Cool man thanks!! I just got mine today. The combo 2s for $200 🤫. Don't know what to do with it but I'm sure going to do some dumb shhh. I appreciate the tutorial.
Thank you for this wonderful video. Crystal clear instructions. Unfortunately, they didn't send me the MICRO USB TO USB TYPE-C CABLE. (for Lumix GH4). I got so many cables but I didn't get the cable i needed, the one into my camera.
Hello, you are a Genius! thanks for all, but in the case on Bmpcc 4k or 6k, is not necessary use that cable micro usb - type C? I'm asking because I mounted with a SSD... ??? thanks!
Hi Marcel, probably the best tutorial on the 2S. I see you’re using a 5D Mark II in your set up. I’m on the verge of buying the Crane 2S but noticed the 5D mark II was not listed on the camera compatibility list. Is the 5D mark II fully compatible with this gimbal? That’s the camera I would be using. Thanks. Steve
hi Canon 5D Mark II works, but if you attach hdmi cable, your monitor won't show the live feed anymore, but that's more due to the 5D Mark II problem. It's settings like aperture, ISO, etc. you can control
@@Rolyat2 Canon 5D MKII + Zhiyun Crane 2S + cam control thru gimbals buttons = then you'll need a monitor. If: Canon 5D MKII + Zhiyun Crane 2S = no monitor needed. If Canon 5D MKII + Zhiyun Crane 2S + cam control thru gimbals buttons + zhiyun image transmitter = external monitor needed + monitor needs to have hdmi in and out to loop back to the transmitter
Thank you for all your fine video. What are you gona do if you what to use the Vortex mode to film the wheel on a car and the wheel must be in center when spinning 360. On my setup the camera is center to the left of the Crane 2S center and Then it wont spinn Nice the wheel will not be in center of the frame. I Can aidt some whight on the left side to get the camera into center. Do you have a tip??
Marcel, can I use a few seconds of the clip in my review video where you are balancing your crane 2S? I already balanced mine and forgot to record it? I will of course give you credit.
it's basically the same, I unfortunately don't have a bmpcc for demo. I did do one before with the crane 3s though, you can find it in the zhiyun crane 3s official tutorials playlist of mine
hi, the follow focus motor tutorial is still in edit, it'll be uploaded in a week. But the principles are the same as the Crane 3S, feel free to check this one as reference for now: th-cam.com/video/lq3tw3m1oGs/w-d-xo.html
Marcel,, quick question. I have balanced my Crane 2S several times as well as calibrated manually and Autotune and I'm still getting micro jitters. Is that normal with this Gimbal and the footage just needs to be stabilized in post? I have the most up to date firmware also.
Forgot to mention that you have to activate the gimbal with the Zhiyun Play app before you can use it. If you got this gimbal and went somewhere remote without wifi or mobile data to shoot you’d be screwed. You just need to activate the gimbal once but don’t get caught out.
hi Ben, there are two things, if underslung is basically using it in PF mode and holding the gimbal like a flash light, if u want to get very low to the ground u can use inverted mode, turn off your gimbal, flip it down so the handle is above and the camera package and axis (make sure you can still read ZHIYUN normally and not flipped down, so you know it's the right way) and then turn on the gimbal. and it should work. If you're unable to turn it down, because axis are in the way then move them out of the way and rebalance before turning on
Very informative tutorial, but the music was distracting, loud and very annoying. Tutorial would have been much better without the music. Could not continue watching the remainder of video as a result.
Cool man thanks!! I just got mine today. The combo 2s for $200 🤫. Don't know what to do with it but I'm sure going to do some dumb shhh. I appreciate the tutorial.
Just got my zhiyun! Bro you're a life saver!!! This is great video
Thank you for this wonderful video. Crystal clear instructions.
Unfortunately, they didn't send me the MICRO USB TO USB TYPE-C CABLE. (for Lumix GH4).
I got so many cables but I didn't get the cable i needed, the one into my camera.
Excellent tutorial. A clear explanation with well executed imagery to demonstrate the step-by-step assembly. Thank you. Your fellow Crane 2 S user.
thank you
Sory, but the tripod doesn't fit on the crane....it seems like the screw is very tinny to the hole....is there any piece missing? thanks!
Hello, you are a Genius! thanks for all, but in the case on Bmpcc 4k or 6k, is not necessary use that cable micro usb - type C? I'm asking because I mounted with a SSD... ??? thanks!
Hi Marcel, probably the best tutorial on the 2S. I see you’re using a 5D Mark II in your set up. I’m on the verge of buying the Crane 2S but noticed the 5D mark II was not listed on the camera compatibility list. Is the 5D mark II fully compatible with this gimbal? That’s the camera I would be using. Thanks. Steve
hi Canon 5D Mark II works, but if you attach hdmi cable, your monitor won't show the live feed anymore, but that's more due to the 5D Mark II problem. It's settings like aperture, ISO, etc. you can control
So I wouldn’t be able to operate an external monitor and would be restricted to the camera’s live view? Thanks.
