2017-19 Toyota Highlander LED Sequential Turn Signal Lamps. Toyota Highlander Switchback lamps howto
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2020
- #ledturnlamps #sequentiallights #ToyotaHighlander
Installing LED sequential turn signal lamps. Adding LED daytime running lamps. If you guys find this video helpful please hit that like button & don’t forget to Subscribe!
Product Links:
LED Lamps: amzn.to/3igwjrh
T-taps: amzn.to/3jUXwQO
Add-a-Fuse: amzn.to/35hhy41
Wire Pliers: amzn.to/3bH2YDV
Please Follow Me On:
Instagram: / trailblazerfilms1
Facebook: m. Trailblazer-Fi...
For Sponsorship, product reviews & collaboration you can email me at trailblazerfilms1@gmail.com
DISCLAIMER: Links included in the description might be affiliated links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting Trailblazer Films! So I can continue to provide you guys with excellent content! - ยานยนต์และพาหนะ
Great job again! For those of us in cold climates that have to deal with road salt, I would suggest actually cutting the turn signal wire, and splicing in with weather proof heat shrink tubing. Also, take the time to drill a small hole in the side of the fusebox housing, pass the wire through, and silicone (better yet, get a rubber grommet) around the wire. I think I'll be adding these to the wife's highlander using your link! PSA, be very careful drilling into the plastic housing, you don't want to go too far or you may create a circuit and blow yourself up :)
Thanks for all those great tips! I definitely agree doing this especially in colder climates.
Thanks for the video tutorial, I installed mine today with no issues.
Nice! Thanks for watching & the support!
This is awesome, thanks for the video tutorial, I don’t have to remove the bumper now. 👍🏻👍🏻
Your welcome! Thanks for watching!
Thanks for this step by step process tutorial. As a starter, I think I can install one for mine too.
Awesome let me know if you run into any issues.
I like the highlander at its height, looks fabulous
Appreciate it, I do also it rides pretty good also
Your vids are so helpful!!
Thanks!
Wow!! Driving of this vehicle will be very interesting
Looks so much better. I also have the same turn signal lamps for my 2018 highlander ;)
Thanks! yeah I love they way it looks. 👍
Good job omg they look awesome love it great video 👍
Thanks! 👊🏼
New Microphone works good. / Great amount of detail on the install 👍
🤙🏼
Just did my 2017 highlander, took me about 4 hours (I always take my time) only one little mistake fixed in seconds. Now it looks way better and better drl than stock. My next goal is the wheel spacers since I already did the front bumper lip. All from your tutorials. Thanks man.
That’s awesome to hear man!! Glad these videos are helpful. 👊🏼
Any body has a problem with LED drl randomly turning on
@@emada3568 i just installed my lights and i have the same issue that to many people have with the random turning on, any body have a solution ? i have a 2019 highlander XLE, Thanks
i just did my 2019 highlander XLE, and i have the problem with random turning on, any solution for this? thanks.
I actually noticed sometimes they turn on when the car is off (which doesn't bother too much) However, it has never drained the battery and they still look and function amazingly.
thanks for the video!! just ordered a set! lol
Cool let me know how they turn out for you
Wow very good job dude. I just got a 2019 highlander xle yesterday. I'll be installing this asap. Hopefully, i don't mess it up 😁
Haha well let me know if you run into any problems I’ll try to help! Thanks for watching
@@JJBanuelos Wow u just cool all round. Happily sub'd to ur channel.
Looks Great!! Love your 3rd gen. I ended up getting a 2020 Highlander, so I'm anxiously awaiting for some aftermarket tidbits like the rear led fog lights.
how do u liek 2020
@@randomrazr I love it so far. I got an XLE Hybrid and am pretty happy with it.
Great job with the installation video. Very cool add on. My only gripe is that I don’t like how the kit blocks some of the fog light. I wish the kit made it so it didn’t block part of the fog light. Otherwise cool upgrade.
Thanks for this amazing video very helpful I might need some assistance when installing mine
Of course let me know if you do. 👍🏻
@@JJBanuelos I love the way the front looks what did you do to it
Hey brother thank you so much
I’m done with my Highlander today front and back brother ❤️
Awesome glad these video could help.
@@JJBanuelos ❤️
great job
Thanks
Yo car look awesome
I very love this car ❤️
Thanks man!
