Thank you for watching our video. We know your car is looking fresh again. Where to buy: bit.ly/300CFrontBumper If you need to buy any other high quality painted parts or need to chat with us, Visit us at : www.revemoto.com
@@charleyfelix4921 Hello! We are not too sure about he srt8 model. I know that the hood and fenders are 2011-2020 range. The srt8 fenders only show from 2012-2014 only. I would definitely consult the Chrysler forums. It looks as though everything is the same shape but a different style. Triple check those forums, the usually have someone who has already attempted the conversion. Take care!
Hello! No, we didn't have to do that but that is the "best practice." If you feel safer that way, go for it. We weren't working on anything electrical. We just unplugged the harness which isn't too bad. Thank you for watching!
Hello! I don't believe it does. The model range is only from 05-10 for the fenders and the hood, which means the bumper wont fit. Check out any Chrysler 300 forums to see if some has done it. Thanks for watching!
The lower pieces visible from the front? Fog light covers ... they are different depending on features your car might have. The big underneath piece? Splash guard is what I saw him call it.
Had to do a search. In each case it said “fog light cover” 1) There’s the full piece (as in the video, without fog lights) 2) There’s with lights (an opening for the lights) 3) The right side has 2 openings if you have adaptive cruise control and fog lights
Hola! Te refieres a 12:00 en las esquinas? Eso son los soportes de parachoques/bomper. Los soportes sujetan el parachoque/bomper. Gracias por la pregunta.
Quick Question: Is there anyway for me to see the vin number on the bumper cover without actually removing the entire thing? I think the auto body shop fixed my damage one inside of replacing it. I need to see if the number is the same as my vin..
Hi Tiffany! Sorry to hear about your situation but I don't thinks so. You would have to completely remove the bumper. If they replaced it, they should have a record of the receipt from the dealership or their parts vendor. If this happened recently, they should also have the old bumper in the trash somewhere. Depending on the damage, I would inspect the area and see if there are signs of repair. Normally, you would only find that on the back of the bumper by removing it. You can also ask another body shop to take a look for you. Normally, a shop would just replace the part because it's more cost effective and less labor/time. Good luck!
Of course we can. That part is referred to as front "bumper rebar" or "reinforcement." As Cypress already mentioned, it's the real bumper. Feel free to visit our website www.revemoto.com/
We always recommend checking out the Chrysler 300 forums. The fender and hood are the same parts and the headlights look the same shape. There is a good chance that it does. The grilles and fog light bezels are completely different though. Please do your research before you make the purchase. Take care!
Hi. If you are referring to the the bolts for the bumper retainer or bumper bracket, those were size 10mm bolts. For the bottom of the bumper, they were smaller size 7mm (I think) bolts. Thank you for watching!
Hello Douglas, sorry for the late response. It's not needed if the bracket isn't broken. If I recall correctly, the driver side bracket was loose due to a broken clip that attaches to the frame. The passenger side had a tab broken so the bumper didn't clip on correctly. It can be standard for some shops, because its just easier to change them instead of finding out you need to buy them.
This guy taking the front bumper off doesn't say what he's doing what is encountering Chris perry, I mean it just visually taking it apart with no instructions what he's doing what kind of destruction video is this where he's not talking what he's doing ...
Thank you for watching our video. We know your car is looking fresh again.
Where to buy: bit.ly/300CFrontBumper
If you need to buy any other high quality painted parts or need to chat with us,
Visit us at : www.revemoto.com
Amazing video. Doing this feels so much more achievable now.
Thank you! Make sure to subscribe - we’re always sharing new videos to make your DIY projects easier.
Thank You for refreshing a retired auto tech about removal/replacement of the prima facia. AAA Plus !!!!
Thank you! It means a lot coming from an experienced tech. Take care.
Video is pure gold!! Thank you!!!
Glad it was helpful!
Hey man, if i got a 2012 300 can i replace the bumber with a 2015+ 300 bumper?
Srt8 type
@@charleyfelix4921 Hello! We are not too sure about he srt8 model. I know that the hood and fenders are 2011-2020 range. The srt8 fenders only show from 2012-2014 only. I would definitely consult the Chrysler forums. It looks as though everything is the same shape but a different style. Triple check those forums, the usually have someone who has already attempted the conversion. Take care!
Could i put this type of bumper on a 2015 300 Model ? These bumpers are too clean 😂
Did you have to disconnect the battery?
