It has been more than a year since he had installed the TOSHIBA unit. How is it coming along? Any problems like were shared in the comments? Like the digital display type.
Might be due to low voltage. Try checking if all your screws are tightened properly and wires connected properly. If you're not sure, consult an electrician.
That's a good request. I forgot to cover these 3 buttons in my video. Pressing the TEST button shuts down the heater, pressing the RESET button doesn't seem to do anything (even when I press and hold the button down), pressing the PUMP button turns the pump on or off.
As for my water heater. I Just use the button to on and off water heater cos even my switch is off as long the eclb and earth light still ON, the water still can be hot.
Update: just discovered your set dont have rain shower set. Another question, the LED display will always active all the time? In case we forgot to switch off the main switch for 1 hour (or more) after we used it... Thanks
The water pressure is adequate for a bath but not as strong as some of those water heaters with more powerful but noisy pumps. These louder water heaters have stronger water pressure and will give you a massaging effect. With this Toshiba model, the pressure is not strong enough to produce a massaging effect.
@@thetreasonseason That means his Safety fuse in main fuse box is disabled and he is actually using ground as null. His meter probably will not count the electricity consumption either. I don't think it worth to save few RM just so you die instantly in case of shorts or electrical accident anywhere in the house.
I have connected all the three wires correctly. But the earth indicator did not light up. I even call certified electrician to look at it. Still similar issue. 😔
Yeah same with mine. Have you figure out what to be the problem... I just bought this water heater online, so it is very difficult to claimed the warranty if fault
@@90cyno Huhu I thought just plug and play from previous water heater... But just a waste of money... If you can share tips It will help me a lot please 👍. I don't know what to do 😂
@@zahinnazri1037 Well.. I'm not sure how to put this in words since it gonna be quite lengthy. But as you see in this video, the water inlet was PVC, in my case it was a tube hose with copper bolt nut in the end, connected to the water heater. During testing, I noted that there was electricity conducted in the copper bolt. What I did was putting a wire to earth this electricity from that bolt to my metal door frame (twist a few loop of wire at the bolt and screw/drill it to the metal door). You may try connect it to any window grill as long as it metal or better conductor. Try and see if it work. Make sure it not gonna be wet when you take your shower, for safety. But it is better to improve earthing in your building by adding more earthing copper rod or ask certified electrician about it.
Hye there, i bought mine same brand but different model with dc pump. When i switch on, elcb and earth light is turn on But power not light up and water heater not operate. What is happen?
I have the same problem. This problem is.. your water inlet cannot reach 1.5l/m, the pump cannot ON, and the heater cannot function. So, what I'm doing, just bypass water control inlet and it's function. Another thing, this model use dc motor, so not power like ac motor.
@@davidtv9727 Sorry, my earlier reply was wrong. I just checked my unit again and there is a "pump" button located on the left side of the casing. This pump button can be used to turn the pump on or off manually.
It is standard mandatory IP25 (splash proof) and no, most of them are not, that's why they have a electrical safety circuit which turns of entire unit in case of electric leak (short)
I'm not a repairman. I suggest you contact Toshiba support or ask an electrician to have a look at it. In the meantime, you should not use the water heater as it could result in someone getting electrocuted while having a shower.
@@vajrakilaya thanks for answer I install the machine opposite room soo I can get anyproblem thanks for care .....I need ask to some electricians if is that the problem .....thanks
Bought this model slightly more than one year ago. To be honest, I bought this because of the sleek design as I've never owned a Toshiba product, usually go for Panasonic. Now this Toshiba water heater is not heating anymore, tried turn on and off, it worked for the first time and that's it. I wonder is small appliances today are made to last for not more than 2 years? I mean never expected them to last a life time, come on lasted for hardly two years?! (Well, I do have a National Rice Cooker than still can be functioned even after more than 60 years now). Disappointed product.
@@sedaka3 betul bro. Ikutkan elok lagi cuma rosak valve air je kalau on je memancut dalam tu. Spare parts takda dah. Quality barang dulu tak sama sekarang.
I purchased toshiba model-DSK-38ES38MW,my problem is if its running with hight temp(ex45c°) heater getting tripped.pls give a advice.
It has been more than a year since he had installed the TOSHIBA unit. How is it coming along? Any problems like were shared in the comments? Like the digital display type.
My unit is still working fine.
@@vajrakilaya Great! Thanks!
I think we buy from the same shop. Just wondering why is the water not hot enough even at max 48c. Do you know how to fix this?
my unit : why is my temperature blinking? instruction manual says that is becoz of unit underpowered? what does that even mean?
Might be due to low voltage. Try checking if all your screws are tightened properly and wires connected properly. If you're not sure, consult an electrician.
Hi do you mind to test the 3 buttons on the side of the heater?
That's a good request. I forgot to cover these 3 buttons in my video. Pressing the TEST button shuts down the heater, pressing the RESET button doesn't seem to do anything (even when I press and hold the button down), pressing the PUMP button turns the pump on or off.
As for my water heater. I Just use the button to on and off water heater cos even my switch is off as long the eclb and earth light still ON, the water still can be hot.
I have earth symbol nt light up....
@@vajrakilaya Pressing reset after pressing test, will reset unit back to operational.
Hi sir...your set comes with rain shower or not? Already ordered one from shopee.
Update: just discovered your set dont have rain shower set.
Another question, the LED display will always active all the time? In case we forgot to switch off the main switch for 1 hour (or more) after we used it...
Thanks
@@khairulaffendi6340 Yes, mine does not have rain shower. The light will turn off when you turn off the main wall switch.