I like your video which I installed the drl on the highlander about a year now and some people did have the same issue with the lights come on stay on for about 3min. Did you figure out what fuse you tap in? I installed it the way you did it the first time.
What fuse did you remove and tap into with the new? What is the head light fuse?
Damn nice video
Thanks bro! Like your vlogz!
Great video,
I just did mine however the headlights stopped working, not sure what happened there. Any idea what could be the issue?
Also what Amp did you use for both fuses? I saw 1 10amp what is the second one?
just did on my 2019 highlander XLE and i love that lights, but i have the problem that to many people have with random turning on, any solution for this ? thank you so much for making a good video.
Nice...wish you were closer so I could hire you to help me with my Highlander...in CA
Yeah that’s a bit to far for me. Should be easy if you follow the video.
Hi my highlander is 2017 Le model. This model doesn't have daytime running light. Is this ok to fit my model? How this day time light working on this fog light? I mean headlight switch on to automatic mode?
Thank you sir!! I’ve been waiting for this!!
Your welcome hope it helps with the install! Thanks for watching.
Trailblazer Films what’s the reason of the drl’s staying on, even after turning off the engine?
@@dyeypi15 depending on the module you decide to tap into some stay on awake a little longer than others.
Trailblazer Films it stays like when i wake in the morning, still on, i followed the way you tap on the video. Do u think there’s a shortage? Thanks in advance
@@dyeypi15 I am glad I am not the only one experiencing this issue. Mine just started last night when I happened to take my trash out to my driveway. I noticed my drl were on, I checked all the wiring and they were all good. I will have to retraced everything this weekend and see what’s going on. I unplugged it from the fuse box for now so it won’t drain my battery. I will keep you posted on what I find out. In the meantime, what did you do to solve your issue?
Hi, what’s the fuse number you use for this installation?
How much light did you lose from the fog lights? I noticed it cuts off a good bit of them.
Do they have something to that effect for the Toyota Highlander 2013 limited? I saw one kind like that, but the guy lives in Russia and I am in U.S (Texas).
What set of headlights do you have? I like the led lights that line the bottom.
I am very interest in adding these lights to my 2019 highlander however its an Hybrid LE and it does not have fog lights at all. I hear its pre wired and I need to switch out my Turn Signal switch with the one with the fog light switch. Do you know if this is accurate?
I just installed one where instead of having just red and black wires for the power harness, it also has a white one. Any idea what the white one is for and where i can hook it up to? Coz i left it out. The lights started working but after two days, the lights started looking blue-ish instead of bright led white. Any ideas as to why?
Hi J J. Not sure if you still check your comments as this video is a couple of years old. But if you do, I have a question. I got the sequential fog lights like yours. Different though. Each fog lights has a yellow cable for signal connect plus a connection to a gizmo. But instead of two lines, power & ground; mine has three! Black, White and Res. Black is Ground. Both White and Red when connected individually with the ground, they have white and blue lights! How do I connect this? Am puzzled. Which goes to the fuse box, and where does the remaining wire be connected? Thank you. Ezzy
Is your Toyota a limited or XLE and is your fog lights aftermarket?
I just completed my install and light are always orange, and won’t flash when locking and unlocking. After ignition is on it will work, if I turn off all lights at the switch they still stay on…
after turning off the car they will stay on for 10 secs (which isn’t the worst). The rest is a head scratcher… what did I do wrong? I did exactly as you did. 2017 XLE.
any help is appreciated!
Great job! Wish you were in texas, I'd gladly pay you to do this for me lol.
I actually am in Texas. I’m in Houston. 🤘🏻
Like the running boards where did u get em at?
Does the fogs lights still show bright seeing half is covered ?
Awesome videos brother. Keep them coming. Your wife's highlander is Hot
Hi I really like this video and I installed the same lights really looks great , but I have a question is your light turn on by them self any time?
After a week of installation it will turn on automatically any clue why this happens?
How have these held up since installing them?
Great Job bro. When Amber LED lights on while you step on brake pedal and the engine Auto start Stop shut off the Engine...and when you release the brake pedal the Engine started back up to running did you see any Amber LED lights start to Blinking for 2 seconds? ( These happened only when engine start up only for all LED lights like: LED light bulbs , Interiors LED lights...etc ). if without Auto Start Stop the Engine running all the time No problem.These happened to my Highlander. thanks bro.
