LOVED the no talking! Finally, a video that gets straight the point and not a bunch of blah blah blah. Usually I have to skip forward 2 or 3 minutes just to avoid people's nonsense lol
You did a great job with the video and explaining it. Was caught off guard a little by no verbal notations, but never the less a very informative video. Tanks!
Thank you so much I had a winch in my house for 3 years a I didn’t know what to do and today (January 2021 8th) I was like I want to install it and I tipped it up and this came up and I watched it and then I installed it and my family is happy now so we don’t have to get our excavator or tractor thank you so much🙏🙂
So KFI says you can rotate the end posts 90 degrees. So that would make it where you don’t have to cut your plastic, I’m worried that you hit something just right you would rip that meg terminal right off.. thoughts? 4:20
Yeah you sure did a great job with the video explaining it the problem is is you’re the only one that can see what’s going on chip for a couple of times I might’ve caught up eyeball shot yeah you might wanna think about putting a camera on what you’re doing instead of bouncing all over the garage and stuff just saying.
Watched your video on the tires and was like i sure wish he would make a video on that winch. low and behold. You the man! Just got a 2021, your 19 still holding up?
LOVED the no talking! Finally, a video that gets straight the point and not a bunch of blah blah blah. Usually I have to skip forward 2 or 3 minutes just to avoid people's nonsense lol
You did a great job with the video and explaining it. Was caught off guard a little by no verbal notations, but never the less a very informative video. Tanks!
Thank you so much I had a winch in my house for 3 years a I didn’t know what to do and today (January 2021 8th) I was like I want to install it and I tipped it up and this came up and I watched it and then I installed it and my family is happy now so we don’t have to get our excavator or tractor thank you so much🙏🙂
By far the best installation video! Good job!
So KFI says you can rotate the end posts 90 degrees. So that would make it where you don’t have to cut your plastic, I’m worried that you hit something just right you would rip that meg terminal right off.. thoughts? 4:20
If KFI said that you can do that, then go for it, Goodluck.
Outdoor Ed yea finally found it on their site. www.kfiproducts.com/QR-CODES/Winch%20Lead%20Rotation%20Manual.pdf
Yeah you sure did a great job with the video explaining it the problem is is you’re the only one that can see what’s going on chip for a couple of times I might’ve caught up eyeball shot yeah you might wanna think about putting a camera on what you’re doing instead of bouncing all over the garage and stuff just saying.
Why don’t you show step by step how the bracket is attached to 4 wheeler then how the wench is attached to the bracket and use a light so we can see
My wench is in the kitchen making me a sandwich my winch is mounted to my Honda Rancher LOL
I bought a new four wheeler and that helped a lot thanks
What mounting bracket did you use?
If you type on Google, honda rancher winch mount It will appear, there is a honda rancher kfi winch mount for sale on google
In my video, if you play it at 1:50, it shows the bracket
www.allterraindepot.com/products/101175-honda-rancher-foreman-rubicon-winch-mount?variant=32079604556¤cy=USD&+shopping&_vsrefdom=adwords&gclid=CjwKCAjwxOvsBRAjEiwAuY7L8mnJehyHHJRg2m2-uZ39V59O_IAEdNuvTxxXE8BOyGzvgCtlDqQ1LxoCy54QAvD_BwE
@@OutdoorEdY Thank you for the video! I have the same machine and looks easier than the Harbor freight winch install.
I'm glad the video helped
This video was great and it was a HUGE help! Thanks
Thank you outdoor Ed, very cool
I tripod to keep the video footage stable would have been nice. Otherwise thank you for sharing.
Did your solenoid come with the winch or did you have to order it separate?
It came with the winch
Is your cable coming off the bottom or top? I put my winch on upside down. But used a different mount . Mine is coming off the top . Foreman 500
My winch cable comes from the top, I dont think it really matters
Outdoor Ed pretty sure it does . Everywhere i read say bottom
Ok do bottom, just take all the cable out and do the opposite way
Outdoor Ed with the winch being on upside down i dont think it’s possible 😂 imma look into it tomorrow
Ok no problem, you can watch my other video of me actually using the winch
I can’t figure out where to put the red wire I’m confused on that part
For that red wire you will need to buy that connection that plugs into the red plug, then that red wire will connect to the butt connector
You’ll have to tap into the pink wire on your ignition
@@OutdoorEdY do you know what that plug is called I've called Honda and they can't help me
@@OutdoorEdY do you have the part number for that connector? I can’t find it
Watched your video on the tires and was like i sure wish he would make a video on that winch. low and behold. You the man! Just got a 2021, your 19 still holding up?
Yessir it sure is holding. Thankyou
You should really consider being an affiliate for this winch company, you could of made a couple K off of this video.
and does it give you instructions on the wire for out and in
Will this fit a badland winch too?
Kfi's website says it will fit a badland winch, but not the fairlead, so you will need to buy a kfi fairlead, which is only like 10 bucks
when you put the winch on does it give you directions
Yes
@@OutdoorEdY thanks
What kind of winch is that
Kfi winch
Outdoor Ed what size
@@Antoniomartinez-ww1wu it is a 2500 kfi winch
can you link the parts you got? and where?
www.amazon.com/dp/B078BYV2FL?ref=ppx_pop_mob_ap_share
did u put a plow on it
No
@@OutdoorEdY nice
what year is it
2019
Nice
Talk to me
Hi
Sorry, couldn't finish watching this vid. I got sea-sick trying to watch. couldn't with all the sudden movements.
Sucks
I tried the blue cable and no go for me