How To Install A Warn Winch HONDA TRX 520 / 420 / MAX'S MOTO SHOP

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ม.ค. 2025
  • In this one I install the Honda warn winch onto the 2022 Honda Rubicon 520 this install will be the same for the foreman and the 420 as well if you have any questions leave them in the comments below thank you for watching.
    As an Amazon Associate I earn from qualifying purchases
    Synthetic Winch Rope: amzn.to/3JAnx6D
    TOOLS I USE!!!
    DeWalt Impact/Drill Combo: amzn.to/3F0m5sF
    T-Handle Allen and Torx: amzn.to/3KTHRSF
    Bike Stand: amzn.to/3Zyig5Q
    amzn.to/3ZFf34y
    Tire Spoons: amzn.to/3mtIoRb
    Rim Saver: amzn.to/3ZJTRKq
    Hear Are the links for the products I have installed on my Sur Ron
    JFG Foot Pegs: amzn.to/3SOwZHA
    Kemimoto Foot peg support bar: amzn.to/3Jfergv
    Plug and Play Headlight Kill Switch: amzn.to/3EYtAjS
    JFG Handlebars: amzn.to/3SPFhim
    Pro Taper Pillow Top Grips: amzn.to/3ZC0LBw
    JFG Rear Mud-flap: amzn.to/3KYC0LW

ความคิดเห็น • 96

  • @Maxsmotoshop
    @Maxsmotoshop  ปีที่แล้ว +1

    Synthetic Winch Rope: amzn.to/3yymrTv

  • @richardwilliams4648
    @richardwilliams4648 2 ปีที่แล้ว +17

    By far the best instructional video for a winch install onto a Honda. Thanks for the time and effort put into making this.

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว +1

      You’re very welcome I’m here to help👍

  • @BeyondConventional
    @BeyondConventional หลายเดือนก่อน +2

    I’m going to share this video link it’s the best Rubicon winch installation video out there!

    • @Maxsmotoshop
      @Maxsmotoshop  หลายเดือนก่อน +1

      @@BeyondConventional thanks for the support

  • @benb2058
    @benb2058 11 วันที่ผ่านมา

    Wow I like a good challenge looks like this one will not disappoint it's pretty intimidating and definitely hard to find the courage to take a brand new machine and start performing this operation after skimming through the instructions I had the dealer print out I thought it would be a piece of cake my initial reaction after watching your video is maybe I've biten off more than I can chew!
    Really most difficult things are intimidating until you learn something about them and then fear is replaced with knowledge thanks for taking the time to make this video pretty sure if you hadn't have I would be taking the machine back to the dealer with the newly purchased plow and winch kit by the way first time I have commented but I've used several of your install videos on my Honda motorcycles also thanks!

  • @GoKenIchiGo
    @GoKenIchiGo ปีที่แล้ว +1

    This video will 100% get you to an installed winch. Thank you!

  • @Tom-ej8bb
    @Tom-ej8bb 11 หลายเดือนก่อน

    Glad to see you’re using knee pads I suggested a while back. Wish you were in our area!!! Would love to be a youngster and have you as a mentor!!! Excellent job and video!!!

    • @Maxsmotoshop
      @Maxsmotoshop  11 หลายเดือนก่อน

      Maybe one day!

  • @rnrudynh1427
    @rnrudynh1427 ปีที่แล้ว +1

    The warn 2500lb winch I just Installed on my son's '22 Honda recon 250 has jenky wire lengths. We made it work but the color coded wires were all backwards. Just an FYI.

    • @Maxsmotoshop
      @Maxsmotoshop  ปีที่แล้ว

      You most likely ordered a generic winch kit and mount not the actual Honda accessory made for the machine

    • @Maxsmotoshop
      @Maxsmotoshop  ปีที่แล้ว

      This kit is a Honda accessory and fits perfect👍

    • @rnrudynh1427
      @rnrudynh1427 ปีที่แล้ว

      @@Maxsmotoshop much easier install on the bigger machine by the looks. The mounting plate we used from MOOSE industries got mounted to the diagonal frame member near the steering column. Had to pre mount the winch. Not fun

    • @rnrudynh1427
      @rnrudynh1427 ปีที่แล้ว

      @@Maxsmotoshop I saw a video and ordered what was in the description. They were using '22 recon so I figured I was safe. It works great . He's happy. Solid dad points

  • @bm5666
    @bm5666 2 ปีที่แล้ว

    Good amount of detail, really helps out when planning on how to do these jobs yourself.