How are these holding up? Have you had any issues with the lights or anything?
Nice! Your car would look nice with a blacked out grill... Run that video next!
Already done. Check it out on my page it should be on there. Thanks
Please let me know where did you get it.thank you
Love the video was thinking of putting it that light on mine but my cover look like it's on from the outside not sure if it could fit
I have a 2019 Toyota Highlander and have switchback turn signal that doesn't hyper flash it's not hard to install.
What two fuses do you use?
Where did you purchase the drl headlamps ?
New subscriber here. Nice job and watched your video so many times😀👍🏼. I have a 2020 Highlander and was inspired by your video so I will be doing the same mod. Question: do you know the fuse number and the fuse name that you used for the tap? Also, I saw it was a 10amp fuse, did you ever have issues with the fuse blowing after the mod? I think 10amp fuse will be sufficient but the wiring harness that came with the DRL/signal lights has a 20amp fuse. Do you foresee any issues with using a 10amp fuse (was planning to tap a 10amp INJ fuse) to tap into? Thanks.
Hey! Thanks for the support! Don’t see why you couldn’t use a higher amp fuse wouldn’t hurt. I haven’t had any issues with the 10amp one I am currently using. These are LED lights so they don’t draw much current to cause any kind of issues with blowing fuses
Love the video, can't wait to get the courage to get this out on my 2017 limited. Do you ever plan on putting the "Rear Fog lights?" If that makes sense. They have some that light up with the rear lights so awesome
Thanks, yes I actually have a video on the rear fog lights also. They require a lot more work then these. Check it out.
@@JJBanuelos I subscribed and shared your video! I'll look for it and thank you so much!!
I follow your instruction exactly and for some reason I notice my led sequential lights stays on periodically when the engine stays on... notice the led turn lights were on this morning when I left for work is anyone having this issue?
Can you have more than one T tap on a wire? Planning on installing these, as well as a led DRL strip on headlights with turn signals.
Honestly I’d just stick one t-tap, could potentially cause too much resistance in the circuit & cause issues later on.
Great video! One question is can you wire the red wire to the positive of the DRL positive so the drl fog light will turn on/off with the drl headlight? Or is it not enough power?
Yes you can definitely do it that way if you wanted too.
If you do this, please make a video of the wiring! Thank you!
I have a question: I noticed the opening for the fog lamps are smaller. Looks like a 3/4 moon opening. How does that affect the fog lamp light pattern/spread? Thanks!
Doesn’t affect the light output at all. To me I didn’t even notice a difference
I watched you r vids and i want to know if the circle fog light still works after installing the sequential lamp. because watching, it obvious the circle fog lamps didnt light up after the new was installed
Yes they still work, I just had the switch off to show you the new lights. You can have both on if you want. These do t affect the fog lights.
Also at end when lights were turned on the standard led running lights on passenger side looked like they were glitching a little was that camera or was there an issue?
Just the camera it’ll do that when filming led lights
Where did u get ur headlights ????
Are you're headlights after market? I want some information about them. Thank you. Sick car btw
I've been looking at some but man there expensive! Maybe if someone sponsors me some i'll consider it lol. Thanks for watching!
Hii
Thnx for the nice video
Do i need to add a relay ?
I did not, but it would hurt if you did.
What website to buy from best ?
Quick question , i just instaled the same fog light like you use , the thing is sometimes the fog light just turn on randomly when the car is off, what do you think? Is that supposed to be normal?
It’s prob because of the circuit we tapped into in the fuse box my stay awake as technicians say. You could use another switched 12v source in the fuse box or just leave it alone. They won’t stay on all night or forever just momentarily until the system shuts power to it.
I'm sure everyone that has done this mod and followed the instructions to use the EFI fuse slot that sometimes, the lights stay on even after you turn off the car.
I ended up running a wire to the cabin interior fuse box.
Have you considered led turn signals instead of halogen ? Would love to see a video on that and how you fix hyper flash!
Never really thought about them but maybe I’ll take a look into them
@@JJBanuelos I appreciate it! Love you videos and all the mods to your Highlander.
Where did you buy the lowering springs? I have 2014 Highlander with 24 inches rims.
