curious where you moved to? 😅
YOU NEED A FLEX PIPE or that Header & exhaust will crack & brake. Not having a flex pipe on that test pipe near the header is Bad Shit dude it puts too much weight & stress in that aera & that will lead to Cracks & Brakeage happening to the stressed out metal.
Wat shifter box you ran ?
I’m running the no cut shifter box from hybrid racing for the z3 transmission. I still had to make modifications since it’s not designed for the prelude
@@Rawrkee thank you we got the first pair out of k series mount straight from hasport and that’s all we was missing to order
*Unibit/Step bit.
Fifth place 😮😂