Kids plz always make sure to secure your vehicle before working on it that jack could fall always put jackstands under your car and lower your jack until it is sitting on the stand itself dont get hurt
There was a case a few days ago, a man got smashed by his car while he was under it doing oil change. He was only using the scissor jack. The brake disc hit his neck. Instant death.
Also, why would you take the tires off for an oil change? and why was he even close to the sides? Most of the time when someone does an oil change they will be in the middle area since that is where the oil pan is. I guess you could just lift one side and do it quick like that so you'll be in there through the side, but that's also the risk of doing it quick/not right...
Its a Wigo po (or any car for that matter), observe the limit of occupants weights including driver as per vehicle capacity (load limits) rin . Maraming components lalo na plastics or not so heavy duty load steels na gamit sa ganyan kaliit na vehicles ang madaling masisira at sobrang mahal kung napapagalitan by parts pero yung iba ay assembly kit talaga original parts. Sa huli tyak gagamit ka ng class AAA na copy eh yari ang buong suspension system mo damay chassis. So, ingat sa mga ilalagay at baka feeling upgrade pero sa huli eh downgrade sa reality. Maraming gumagamit ng Wigo or similar na akala nila o feeling mountain bike dala or trail bike kung i ratrat sa masanang kalsada ... 😢 giba yan po. Nasa gamit at TLC ang itatagal nyan po promise.❤❤❤
@@Pistaspararequinto Why? With the car jacked up you can take the measure for a thicker buffer, so you will have an higher car after the modification.
This do not deserve to be called cushion, but the increase of spring hardness can be calculated this way: count the free spring gap, reduce it with the inserted rubber. Example, 7 free, with 1 rubber. increase of hardness = 7/6 = 16% more hardness 2 rubber = 7/5 = 40% more hardness
They don't increase clearance at all. Not if they're the right size - not even 1/4 inch - and that's perfect. I just wanted a higher spring rate. Now... Under load ... YES... They will increase height. That can also be a good thing if all you can safely do is a 2 inch lift . Just making the springs stiffer will increase dynamic clearance by probably an inch.
I put my motocross on a hitch rack at the back of my car and I see my car really down when I am on the road with. Can I put this buffer on my rear shock for more support when I have my motocross at the back ?
@@off-roadingexplained8417 I have 1 and my car bottoms out. It's a Toyota Camry and I had 300lbs of subs in it. But now I don't and it still bottoms out.
You could try and possibly trim the excess if to long that or use spring risers/boosters or they even make air bags that go inside coil springs. I have same issue boosters worked ok but I swapped springs till I got the ride I wanted.
Does adding a rubber cushion provide spring resonance noise damping? I need that, as getting continuous pitch noise believed to be the springs at about maybe 100 to 200Hz. Very annoying, and I cannot prove it, but garage seems to have removed something, as the noise was not there until after it was serviced. They deny removing anything. Kia Ceed 2016. Think the last owner fitted something. Kia does not seem to know what could have been fitted. Clues appreciated.
Bumili dn ako nito sir for front and rear at ng install din ako nito sir sa likod.. yung s harapan dko pa naiinstall... Plan ko na iinstall yung s harap once ngpaaplit ako ng strut mounting.. para maging proportion pa rin sa spring ratio..since hindi nman cya nkakadagdag sa height.... Parang ang ok dn nung ng install ako sa likod pansin ko yung stability nya when it comes to curves.. d kagaya dati pg mabilis at pa curve ang daaan para g tataob c wigo kc ang lambot at bumabaon ang spring/suspension..
@@josephcadiao5751 mas pulpul ka.. anong maitutulong ng swaybar at strut bar kung malambot ang spring rate mo.. kung iniiwasan mo eh yung rubbing issue at body roll s sobrang lambot ng stock spring... Pulpul!
Sisirain mo lng mazda mo 😂 mag coilover ka at strutbar kung gusto mo ng underchassi upgrade for better handling and grip. Wag mo din kalimutang palitan ang oem tyres
Sir sana ma notice :) Kumusta naman performance after 2 years? Di ba sya nakaka bend ng spring or nakaka sira ng mga bushing? Plano ko rin sana maglagay
akala ko mag ma-magic ka na ulit kev.ganyan pala maglagay ng yan. ginamit mo cable tire ba yan? yong itinali mo.ano tawag pala jan? paano kung uminit di yan matutunaw?nyong itinali mo?