@@Rolyat2 Canon 5D MKII + Zhiyun Crane 2S + cam control thru gimbals buttons = then you'll need a monitor. If: Canon 5D MKII + Zhiyun Crane 2S = no monitor needed. If Canon 5D MKII + Zhiyun Crane 2S + cam control thru gimbals buttons + zhiyun image transmitter = external monitor needed + monitor needs to have hdmi in and out to loop back to the transmitter
Is any crane not coming on and all the batteries are charged?
Thank you for all your fine video.
What are you gona do if you what to use the Vortex mode to film the wheel on a car and the wheel must be in center when spinning 360.
On my setup the camera is center to the left of the Crane 2S center and Then it wont spinn Nice the wheel will not be in center of the frame.
I Can aidt some whight on the left side to get the camera into center.
Do you have a tip??
Its is a very good one by one tutorial for the gimbal.
Thank you for this video I just got the Crane S 2 and used this video to help me set it up... Training once again by These Jedi Masters...
Is this compatible with the canon rebel sl2?
So impressive and very nice
Hello sir. I turned on the crane 2s in locked axis and then turned it off. Now it starts shaking when I turn it back on. Its. Brand new crane
Marcel, you are the best :)
I was looking for some time to get a nice tutorial like this!
thank you
Does it work with a Panasonic X1500E? Thanks!
Marcel, can I use a few seconds of the clip in my review video where you are balancing your crane 2S? I already balanced mine and forgot to record it? I will of course give you credit.
sure, no problem and yeah, credit would be much appreciated
Please show hot balance Bmpcc 6k with full cage system
it's basically the same, I unfortunately don't have a bmpcc for demo. I did do one before with the crane 3s though, you can find it in the zhiyun crane 3s official tutorials playlist of mine
Which do you recommend crane2s or rsc2
Thank you very much for this excellent tutorial.
My screen just reads axis lock any help
My 2S came missing the 1 quarter screw for the quick release plate, how does one get there hands on a 1 quarter screw?
Thought mine was missing too until I looked in the box with the charging cables in it. There is a little white bag with the screws.
Hello how do you put the follow focus motor please?
hi, the follow focus motor tutorial is still in edit, it'll be uploaded in a week. But the principles are the same as the Crane 3S, feel free to check this one as reference for now:
th-cam.com/video/lq3tw3m1oGs/w-d-xo.html
Super 🎉
Marcel,, quick question. I have balanced my Crane 2S several times as well as calibrated manually and Autotune and I'm still getting micro jitters. Is that normal with this Gimbal and the footage just needs to be stabilized in post? I have the most up to date firmware also.
Help me plzzz.... How to activate to the phone? Thank youuu
Hi Marcel my Crane 2S are not balance when using the PF mode it's slightly slanted but the other modes are fine can you help me out?
hi, which camera and type of battery are u using and did u attach the lens support
Tripod leg is loosed., how can I fix
Why Sony a7iv camera Not support for recording On. record cut Supported
how to use the focus motor with the zoom motors in the crane 2s?
Forgot to mention that you have to activate the gimbal with the Zhiyun Play app before you can use it. If you got this gimbal and went somewhere remote without wifi or mobile data to shoot you’d be screwed. You just need to activate the gimbal once but don’t get caught out.
Hello I have this gimbal that I use with my bmpcc4k, and I’m struggling to figure out how to get into underslung mode. Do you know how?
hi Ben, there are two things, if underslung is basically using it in PF mode and holding the gimbal like a flash light, if u want to get very low to the ground u can use inverted mode, turn off your gimbal, flip it down so the handle is above and the camera package and axis (make sure you can still read ZHIYUN normally and not flipped down, so you know it's the right way) and then turn on the gimbal. and it should work. If you're unable to turn it down, because axis are in the way then move them out of the way and rebalance before turning on
Marcel Brandel thank you very much, do you know if there is a video out there showing how to do it so I could follow along?
@@benkellyvisuals it's literally in edit right now ^^ it will most likely be uploaded next week tuesday
Marcel Brandel perfect! I’m looking forward to it!
Anyone else have issues with their mounting plate being stuck on the baseplate? No idea how to get it off.
Yeah I am i don’t know how to get it to fit
I am having this problem also. Were you able to get it off? If so, how?
good
Thanks!
TOP
No se conecta con mi sony a6300
Very informative tutorial, but the music was distracting, loud and very annoying. Tutorial would have been much better without the music. Could not continue watching the remainder of video as a result.
The most important tutorial isn't even here. Totally useless gimbal if you can't even properly activate it
god i hate "tutorial" videos that use 5 minutes to get to the point