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว +3

      I feel like I might’ve went overboard and made the video too long but it’s all good information I hope you found it useful👍

    • @bm5666
      @bm5666 2 ปีที่แล้ว

      @@Maxsmotoshop it’s useful when your trying to figure out the best ways to get the job done, appreciate the video

  • @GoKenIchiGo
    @GoKenIchiGo ปีที่แล้ว +5

    why is the parts list not in the description you said it would be there?
    Edit:
    Here's the kit:
    08L70-HR6-MF0
    winch
    08L71-HL5-E61
    subassembly for the winch:
    08Z01-HR3-A20
    substitute subassembly for above if you dont have the 12v socket
    socket 08Z00-HR3-A20
    check you manual or fitment site to make sure

    • @DargoDog
      @DargoDog ปีที่แล้ว

      Wondering the same thing. I am in the middle of this install, and was wondering where the bar clamp was. For $400, I think I will come up with something else. For the cost, all of this stull should be included with the winch.

  • @JorgePerez-ji7hi
    @JorgePerez-ji7hi 2 ปีที่แล้ว +1

    Great instructional video. Better than I have seen prior. Could you provide information on the mounting plate bracket and who makes them? I like the fact that the winch is mounted on top instead of upside down like other brands.

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว

      This is the warn winch and mount

  • @RichardSteele-d4f
    @RichardSteele-d4f ปีที่แล้ว

    2024 Rubicon. Good to go. Thank you.

  • @XxClemsonTigersXx
    @XxClemsonTigersXx 15 วันที่ผ่านมา

    I'm using a harbor freight 3500 pound winch and when connecting its red cable to the harness what do i need to do? Does the red naked cable just go into the hole? Do I put the cable into the harness connector and crimp it down?

    • @Maxsmotoshop
      @Maxsmotoshop  14 วันที่ผ่านมา

      I have never installed a harbor freight winch

  • @radioace318la
    @radioace318la 7 หลายเดือนก่อน

    A most excellent and informative video. thank you, sir. What does a typical Honda shop charge labor to do this install? Also, I much prefer this install as opposed to the top-mount exposed unit.
    Cheers from N/W Louisiana.

    • @Maxsmotoshop
      @Maxsmotoshop  7 หลายเดือนก่อน +1

      Personally, I can install this winch in just over an hour, most people take around 2 to 3

    • @radioace318la
      @radioace318la 7 หลายเดือนก่อน

      @@Maxsmotoshop thanks!!

  • @fin-addictyaker6573
    @fin-addictyaker6573 ปีที่แล้ว

    Hey man, I have a question.
    On the sub harness, you mentioned one of those extras pair of wires are for heated grips. Can you use those wires to install the Warn Hub bluetooth controller? Thanks

    • @Maxsmotoshop
      @Maxsmotoshop  ปีที่แล้ว

      The extra wires are positive and negative. You can use them for whatever accessories you would like.

  • @andyhosmer9073
    @andyhosmer9073 ปีที่แล้ว

    Am I doing this right? all the parts I need add up to $730. using Honda parts?

  • @JohnnyRebLa
    @JohnnyRebLa ปีที่แล้ว

    I'm about to put one on my rancher and thought you might know if what seems upside down to me like this winch is put on is this the only way they fit? Every honda video on here I've found puts them on that way. Seems upside down one because of the emblem and two because I don't want to run my wires down the exhaust side and wanted to know if this is the only way.