@@colinlewington141 that's the way... Seriously, that's the way to install it :P Don't get me wrong, I do prioritize safety, but sometimes there is nothing wrong with it. Looks sketchy, but it's safer than taking the spring out...
this product is a copy of a 65 year old design by Grayson amongst others used for towing caravans trailers etc Find some innovative product to recent preferably from this century let alone this decade and at least with the original kit you got decent ty-wraps to might actually last longer than the first bump in the road Nice music though ;-))
Never mind the jack stands lads his touque guage is 140hs (hand slaps) not 140nm in a star shape.
That's a German torque wrench. Gutentite
@@catsaregovernmentspies in Ireland you measure torque in size 10 + 20 degrees
Tell your free loader friends to buy a car so you don’t have to drive all of them around
Kids plz always make sure to secure your vehicle before working on it that jack could fall always put jackstands under your car and lower your jack until it is sitting on the stand itself dont get hurt
There was a case a few days ago, a man got smashed by his car while he was under it doing oil change. He was only using the scissor jack. The brake disc hit his neck. Instant death.
This guy wasn't under the car
Also, why would you take the tires off for an oil change? and why was he even close to the sides? Most of the time when someone does an oil change they will be in the middle area since that is where the oil pan is. I guess you could just lift one side and do it quick like that so you'll be in there through the side, but that's also the risk of doing it quick/not right...
@@LilPistachoSome people just comment without think about. A oil change doesnt require to remove the tire 😂
Sometimes it makes it easier to access the oil filter, I've had a vehicle like that..
Its a Wigo po (or any car for that matter), observe the limit of occupants weights including driver as per vehicle capacity (load limits) rin . Maraming components lalo na plastics or not so heavy duty load steels na gamit sa ganyan kaliit na vehicles ang madaling masisira at sobrang mahal kung napapagalitan by parts pero yung iba ay assembly kit talaga original parts. Sa huli tyak gagamit ka ng class AAA na copy eh yari ang buong suspension system mo damay chassis.
So, ingat sa mga ilalagay at baka feeling upgrade pero sa huli eh downgrade sa reality.
Maraming gumagamit ng Wigo or similar na akala nila o feeling mountain bike dala or trail bike kung i ratrat sa masanang kalsada ... 😢 giba yan po.
Nasa gamit at TLC ang itatagal nyan po promise.❤❤❤
IT WOULD HELP IF YOU TOLD US HOW IT WORKED AND WHAT PRPBLEM IT SOLVED
I just got a set on Amazon and they are outstanding in performance 👏
What performance did you get ? Your car handles better in curves?
When you measure the gap, you don't jack up the car, do you? There are so many versions.
No you dont jack up the car !
@@Pistaspararequinto Why? With the car jacked up you can take the measure for a thicker buffer, so you will have an higher car after the modification.
Dramatic improvements in real world ground clearance with no change to static clearance. Perfect ! Just make sure you get the right size!
How to measure sizes??
Is anyone going to mention the sketchy scissor Jack with no axle stands, nor the wheel under the car
Why would you, its none of your business
Is the face mask mandatory? Asking for a friend
no jab necessary
This do not deserve to be called cushion, but the increase of spring hardness can be calculated this way: count the free spring gap, reduce it with the inserted rubber. Example, 7 free, with 1 rubber.
increase of hardness = 7/6 = 16% more hardness
2 rubber = 7/5 = 40% more hardness
Hello .. was wondering .. what size did you get ?.. medium?
Pls when taken the the spring gap measurement, would you jack up the car or allow it flat on the ground.
Bro if the jack fails and your fingers get caught between the buffer and spring under the weight of the car confirm pedih teruk
the mask outside while alone baffles me
At his own cut too smh sone people can’t be too careful I guess 🙄
Still waiting for the review I guess
These mainly cushion the ride, get the rubber shox block boosters to increase height.
They don't increase clearance at all. Not if they're the right size - not even 1/4 inch - and that's perfect. I just wanted a higher spring rate. Now... Under load ... YES... They will increase height. That can also be a good thing if all you can safely do is a 2 inch lift . Just making the springs stiffer will increase dynamic clearance by probably an inch.
Please use axle stands, or something to save you from that car crushing you.
Lovely video, Ya got a like 👍
How would he be crushed, he wasn't under the car
I put my motocross on a hitch rack at the back of my car and I see my car really down when I am on the road with.
Can I put this buffer on my rear shock for more support when I have my motocross at the back ?
2011 petrol dezire ko kaunsa size lagega
CNG nahi lagaya hai piche 3/4 log baithte hai toh gadi speed breaker ya bade khadde mea niche takra jati hai
what was the size which you bought ?
How long do these usually last?
its still working til now bro
Sir after nyo mag lagay nyan nag ka langitngit ba?