I should have them linked down below my description in the video. They should take you to the Amazon store where I purchased them
I wanted to find out if the blue and yellow wires were 16 gauge wire running out of the control box to the turn signals
I'm sorry I meant 18 gauge or 20 if there's even any
I followed your wiring instructions: connected the yellow and blue wires to the red wires on each side of the turn signals and no turn signals. Hazards and drl work but no turn signal. Suggestions? Is the base model different than to LE model?
Never mind. I figured it out. The wiring were reversed. It must be a manufacture error. I just spliced it and reversed the wiring. It worked.
Cool glad you got them to work. That’s weird that it was different on yours. Thanks for updating this just in case someone else runs into this issue
Is there an aftermarket option for the fog assembly or do you have to go with the oem? I have a base 2018 highlander so it didn’t come with fogs
These are direct bolt in & utilize the same factory connector. amzn.to/3aIXkRR
Trailblazer Films What about the bezzel?
@@josenavarrete8407 just look up 2017 - 2019 toyota highlander fog lights you will find tons of options. I did, going to buy fog lights for my wife's base model.
Edit: buy LED fog bulbs before installing them to avoid having to go back in at a later time.
Question sir where did you buy the fuses connector?thanks
I bought it from Amazon I should have a link for it below my description.
Cool! Do you do this for other people? I’m interested
If I get time yes.
My Highlander didn’t come with fogs, at all, are there any diagrams that I can use? I’m not sure what part of the firewall I can insert wires.
Yeah I can get you a wiring diagram. What year & trim level is your Highlander?
Hi. Can you do the same for me? I have a 2019 LE V6.
What kind of spacers you have on your wheels ?
I made a video on them on my channel. Check it out & I should have them linked out below my description in that video
Hey nice video.
Does installing these and the rear fog lights void the factory warranty?
Nope it’s cosmetic does not affect power train or basic warranty
I just installed mine but I ran into a problem. I did exactly what u did. But for some reason my turn signals are mixed up. When I turn on the right turn signal my left one turns on lol. Any ideas on how to fix it or what I did wrong?
How have they been holding up? It's been sometime now since install have you had any issues?
They haven’t failed me yet
GO BRONCOS!!!!
where can i buy extra cable to make the yellow cable longer so it can reach the left headlight
In your local automotive store like autozone or advanced auto. Go to bulbs and fuse section, you will see all the wiring you need.
I have a 2017 le so I don’t come with all the lights I just installed them u think at fuse will work out the same ?
Yes should be the same
@@JJBanuelos thanks bro I appreciate it I wired everything I just ordered that part it was a pain to get through the firewall
I did the same but sometimes the lights I installed turn on when the car is off. I don’t know if’s because of the fuse.
I’ve heard this from a few other people as well I’ll have to look into it for you guys.
Just now my led lights were on and my neighbor told me. Anyone find out why? The car was parked and was off since my wife got home for a few hours now.
Hi, i noticed you wear your camera on your head. What kind of camera is that? Do you mind sharing?
It’s a GoPro hero 8. I’ll provide you with the link with the kit I have. amzn.to/37xI1et
Hi my name is Geo I fallow youI have installed same ligths in my higlander 2017 but I have a cuestión wy those lights come on by self wend the car is off y you can help me I appreciate thanks
Your not the first to tell me this. I’ll have to do a update video on this
Any one knows what is happening to my led have problems with one side are flickering ???? Help
where is the white wire goes ? i got 2 yellows connected to the turn signals. the control unit got 3 wires( Black/red/white) black goes to the negative terminal / red connects to the fuse tap adapter/ and what about the white one ?
The white might be a parking light option?
@@JJBanuelos might be. I am not too sure. Unfortunately, my purchase didn't come with any installation instructions.
Wat size spacers u installed??
Check out the video where I lower my Highlander. Below the description in that video I have a link to them.
The instructions were easy to follow, thanks for the detailed video. I have one question though, i did everything the installation was done completely as per direction but the lights come on randomly by themselves and turn off after some while even when the car is off. Any idea as to why that could be happening? Please suggest a fix if possible, thank you again!!
I’ll look into it & see if I can find a solution for you. Maybe trying to use a different power source then the one I recommend will work. I’ll get back to you on that.
@@JJBanuelos thanks i really appreciate it. I did exactly what you showed in video but don't know why its happening.