    • @Maxsmotoshop
      @Maxsmotoshop  ปีที่แล้ว

      This is the correct way to install the winch

  • @kevinthomas9689
    @kevinthomas9689 8 หลายเดือนก่อน

    hello I would like to know if a warm 3500 is too big for a 520 rubicon and which support model you take thank you :)

    • @Maxsmotoshop
      @Maxsmotoshop  8 หลายเดือนก่อน +2

      I don’t think there will be room in the frame the 2500 pound is tight as it is and is also more than enough to pull this little machine around

  • @timking2194
    @timking2194 4 หลายเดือนก่อน

    Great video

  • @ghostflight73
    @ghostflight73 ปีที่แล้ว

    NIce vid. Just a question. Just picking up our rancher new next week. Was planning on winch and attach plate sourced from amazon (warn or superwinch brand) Can i ask if felt it was worth paying the way higher price for the honda dealer supplied kit with the extras?
    Lastly, if you were buying a plow again any suggestions now that you have installed one? 100% happy with brand and model? Cheers

    • @Maxsmotoshop
      @Maxsmotoshop  ปีที่แล้ว

      I’ve been installing these for years you go at this brand because it is quality they can still have problems, but usually seem to last the life of the machine. The Honda plow and mount are very sturdy and well built will not bend, but there are a few decent aftermarket brands as well.

  • @doughill4070
    @doughill4070 ปีที่แล้ว

    Is that a cb 650 in the background, I need the front brake assembly from caliper to master cylinder.

    • @Maxsmotoshop
      @Maxsmotoshop  ปีที่แล้ว

      That would be a CB 750 dual overhead cam

    • @doughill4070
      @doughill4070 ปีที่แล้ว

      Are you parting it out ? I need the front brake assembly.

    • @Maxsmotoshop
      @Maxsmotoshop  ปีที่แล้ว

      @@doughill4070 I might have an extra

    • @doughill4070
      @doughill4070 ปีที่แล้ว

      Did you have one ?

  • @krishermanowski3599
    @krishermanowski3599 ปีที่แล้ว

    Hey could you please provide me with the pain number or link to where I can get the relay mount clamp so I can use that on my atv!!.

    • @Maxsmotoshop
      @Maxsmotoshop  ปีที่แล้ว

      The relay mount came with my winch kit this is a Honda original accessory kit not an aftermarket

    • @krishermanowski3599
      @krishermanowski3599 ปีที่แล้ว

      @@Maxsmotoshop yea but I’m the kit doesn’t it give you a part number for all the prices in the instructions. They usually do that. I really need that mounting bracket. Is it possible you can help me get one. Can I order it from Honda?

    • @krishermanowski3599
      @krishermanowski3599 ปีที่แล้ว

      @@Maxsmotoshop can I at least get a link of the winch kit from Honda so I can order the whole thing then. Or at least the part number to the kit. Thanks.

  • @highlonesome7482
    @highlonesome7482 ปีที่แล้ว

    Great vid!
    Will this also work on a 2018 Rubicon?
    Thanks! And keep up the great content!

  • @dootdeedootdeedoo
    @dootdeedootdeedoo 2 ปีที่แล้ว

    So any tips if you need to put a new cable or strap on the winch. I feel like I'm gonna have to at least pull the bumper off.

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว

      It only takes 5 to 10 minutes to pull the front bumper off and remove the winch from the machine. If you need to change the cable it’s usually fine though keep it clean and untangled while you’re winding it in.

    • @eriklindgren1047
      @eriklindgren1047 2 ปีที่แล้ว

      @@Maxsmotoshop Yeah, I wasn't a fan but got it done. Like a said not hard just annoying when it's cold out

  • @Kyle-ck1sh
    @Kyle-ck1sh 7 หลายเดือนก่อน

    Do you need the sub harness?

  • @Burnafatty420
    @Burnafatty420 วันที่ผ่านมา

    Guys i have 2008 Honda Rincon i would greatly appreciate if someone could show me where i can find a winch mounting bracket. That will fit Thank you

    • @Maxsmotoshop
      @Maxsmotoshop  วันที่ผ่านมา +1

      If you go to the Honda ATVs website under accessories, they will have the proper kit for your machine

    • @Burnafatty420
      @Burnafatty420 12 ชั่วโมงที่ผ่านมา

      @Maxsmotoshop Thank you buddy Appreciate it.