Do you have a link for product ✌️🇨🇦
Totally unsafe to work without jack stands under the car ..worse! A scissor jack !
Couldn't agree more, I would rather stuff up my repair work than die under a car.
car weighs 150 pounds. you can bench press it off yourself. 💪
Don’t worry he has a mask on
Wearing a mask outside says all you need to know about the common sense here lol none!
@@TheChosen1uan first you need to lift from the face ...
Can you possibly fit 3 on a rear spring?
You wouldn't want to. 1 is plenty stuff.
@@off-roadingexplained8417 I have 1 and my car bottoms out. It's a Toyota Camry and I had 300lbs of subs in it. But now I don't and it still bottoms out.
You could try and possibly trim the excess if to long that or use spring risers/boosters or they even make air bags that go inside coil springs. I have same issue boosters worked ok but I swapped springs till I got the ride I wanted.
Kamusta naman ung talbog? Hnd na ba basag tulad ng dati?
for additional support lang to bro, para di masyado sumayad hihi
How can i know the size will fit my car please
when you measure the spring the wheel is on the ground or the vehicle must be raised
What about spring breakage ?
Was it really necessary to remove the wheel
Yes for easier installation or you can have it installed to the nearest servicing center in your area
Does adding a rubber cushion provide spring resonance noise damping? I need that, as getting continuous pitch noise believed to be the springs at about maybe 100 to 200Hz. Very annoying, and I cannot prove it, but garage seems to have removed something, as the noise was not there until after it was serviced. They deny removing anything. Kia Ceed 2016. Think the last owner fitted something. Kia does not seem to know what could have been fitted. Clues appreciated.
stop trippin.... springs dont resonate at audible levels.... foam your inner panels its just road noise...
Just grease the top of the spring mounts, the side that touches the body so no friction.
Dude... How to measure this one? Lift the car or could be on the floor?
on the ground
at least throw the tire under the drum in case the jack falls 🤔
Where to buy???
Should I go for this for Jimny (JB74) with Xtreme-J X03 16" Wheels?
Not recommended by many experts. May have safety issues. Enjoy your Ride be safe.
Sir medyu offset ba gulong mo? D naba sa sayad gulong mo sa fender? At d ba yan matagtag sa ride?
Any new update on this?
Will this lift the car a little bit?
I am also curious if this will lift the car
@@DanielHernandez-tt3tx
It won't do a fcuk.
2,500 pounds of car isn't lifted by these plastic cushions
it only lifts around 10mm but it prevents car to lean down when loaded. lets say you'll get %20 more ground clearance then before when loaded.
Wigo po ba to?
yes bro
Thank you so much am searching for it ❤
Safety first when working under a car, even in banana land.
Wasn't under the car
Hi Dear impressive. What material is used ?
Thank you bro 🙏
Please , Can i put the buffer to the Front and rear tires ??? Or only on the font tires or back tires ? And why ?
Goes on either, just get the right size. I did all 4 corners.
@@customer7575 what do you think of your investment? would you recommend it? also what type of vehicle did u do? car truck suv?
Does your car have springs front and rear?
@@customer7575ok how do you go about choosing the right size?
Bumili dn ako nito sir for front and rear at ng install din ako nito sir sa likod.. yung s harapan dko pa naiinstall... Plan ko na iinstall yung s harap once ngpaaplit ako ng strut mounting.. para maging proportion pa rin sa spring ratio..since hindi nman cya nkakadagdag sa height.... Parang ang ok dn nung ng install ako sa likod pansin ko yung stability nya when it comes to curves.. d kagaya dati pg mabilis at pa curve ang daaan para g tataob c wigo kc ang lambot at bumabaon ang spring/suspension..
Sir sa ka po naka bili nung sa iyo? Parihas lng b anang size sa hundai eon? Salalamat po.
@@marialaniebregoli7902 sa shoppee po ako bumili.. sesrch nyo po fermi shop
Ano function nito pag may lubak?
Kung gusto nyo ng better handling maglagay kayo swaybar at strut hindi ito mga pulpol
@@josephcadiao5751 mas pulpul ka.. anong maitutulong ng swaybar at strut bar kung malambot ang spring rate mo.. kung iniiwasan mo eh yung rubbing issue at body roll s sobrang lambot ng stock spring... Pulpul!
Will this stop a jumpy rear ?
New shock absorbers or strut assembly will
@@tylermartin2631 what if I have coilovers lol
That’s why I said strut assembly look it up
@@tylermartin2631 bet imma look into it
@@tylermartin2631 so the stock strut assembly ?
That jack is only for emergencys only. I seen those collapse on people
Where can I purchase this???
eBay or Amazon
how to order this product?
