Does the dot get low enough to be right on top of the bead? I have a Burris speed bead mount and I love how low it sits but it won’t stay sturdy. Literally lose its zero from recoil. Also how well do these hold up to recoil? I mostly wing shoot, dove/duck so lots of shooting
Hey Cole sorry for the late reply. The dot will be maybe an inch above the front bead. It may be different depending on the gun. I have have used it for wing shooting and I would say it’s 50 50 but I’m not a great wing shooter lol. As far as recoil it hold up great if you get a good sight. I have found that cheap red dots can’t be unreliable. The best sight for the money that I’ve found is an AT3 Tactical ARO Micro Red Dot. You can get them on Amazon for about $130.
I’ve never seen the screws bend the plate. It doesn’t have to be extremely tight. I have always only hand tightened the mount and have never had any problems.
@@fullfanryangreathouse4278 no i got the wrong one lol who would have guessed that! It's alright I'm getting a ff3 and being done with it! But that's a slick setup you got good luck this spring!
I got the ADE RD3 and the pic mount screws into the sight holding the battery inside, only way to adapt the sight is to take the pic mount off thus battery won't work. Was this your problem? Because it's mine lol
It hard to remember now. But I think I was able to setup it up normally. I spoke with Greg the owner and he sent me another mount that would work perfect for it.
I had my gun cerakoted at FMJ Armory in Lagrange, GA. I just left the Mount screw onto the gun. When they did it. The sight is just Mossy Graphics wrap along with the stock and fore end.
That gun is sharp. I like that!
I just received my mount today from Meadow Creek, scope on its' way. Can't wait to sit it up this week.
Awesome. I’m sure you will love it.
Hi, is this mount and red dot works for beretta urika 391.
If you have a rail on your gun then it will work. The model now is universal.
Who did the new finish on your gun?
FMJ armory.
Does the dot get low enough to be right on top of the bead? I have a Burris speed bead mount and I love how low it sits but it won’t stay sturdy. Literally lose its zero from recoil. Also how well do these hold up to recoil?
I mostly wing shoot, dove/duck so lots of shooting
Hey Cole sorry for the late reply. The dot will be maybe an inch above the front bead. It may be different depending on the gun. I have have used it for wing shooting and I would say it’s 50 50 but I’m not a great wing shooter lol. As far as recoil it hold up great if you get a good sight. I have found that cheap red dots can’t be unreliable. The best sight for the money that I’ve found is an AT3 Tactical ARO Micro Red Dot. You can get them on Amazon for about $130.
This mount is a game changer..Definitely gonna purchase one to put the flop on a long beard...
Awesome
Mounted holosun on my a300 to torque specs. Looks like screws has plate bent up a little, normal?
I’ve never seen the screws bend the plate. It doesn’t have to be extremely tight. I have always only hand tightened the mount and have never had any problems.
Great video Mr. Ryan my friend I'm try that little mount thanks brother ...
Hi,
Can I get one of this mount in Uk?
I need to fit a Venom on a Beretta. Thanks
I spoke with the owner Greg Maher. He told me he is hoping to have a European dealer with inventory in a couple of weeks.
Exactly what I'm looking for, thank you
No problem. If you get one let us know how you like it.
I got the universal mount and the ADE but the sight is wider than the mount. So back to the drawing board boys
Does the sight fit onto the mount.
Or I should say do the posts on the mount line up with the hole under the sight.
@@fullfanryangreathouse4278 no i got the wrong one lol who would have guessed that! It's alright I'm getting a ff3 and being done with it! But that's a slick setup you got good luck this spring!
I got the ADE RD3 and the pic mount screws into the sight holding the battery inside, only way to adapt the sight is to take the pic mount off thus battery won't work. Was this your problem? Because it's mine lol
It hard to remember now. But I think I was able to setup it up normally. I spoke with Greg the owner and he sent me another mount that would work perfect for it.
Any number for a phone order for meadow crk?
They have a phone number on their website.
Just curious where u got your mount and sight dipped??? That's adds a nice little touch to it!!!!
I had my gun cerakoted at FMJ Armory in Lagrange, GA. I just left the Mount screw onto the gun. When they did it. The sight is just Mossy Graphics wrap along with the stock and fore end.
Gotta get one for my gun before I get in the woods
great
Excellent mounting system. I love it.
The way you mount it gives me anxiety 😂😂😂😂😂
Country AF