Hello! No, we didn't have to do that but that is the "best practice." If you feel safer that way, go for it. We weren't working on anything electrical. We just unplugged the harness which isn't too bad. Thank you for watching!
What size are the plastic pins??
Wonder if this bumper would fit on the previous gen.
Hello! I don't believe it does. The model range is only from 05-10 for the fenders and the hood, which means the bumper wont fit. Check out any Chrysler 300 forums to see if some has done it. Thanks for watching!
What are those black plastic call the one you took of the cover panel? The bottom one? The one you called accessories plz
Hey there - yes for sure. Could you specify which part in the video, such as the time the piece is shown?
The lower pieces visible from the front?
Fog light covers ... they are different depending on features your car might have.
The big underneath piece?
Splash guard is what I saw him call it.
Had to do a search. In each case it said “fog light cover”
1) There’s the full piece (as in the video, without fog lights)
2) There’s with lights (an opening for the lights)
3) The right side has 2 openings if you have adaptive cruise control and fog lights
Cómo se llama el cuadrito que le cambio en las dos esquinas de la unión en la defensa ??
Hola! Te refieres a 12:00 en las esquinas? Eso son los
soportes de parachoques/bomper. Los soportes sujetan el parachoque/bomper. Gracias por la pregunta.
Muchas gracias ✌🏼
@@KushStudioBeatz De nada!
@@KushStudioBeatzcambiaste esos soportes amigo? Y de ser así qué medida de tornillos utilizaste?
For the side brackets that he replacef is that also a 10mm bolt?
Hello and I believe so. American cars tend to have different size bolts, but it should be a 10mm or 12mm. Thank you for v watching.
Quick Question: Is there anyway for me to see the vin number on the bumper cover without actually removing the entire thing? I think the auto body shop fixed my damage one inside of replacing it. I need to see if the number is the same as my vin..
Hi Tiffany! Sorry to hear about your situation but I don't thinks so. You would have to completely remove the bumper. If they replaced it, they should have a record of the receipt from the dealership or their parts vendor. If this happened recently, they should also have the old bumper in the trash somewhere. Depending on the damage, I would inspect the area and see if there are signs of repair. Normally, you would only find that on the back of the bumper by removing it. You can also ask another body shop to take a look for you. Normally, a shop would just replace the part because it's more cost effective and less labor/time. Good luck!
Una pregunta tengo el Chrysler’s 300 2014 y no entiendo porque mi tapa de encima no cierra bien ?
Hola. Podría ser que el pestillo del capó o el cable del capó estén defectuosos.
I got into an accident and I bent that bar right behind the bumper can you tell me what that is called please
That's the true bumper, if that is the only part bent it can be replaced as part of the front crash structure I believe.
Of course we can. That part is referred to as front "bumper rebar" or "reinforcement." As Cypress already mentioned, it's the real bumper. Feel free to visit our website www.revemoto.com/
Can you put 2016 front on that 300 ???
We always recommend checking out the Chrysler 300 forums. The fender and hood are the same parts and the headlights look the same shape. There is a good chance that it does. The grilles and fog light bezels are completely different though. Please do your research before you make the purchase. Take care!
What were the type of bolts that we're screwed into the new Front Bumper Clips? Currently trying to Replace new Bumper cover
Hi. If you are referring to the the bolts for the bumper retainer or bumper bracket, those were size 10mm bolts. For the bottom of the bumper, they were smaller size 7mm (I think) bolts. Thank you for watching!
Where are you located?
Hello! We are located in Houston, TX. We also ship across the US, so please visit us at www.revemoto.com
Do you know if a ballast is bad if the light doesn’t turn with the steering wheel
So why did you replace the side brackets just before reinstalling the cover? Were they broken of is this a standard practice for some reason?
Hello Douglas, sorry for the late response. It's not needed if the bracket isn't broken. If I recall correctly, the driver side bracket was loose due to a broken clip that attaches to the frame. The passenger side had a tab broken so the bumper didn't clip on correctly. It can be standard for some shops, because its just easier to change them instead of finding out you need to buy them.
What is the part # for this bumper?
Hello. Follow the this link; bit.ly/300CFrontBumper and scroll down to find the part number. It should be there. Thanks for watching!
This guy taking the front bumper off doesn't say what he's doing what is encountering Chris perry, I mean it just visually taking it apart with no instructions what he's doing what kind of destruction video is this where he's not talking what he's doing
...