It's TPU , PU or RUBBER ?
Purpose of rubber cusion ?can u explain?
😒😒😒 to reduce suspension travel , soft suspension have this problem.
Kamusta overall review sir ok ba sa driving? Nabawasan ba ung tagtag ni wigo?
Goodpm sir any idea for mazda 3 size of cushion?
Sisirain mo lng mazda mo 😂 mag coilover ka at strutbar kung gusto mo ng underchassi upgrade for better handling and grip. Wag mo din kalimutang palitan ang oem tyres
Will it reduce vibration from road jerks and will it work for stiff suspension?
Sir sana ma notice :) Kumusta naman performance after 2 years? Di ba sya nakaka bend ng spring or nakaka sira ng mga bushing? Plano ko rin sana maglagay
Nakakasira yan wag ka bumili
Is it can use in our Bike ?
No fool
Brain damage.
Thank you Idol Ken, Nice one...
Please the link of the Store
ano feel ng ride nyan? lumambot ba or matagtag
One bump or pothole and those zip ties will leave the chat. One hard pothole and the whole thing is coming back out. This is stupid.
I’m impressed. Those were some heffers you loaded up in the back seat too and barely moved.
Do they actually work like can u feel the dif when u drive
6:00
Pag sinukat sir yung gap kailangan ba nakajack?
no need na po.. your car must be on a flat ground when measuring the Spring Gap
No review given?
How we get the right measurements??
when measuring the spring gap, the car must be on a flat ground
i like those cable ties lol
Hindi ba matagtag sa humps or rumble strips?
May additional support sa spring mo bro.. para d masyado sumayad
After mo nilagyan nito boss, hinda na sya sumayad? Or may nilagay ka pa? Pina fender roll mo rin ba?
cushion lang talaga boss, no fender roll,
tinry ko ito para d masyado sumayad pag may karga.. hehe
tumaas ba ride height?? or literal na support lang siya hoping for your response
same height bro, but atleast d sya masyado sasayad compare kung wlang cushion
They also sell rubber blocks that increase height.
Price
Air Lift bags 🎒 would be much better in the rear.
Where’s the review?
Please note this wil damage your suspension
Nakaka tulong talaga para di sumayad?
Why would I want this?
akala ko mag ma-magic ka na ulit kev.ganyan pala maglagay ng yan.
ginamit mo cable tire ba yan? yong itinali mo.ano tawag pala jan? paano kung uminit di yan matutunaw?nyong itinali mo?
Wala masyadong magicShows ngayun kaibigan kasi bawal ang mga gatherings.. hehe
Shock absorber rebuild
sir ilang centimeter yung sayo?
Hi想了解这是什么作用？
不让弹簧压到底，载重物时候不卡底，走烂路会比较安静，但前提是在低速行驶是安全，高速行驶就会因为弹簧压不下去造成轮不咬地失控,简单点就是“装了别驾快”
Bom dia onde que eu compro
Where is review
Where the heck do you buy them?????? What good are these videos if you can't find the product!!!!!!!!
eBay or Amazon, they can come up under different names, coil boosters, spring spacers, suspension rubbers ect.
Autozone or O'Reillys should have some
They r on Amazon
Shopee
Bruh just look up the name on the box he clearly shows the name on the box
anong size kaya pag honda city boss?
Wearing a face diaper outside, why ?
Stop whining. He didn't even go under a car. It is accessible from outside
Had his arms in amongst the springs though!
@@colinlewington141 that's the way...
Seriously, that's the way to install it :P
Don't get me wrong, I do prioritize safety, but sometimes there is nothing wrong with it.
Looks sketchy, but it's safer than taking the spring out...
Anu size?
size C po
@@KevMichael paps san ka nakabili
Nice, but you dont know how to rotate a jack😅, you put the spanner the other way round.
Bro you are using the weakest jack on earth to protect your life... wow...
How would his life be impacted if the car fell since he was NOT under it.
Hm
Boss San nyo Po binili yn cushion
Boss, ano po size nang gulong nyo?
That was not in any way shape or form, a review.
well ..there is no need for cable tie.....this buffer is plug and play..😅
Pwde po pa service
Size ng cushion boss?
We find always a point to criticize
Next time use jack stands. This way 99 percent of the people in the comments don't have to remind you just in case know one noticed.
Well done
this product is a copy of a 65 year old design by Grayson amongst others
used for towing caravans trailers etc
Find some innovative product to recent preferably from this century let alone this decade
and at least with the original kit you got decent ty-wraps to might actually last longer than the first bump in the road
Nice music though ;-))