I did that to a craftsman box that had some rusty scratches on the top. Sanded it down and hit it with some 2 in 1 primer spray paint and duplicolor bed liner I found. It’s a much lower quality product but turned out surprisingly well
I'm a snap-on dealer and ive taken in some beat up trade-ins that could use this type of love. I should try given some life back to a old flip top roll cart one day before I try reselling it.
I'm a bed liner. I think that looks awesome for spray can stuff no gonna knock that. But my big pet peeves were touching it after wiping it clean and using brake clean/alcohol. I use acetone as it is in my opinion alot better at getting all finger grease and all that off. But otherwise looks awesome!
@@RustbeltMechanic haha no worries I'm just going off preference. And I forgot to add i have never used this stuff but is it possible to do a smooth base coat and do texture over to. This will add alot more durability to the product!
Considerin the price of the tool box. I would think it could protect itself from anything. Dont buy snap on anymore people. Let them go bankrupt please.
Nice box. Those LEDs last 1.5 years if left on continuously, but if you turn them off every day, the switch that turns them on fails much quicker. Mine just failed on my epic. Terrible design on Snap's part. The pain to remove the top if you have the top hutches.
I can almost swear that you had a video where you sprayed the rubber mat/cover of a SO KRSC roll cart? I just can't find it. Am I dreaming dreams here?
Just bought a old used box and the paint is no longer available the bike drawer has big flakes of paint missing and some surface rust. i was just thinking about doing this around the bottom. And i just made my decision. Lol
@@RustbeltMechanic awesome man thanks for getting back to me! I figured you had something out comparable, but I was too lazy to wanna look for it if we're being honest lol. As many videos as you have of it, it might be worth making a "raptor liner" playlist if that's an easy thing to do.
We’re gonna find out soon! Also sorry about the delay on getting the ratchet out. Hope to have it out the end of this week when I can make it to the post👍🏻
Love how they clean and then touch it again and again with there hands!!
I did that to a craftsman box that had some rusty scratches on the top. Sanded it down and hit it with some 2 in 1 primer spray paint and duplicolor bed liner I found. It’s a much lower quality product but turned out surprisingly well
Everytime he puts his hand on that thing he's leaving oil on it....
Looks really good after second coat on the close up great work ron and kyle @Rustbelt Mechanic
Purple trim looks sick
Lol Ron is like sorrryyyyyy lmfao @Rustbelt Mechanic
I'm a snap-on dealer and ive taken in some beat up trade-ins that could use this type of love. I should try given some life back to a old flip top roll cart one day before I try reselling it.
Yes exactly!!
A run around with a tack rag would be in order on this job
I'm a bed liner. I think that looks awesome for spray can stuff no gonna knock that. But my big pet peeves were touching it after wiping it clean and using brake clean/alcohol. I use acetone as it is in my opinion alot better at getting all finger grease and all that off. But otherwise looks awesome!
I agree with the touching after cleaning. My eye was twitchin.
Lol sorry guys, I’ll keep that in mind for next one.... as you can tell, definitely not a paint guy
@@RustbeltMechanic haha no worries I'm just going off preference. And I forgot to add i have never used this stuff but is it possible to do a smooth base coat and do texture over to. This will add alot more durability to the product!
You’re a bed liner?
Looks great. Good thing that stuff is chemical resistant because the chemistry between you two is 🔥
😂😂this guy...
That’s pretty dope. I like that idea
Nobody:
Not even a single soul:
Every single auto body guy “you should never paint in direct sunlight”
Not to mention overspray issues painting around all those customers cars in the shop haha
Well damn spoke too soon they only did that with the adhesion promoter lol
Considerin the price of the tool box. I would think it could protect itself from anything. Dont buy snap on anymore people. Let them go bankrupt please.
To eliminate tiger strips you fog the last coat
I just picked up a beat up KRL1001 Master Series and it’s going to get raptor lined! Thanks for the video!
I want to make a top for my 4s when i get one. Rather have bed liner then a stainless top
Damn good idea. I'm gonna do this to mine.
Nice box.
Those LEDs last 1.5 years if left on continuously, but if you turn them off every day, the switch that turns them on fails much quicker. Mine just failed on my epic. Terrible design on Snap's part. The pain to remove the top if you have the top hutches.
I went to Raptor’s website and didn’t see black listed as one of their colors. That is black that you used isn’t it?
I can almost swear that you had a video where you sprayed the rubber mat/cover of a SO KRSC roll cart? I just can't find it. Am I dreaming dreams here?
The area behind them, isn't that where McBake had his toolbox? Did he move his toolbox to another area of the shop or something?
That’s exactly where it was.... but no he left the shop about 6 months ago.
I was thinking of coating the top of my S-O KRSC46. How has the Raptor Liner held up?
What grade sand paper do you use?
Just bought a old used box and the paint is no longer available the bike drawer has big flakes of paint missing and some surface rust. i was just thinking about doing this around the bottom. And i just made my decision. Lol
That’ll look good!
Have you used the liner on wood? I have a top that I made from trailer flooring.
Have a look at my previous videos, i Raptor lined the floor on the inside of my trailer.
Any tips for prepping or spraying diamond plate (bed toolbox) and textured metals like that?
Same process as where I did my chrome on my bumpers in this video....th-cam.com/video/xIEeKDGmFFI/w-d-xo.html
@@RustbeltMechanic awesome man thanks for getting back to me! I figured you had something out comparable, but I was too lazy to wanna look for it if we're being honest lol. As many videos as you have of it, it might be worth making a "raptor liner" playlist if that's an easy thing to do.
Quetio for you
. Hey how you rebuild a fuel filter housing for a Duramax.
La mama longa!!!
Serious question though, does this void your warranty? 😂
Looks nice wonder how it's going to hold up
We’re gonna find out soon! Also sorry about the delay on getting the ratchet out. Hope to have it out the end of this week when I can make it to the post👍🏻
@@RustbeltMechanic ok
Instagram approved!
where you been
@@Silovik_Geist working like a mad man.
How’s it holding up?
Holding up good so far👍🏻
First