  • @jasonkibler3616
    @jasonkibler3616 2 ปีที่แล้ว

    That solenoid bracket did not come with my warn winch mount kit and all terrain the company I ordered from told me there was no such thing

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว

      This is not just the warn kit. It is a Honda original accessory kit. Sounds like you have a generic warm kit. If you go to the Honda ATV website under accessories, you can view this kit.

    • @mrthale58
      @mrthale58 ปีที่แล้ว

      Has anyone had any luck finding the contactor mounting bracket? Thanks

  • @robinbex1944
    @robinbex1944 2 ปีที่แล้ว

    Will all these parts fit on the 22 rancher?

  • @Dr650rob
    @Dr650rob 11 หลายเดือนก่อน

    I hope I have all of those parts

  • @troyrussell6802
    @troyrussell6802 11 หลายเดือนก่อน

    where did you get the winch?

  • @tonyzache
    @tonyzache 2 ปีที่แล้ว

    Will these parts work on a 2023?

  • @nikri-ir3ey
    @nikri-ir3ey ปีที่แล้ว

    Excellent

  • @Vhiadra
    @Vhiadra 2 ปีที่แล้ว

    What size of winch is that

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว +1

      I believe it is the 2500 pound

    • @Vhiadra
      @Vhiadra 2 ปีที่แล้ว +1

      @@Maxsmotoshop thank you going to try to put a 4000 lb winch on mine if it fits.. I'll find out soon 🤣

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว +1

      @@Vhiadra That’s kind of a waste the machine only weighs about 700 pounds and if you use a poly block the 2500 pound becomes a 5000 pound

    • @Vhiadra
      @Vhiadra 2 ปีที่แล้ว

      @@Maxsmotoshop I know that, but I have a brand new 4k winch here if it fits it'll be going on, rather then buying another winch lol

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว +1

      @@Vhiadra oh ya 👍

  • @stevemiller4148
    @stevemiller4148 2 ปีที่แล้ว

    Great video that helped me install my winch on my 23 Rubicon. Where did you get the clamp to clamp the solenoid to the frame bar?

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว

      Everything I used in the install came in the Warren Honda accessory kit

    • @robertflick520
      @robertflick520 2 ปีที่แล้ว

      @MaxsMotoShop where did u buy it from or do you have that part number?

    • @brianvandenbloomer6931
      @brianvandenbloomer6931 2 ปีที่แล้ว

      I bought the WARN 101020 VRX 25-S Powersports Winch with Handlebar Mounted Switch and Synthetic Rope: 3/16" Diameter x 50' Length, 1.25 Ton (2,500 lb) Capacity
      It came with no relay bracket. Pretty disappointed about that.

  • @00rule
    @00rule 2 ปีที่แล้ว

    Where can I find that bracket for the relay

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว

      It will come in the box with the winch or the mount

  • @billy7805
    @billy7805 ปีที่แล้ว

    You need a hoist

    • @Maxsmotoshop
      @Maxsmotoshop  ปีที่แล้ว

      Y??

    • @billy7805
      @billy7805 ปีที่แล้ว

      So tour not sitting or laying of the floor.
      But you do you

  • @redblue40rc33
    @redblue40rc33 12 วันที่ผ่านมา

    Not sure Abt his dancing around at the beginning of his videos.. kinda creepy

    • @Maxsmotoshop
      @Maxsmotoshop  12 วันที่ผ่านมา +2

      Hope it scared you

  • @vintagetrk
    @vintagetrk 10 หลายเดือนก่อน

    Your explanation of connecting the sub harness SUCKED!!!

    • @Maxsmotoshop
      @Maxsmotoshop  10 หลายเดือนก่อน

      The other 30,000 people seem to have got it it must YOU 👍

    • @Maxsmotoshop
      @Maxsmotoshop  10 หลายเดือนก่อน

      I just watched that part of the video could not be more clear and once again, nobody else has been confused

    • @vintagetrk
      @vintagetrk 10 หลายเดือนก่อน

      Yeah I never saw a clear explanation of it. If you wanna point it out then it could help.

  • @robinbex1944
    @robinbex1944 2 ปีที่แล้ว

    Will all these parts fit on the 22 rancher?

    • @Maxsmotoshop
      @Maxsmotoshop  2 ปีที่แล้ว

      Yes, it will fit a TRX 420