TONE RMFQ Quick Ratchet Box Wrench Ordinary Plus α!
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- TONE RMFQ
Oscillating quick ratchet box wrench
Ordinary plus α!
Tone's board ratchet
Tone's typical gimmick
very interesting and easy to use
If KTC is “above average”
Tone is “normal plus α”
Tone and KTC
Something like company policy.
It may well represent
KTC's flex structure is excellent
Smooth and just the right amount of resistance is the best
Tone's step structure is highly practical.
Even if it becomes a little loose after use
The feeling of use does not change much.
I think this is also a way to keep the price down.
Tone's step structure
I personally like it very much
Once you get used to it
This ticking feeling
I'm starting to feel comfortable (lol)
The best of rock and free
This is a point typical of Tone.
Speaking of Tone's board ratchet
ratchet spanner
Among the many ratchet spanners
Ease of use ranks first and second
From Facom ratchet spanner
Hold the bolts and nuts firmly
there is certainty
I checked with Tone-san.
It seems that final tightening is OK.
Width on two sides is 12mm, so it's only this much.
I couldn't try it
I think it's strong enough
By the way, KTC...
All I can say is that it's amazing
The nail that hooks it is a wrench.
Available up to full thickness
I can only describe it shallowly
For thin bolts and nuts, etc.
can accommodate
I don't see it much elsewhere
This is Tone's good point.
There is one difficulty
The tip cannot be turned
Facom, combination wrench, etc.
I use it interchangeably
When there are restrictions on luggage
As an extra tool
There are many appearances
1/4 set plus α
14,17,19
Just add these three
The range of defense is very wide.
Tone-san set plus α
Box wrench +
spanner + flex
Add 8mm to 1/2 set
This is a combination that often appears.
Mainly Tone's plate lache
Often combined
Plate ratchet adapter and bit socket
Pocket a few pieces that you think you'll use
I often feel that
etc
It was in each situation
There are combinations
Just thinking about the combination
It will be fun
Tone's board lache
It is a tool that comes in many uses.
has sufficient strength
fun to use
It is a tool typical of Tone.
And always will be
I think you'll be a good companion.
#Tools #Wrench #GearWrench #TONE
ご紹介ありがとうございます!TONEさん昔余り興味無かったけど今思えばバカだと気付きました😂痒いところに手が届く良い工具有りますよね!
トネさんほんとに良い製品をたくさん提供してくれています。
良い意味で期待以上の性能を発揮してくれ事が多く、「気が付かなくてごめんね〜〜」みたいなことが結構あります~(笑)~
Excellent video - I have the KTC model in 10mm and it works well, but haven’t tried the Tone RMFQ type yet. I think I will consider getting a set of them after seeing this video demonstration - thanks.
Thank you for always watching the video.
KTC is usually amazing
TONE can be used normally and is interesting
Even if you already have a KTC product
I think there will be a turn for TONE
No.1 and No.2 makers seem to live well.
please refer.
仕事で足回りとかで無茶な使い方してるけど全く壊れないし秀逸
コメントありがとうございます。
コスパ最高!目立たないけど名機だと思います。
TONE(トネ)サンお気に入りです。
Which is more famous brand in Japan? When it comes to ratcheting wrenches/spanners, Tone or KTC?
Foreign-made tools are often seen at Japanese workplaces as well.
Even for Japanese manufacturers, there are many manufacturer sites and store sites that are mainly produced in Taiwan or China.
Manufacturers that are often seen mainly in Japan include:
A Japanese tool manufacturer that can often be seen at car and motorcycle repair shops.
KTC (Kyoto Machinery Tools), TONE, Ko-ken.
A Japanese tool manufacturer that can often be found at construction sites and home centers.
TOP (Top Industry), ASH (Asahi Metal Industry), Lobtex (LOBSTER).
please refer.
@@mono-story Thank you very much for the insight. I appreciate it. Happy New Year!
Thank you for writing so many comments this year.
Please come visit us again next year.
I hope 2024 will be a good year.
え、まさかの本締めOKなんですか? 驚
ふるさと納税でTONEの工具買えるって聞いて、昨日それのセットと迷ったあげく、この前コーケンのセット買ったばかりなのに、又無難なインパクトソケットセット注文してしまいました~。泣
トネさんとのメールのやり取りを改めて確認しました。どちら側でも本締めOKだそうです。
固着したネジを緩める時や、打撃を加えたりしたさいは、許容範囲を越えてしまう可能性が高いので、各ネジの標準的な締め付けトルクの範囲内で使用してください。とのことでした。
個人的な感じでは、ktcさんの半分くらい。
12mm
メガネ側で40ニュートンくらい、
スパナ側で25ニュートンくらいくらいまでで使うのが安全な感じです。
参考にしてください。
情報ありがとうございます。m(_ _)m
最近のTONEさんのサテンメッキ仕上げの工具って台湾製なのでしょうかね?
台湾の工具って個体差がなく日本の工具みたいに研磨作業での歪なバラツキがなくて
どういう製法なのか気になりますね~。
本当に最近の台湾の工業製品の品質は凄いと思います。
日本製の伝統の製法にこだわった強靭な素材の信頼感も捨てがたいですが。
戯言でした~。
手元にある現行品のコンビレンチには「JAPN」の刻印があります。
おそらくですが日本で製造していると思います。
ビデオで紹介したような板ラチェのことを「ギアレンチ(GEARWRENCH)」とうもいいます。
ギアレンチ(GEARWRENCH)は元々は台湾のメーカーで、そのためか、このスタイルの板ラチェの多くが台湾製造になっていると聞いています。
トネさんとKTCさんの板ラチェ(ギアレンチ(GEARWRENCH))が台湾製である可能性は高いと思います。
台湾の製造技術のすさまじい成長ぶりには驚くばかりです。
しっかり掴んでくれるけどバネが弱いのか知らんけどすぐ潰れた
スパナ側が壊れましたか?TONEさんに直接確認したのですが、どちら側でも対応するサイズの標準的な本締めには耐えられるように作られているそうです。
どの用に壊れたのか興味があります。
もし良かったっら教えてください。
モンキーの名称知りたいです。
映像で写っているラチェットモンキーはDickies(ディッキーズ、ファクトリーギア) ラチェットモンキーレンチ 150㎜です