How to Build a Christmas Light Show! 2021 Behind the Scenes - Pixel Mega Tree
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- Please like, subscribe and comment so we can bring you more videos of our display.
XLights Sequencing Software:
xlights.org
Showstopper Sequences:
showstoppersequences-com.3dca...
Magical Light Shows:
magicallightshows.com
Overkill Metal Products:
/ overkillmetals
Boscoyo Studios
Mega Tree Strips: boscoyostudio.com/product/meg...
Star:
boscoyostudio.com/product/chr...
Mattos Designs:
mattosdesigns.com/collections...
Kulp Lights:
kulplights.com/product/k8-b/
Falcon Smart Receivers & Expansion Boards:
www.wiredwatts.com/controllers
JBoards Breakout Boards:
jboards.ecwid.com
Wizard of Wire Breakout Board Option:
www.wizardofwire.com/product/...
Pixels, Extensions, & F-amps:
www.wallyslights.com
Ratchet Straps, Ground Anchors, Zip Ties,
Guy Wire Ring, Bungee Ball Straps:
www.amazon.com
Tree Mast
1,1/4" Galvanized Pipe:
www.lowes.com/pd/LDR-1-1-4-in...
1,1/4" Galvanized Flange:
www.lowes.com/pd/Mueller-Prol...
1,1/4" - 3/4" Reducer:
www.lowes.com/pd/Mueller-Prol...
3/4" Black Iron Pipe for Topper ONLY:
www.lowes.com/pd/Mueller-Prol...
Music Credit:
Morning Routine by Ghostrifter Official | / ghostrifter-official
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY-SA 3.0
creativecommons.org/licenses/...
Positive Hip-Hop by MaxKoMusic | maxkomusic.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)
creativecommons.org/licenses/...
#behindthescenes
#christmaslights
#christmaslightshow
#pixels
#megatree
![[LIVE] : ONE ลุมพินี 72 วันนี้!! คู่เอก "ก้องศึก vs โจอาคิม"](http://i.ytimg.com/vi/hT1EOSsRPac/mqdefault.jpg)
Would it be stronger to put guy eye-bolts into the top steel plate instead of adding those extra guy tabs on the 10-ft mast just below the steel plate?
The connection of the topper to the main pole is a weak point: A threaded coupling. I didn’t want to add stress to that part of the design.
Nice presentation. Consider using fewer ports with a little power injection. I used only 6 ports of my kulp k-8 to drive 6 lines of 750 pixels each, 5v, 125 pixels per strand. I did use 2 350w meanwells, but like your single hp solution.
th-cam.com/video/x9Bmo6hUG4g/w-d-xo.html
Nice detailed video. I really like the power supply setup. Do you happen to have a link to the jboards breakout? Thanks!
There is a link to the JBoards website in the description. However, this particular board he is not currently making and not sure if this will change in the future. I’ve added a second option from a different vendor that I also use and works well.
Thanks for watching and glad you liked it. More to come.
Can someone help me get started? Seriously, I have no clue what all this is
Join the “Official XLights Support Group” on Facebook. You will find people in your area who will be more than happy to assist.
What are the blue cables leading to the outside of the box?
Cat 6 cables sending data from computer to controllers.
@@StevePetruccidirectly to your computer?
Great video can you explain how you wired it xlights to know? To falcon smart receiver to pixels? Regulated or resistor
My home computer talked to the two controllers wirelessly. The Beagle Bones on each controller held the data on their sd cards. During the show the controllers also spoke wirelessly to each other. All of my smart receivers were connected to the controllers via cat5 cables. All of my pixels are 12v resistor. Hope this helps. Thanks for watching.
Nice Video!!! Was wondering whom you bought your singing trees from?
EFL designs. My next video (Wall Props) coming out this week will focus on them and the entire wall. Great products! Thanks for watching.
So one port is controlling those 3 strings?
150 pixels per port (12v). Up 75, down 75. Using three sets of 50 to create the 150 count.
@@StevePetrucci This is great. I was planning on using 24 ports for 24 strings of 75 pixels.
Hi... I will to someone that teach me how to do this, serious people please