Use a different fuse slot in your fuse box. I had the same issue. It’s weird that some doesn’t experience it but some do like us. I am monitoring my Highlander every hour or so and see if the drl lights will turn on.
@@rikimarutenchu6485 how’s the drl? Does it still come on after tapping to another fuse?
@@dyeypi15 drl stays off and for good. It worked.
Can I install if I do have highlander LE which doesn’t have fog lights?
I believe you can.
Yes you can but you have to use the fog lamps that came with the kit since the factory fog cover won’t fit and look good. You can hook the aftermarket fog lamps kit that came with it. It’s very easy. I did it in my LE.
Do they make them for the xle 2016 model
Only for the ones that have this front bumper design.
looks good OEM on the highlander but not 4runner
Mine was installed a couple of weeks ago, but I have a problem, it turns on by itself at night. Any idea what may be causing it.
I’ve heard a couple people mention this. I’ll look into it for you guys.
@@JJBanuelos Thank you, be most grateful if you could email me your findings at gtuisawau@yahoo.com so I can get it rectified.
Any idea what happened? Mine just did the same thing. Turned on. My neighbor told me luckily so I disconnected the fuse and reattached it. Anyone find out whats goin on?
Are the signal lamps going to last long
Mine have been good.
Is the front lip aftermarket ? If so, link ?
Yes it is I’ll send you a link. I have a video on it as well. Check it out on my channel.amzn.to/3fzxqlZ
Can someone do this for my car in Chicago
I followed your directions to the letter BUT when I turned on the power something quirky happened.....everything is working.....flashers all the way around, turn signals all the way around. Here's the quirky part....the drive lights are different. The passenger side is white and the driver's side is amber. I checked, double checked and triple checked the wiring and connections and nothing seams to be out of order. I am using everything you suggested from Amazon and this really has me perplexed....any suggestions?
That’s strange, you might have received a faulty part. There’s really no way to mess up the wiring since all we’re doing is connecting them using there connectors. Only wiring we have to do is give them power. I would send them back & get a new set. Probably not what you wanted to hear but that’s prob the only way to fix it without cutting & rewiring the side that has the incorrect lighting.
My thoughts exactly and you're right I didn't want to hear that but it's the truth....thank you
Shame on me for performing due diligence after-the-fact but I did and here's the conclusion. Toyota offers several trims in the 2019 Highlander, LE, LE Plus, XLE, SE, Limited, Platinum, Hybrid LE, Hybrid XLE and the Hybrid Limited with AWD available for all of them. What's more the turn signal wires change color based upon the trim level. The wire color of my 2019 Highlander Limited AWD turn signals are driver's side "blue" and passenger's side "red" NOT red on both sides. When turned on my sequence lights resemble that of an emergency laden vehicle except one of them are white. This is of course due to incorrect wiring. I learned the change in colors after reviewing Toyota's wiring schematic for all the trims. You couldn't possibly have anticipated this minor yet significant detail but now that you do know you have the responsibility to inform your subscribers. In the meantime, I have to figure out how to fix my problem without having Toyota replace the wiring harness.
Hi what is the brand of you side step?
They are factory you can find them on Amazon
What type of headlight bulbs are in there?
I have Lasfit's custom Highlander H11 in there. Check out my video review on them. They are excellent!
Where’s the video of the running boards installation? I really like those turn signal lights. 👍
My running boards came factory when purchased new from the dealer
@@JJBanuelos cool thank you for the quick response.
Any recommendations in Chicago who can do this ?
I can do it
Any solution to the led lights turning on by itself when the car is off and back off around 15 to 30 minutes? Anything would help they look nive on my wifes highlander and would hate to remove them
I have the same
I solved mine I just switch the power supply to a different fuse other
@@hmongxwb88hello. What fuse you use to solve the stay in light problem?
I have to go check later and let you know in the comments here.. yea it was a headache when mine was doing that so I know how u feel
@@hmongxwb88 let us know if that would be helpful
where is you re address i have toyota kluger this is good job
Installed mine on my 2019 highlander following the directions in your video but only the drl lights up and not the led. Blinkers work as well, What am I doing wrong?
Not sure I’d double check your connections to verify everything was connected right & making good contact. Some time if you unplug & plug the t-taps they start working if they don’t make good contact