@@vajrakilaya... Mine the LED still ON when i off the wall switch. 🤔
How's the water pressure? In the video it looks pretty weak
The water pressure is adequate for a bath but not as strong as some of those water heaters with more powerful but noisy pumps. These louder water heaters have stronger water pressure and will give you a massaging effect. With this Toshiba model, the pressure is not strong enough to produce a massaging effect.
@@vajrakilaya thank you for your reply
just bought 2 unit of this model, dont buy.. i repeat, dont buy, the pump water pressure is totaly pathetic, got pump like no pump.
Thank you for this comment. I nearly buy 2x!!
baru...baru cadang nak beli 2 bijik model toshiba...tapi hat murah skit la..takat yang ada DC pump je...
Quite dangerous if using yellow wire as live… normally green/yellow for earth, red/brown/white for live, black/blue for neutral
but the wire he had were green, yellow and black..so how?
@@thetreasonseason That means his Safety fuse in main fuse box is disabled and he is actually using ground as null. His meter probably will not count the electricity consumption either. I don't think it worth to save few RM just so you die instantly in case of shorts or electrical accident anywhere in the house.
Want to know is your water have low pressure because you using pump.
I don't have pressure problems here but I like the increased jet pressure that the pump gives.
I have connected all the three wires correctly. But the earth indicator did not light up. I even call certified electrician to look at it. Still similar issue. 😔
Maybe you have a faulty unit? What did your electrician say after examining it?
Yeah same with mine. Have you figure out what to be the problem... I just bought this water heater online, so it is very difficult to claimed the warranty if fault
@@zahinnazri1037 Solve it, but not in a proper safe way. Not recommend it. The main issue likely is poor / not enough earthing in the building.
@@90cyno Huhu I thought just plug and play from previous water heater... But just a waste of money... If you can share tips It will help me a lot please 👍. I don't know what to do 😂
@@zahinnazri1037 Well.. I'm not sure how to put this in words since it gonna be quite lengthy. But as you see in this video, the water inlet was PVC, in my case it was a tube hose with copper bolt nut in the end, connected to the water heater.
During testing, I noted that there was electricity conducted in the copper bolt. What I did was putting a wire to earth this electricity from that bolt to my metal door frame (twist a few loop of wire at the bolt and screw/drill it to the metal door). You may try connect it to any window grill as long as it metal or better conductor. Try and see if it work. Make sure it not gonna be wet when you take your shower, for safety.
But it is better to improve earthing in your building by adding more earthing copper rod or ask certified electrician about it.
cute cat
Tq
Hye there, i bought mine same brand but different model with dc pump. When i switch on, elcb and earth light is turn on But power not light up and water heater not operate. What is happen?
Have all 3 wires been connected properly? Earth, Live and Neutral
I have the same problem. This problem is.. your water inlet cannot reach 1.5l/m, the pump cannot ON, and the heater cannot function. So, what I'm doing, just bypass water control inlet and it's function. Another thing, this model use dc motor, so not power like ac motor.
@@sazalihusin7665 mcm mne cara bypass water ctrl inlet?...skrg dh lepas setahun, masih berfungsi dgn baik ke?
@@fareastzfz4799 ada solution tak bro ? saya jadi benda yang sama
@@sazalihusin7665 bypass macam mana tu ?
This pump is automatic? Pump swift?
Yes automatic. No manual shut off
@@vajrakilaya how with water pressure? better panasonic or this toshiba?
@@julyjuly9028 I don't have a Panasonic with pump. Water pressure on this one is moderate but not strong enough for that massaging effect.
The dc pump is automatic turn on and off? Can It turn on and off manually?
Yes it's automatic. You can't turn it off manually
@@vajrakilaya ok, thanks
@@davidtv9727 Sorry, my earlier reply was wrong. I just checked my unit again and there is a "pump" button located on the left side of the casing. This pump button can be used to turn the pump on or off manually.
@@vajrakilaya wow, good to hear that. Thanks a lot.
Good video...
The unit is not water proof? 😱
It is standard mandatory IP25 (splash proof) and no, most of them are not, that's why they have a electrical safety circuit which turns of entire unit in case of electric leak (short)
Hallo please have same brand just use 3 time and now the elcb blinking sometime work some time stop u can have number phone or line thanks
I'm not a repairman. I suggest you contact Toshiba support or ask an electrician to have a look at it. In the meantime, you should not use the water heater as it could result in someone getting electrocuted while having a shower.
@@vajrakilaya thanks for answer I install the machine opposite room soo I can get anyproblem thanks for care .....I need ask to some electricians if is that the problem .....thanks
Bought this model slightly more than one year ago. To be honest, I bought this because of the sleek design as I've never owned a Toshiba product, usually go for Panasonic. Now this Toshiba water heater is not heating anymore, tried turn on and off, it worked for the first time and that's it. I wonder is small appliances today are made to last for not more than 2 years? I mean never expected them to last a life time, come on lasted for hardly two years?! (Well, I do have a National Rice Cooker than still can be functioned even after more than 60 years now). Disappointed product.
My National water heater works for almost 20 years until now their valve leak and cannot find any spare parts
@@mohdezwandymohdsulaiman biaq betik..?? ni ceq baru nak riki² nak beli water heater toshiba 2 biji ....
@@sedaka3 betul bro. Ikutkan elok lagi cuma rosak valve air je kalau on je memancut dalam tu. Spare parts takda dah. Quality barang dulu tak sama sekarang.
the Heater Element is plastic... not gd
Heater element is not plastic