The first 1,000 people to use the link will get a 1 month free trial of Skillshare skl.sh/belindacarr07231 Thanks for the feedback on the ceramic paint! I'll work on a dedicated on the Sunshield product.
I'd like to see the paint tests. There are other paints on the market for RV's and boat/marine that have similar properties to the sample that you received. Franks Tropicool for example. Testing these could be another series for your channel. I know people living in RV's, schoolies, and van lifers would be interested.
Ceramic insulation was the only material we used in afterburners and chambers of roasting in the coffee industry. It is slow to apply, but absolutely amazing at how it blocks heat. It was also expensive.
Yes, please, to the request for a review of ceramic paint. I'm in the process of designing a shipping container barn/ADU and house. Your favorite.😉 I've seen videos in the past of ceramic paint for heat resistance and it was impressive but nothing on how it works in the cold as an insulator. Plus, it would be a review by someone I trust. Thanks!
"Oil-resistance" talks about the resistance of a material to dissolving in (mineral) oils. Polystyrene, for example, would dissolve over a short time in e.g. petrol aka gasoline.
Hi Belinda, hope you're well. Another fascinating video, and sadly the downsides seem to exclude this material from the domestic setting. However, the ceramic paint sounds very interesting and I'd like to see more of this tested. Thanks for sharing. Stay safe and keep up the good work. 👍✌
I use kaowool for my forges. I always coat it with satanite clay to prevent the fibers from becoming airborn and becoming a breathing hazard. This stuff is for forges and furnaces like she said. Too expensive for housing.
Yes please do review that paint. It would be interesting to see how painted asphalt shingles stack up against metal roofs or other solutions. See Matt Risinger's recent video: Metal Roof vs. Asphalt Shingles
I get rolls of this since i had a pressure wash company. Its used on burners to heat water. Buy it from a pipe insulation distributor, it cost me 50 bucks for a 50 or 75 ft roll. Great for forges since you can just wrap the insulation so its barrel shaped and its done. Bricks in the bottom and a piece to us as a lid.
Great video Belinda! The install did look very easy. Anything you can cut with your utility knife and make very custom cuts is a plus to me. As well as the lack of possible mold is a big plus. Thank you for being this material to my attention.
lol. You almost broke with that shipping container home comment. Troll level: god mode. Well done. And thanks for all you do on these - it's interesting how material science is evolving for construction.
My father and I made a raku kiln for his ceramic arts out of this product. It's amazing to see in action. I would love to see how the sunshield paint works in TX, as I am from there and I live in the Mediterranean.
I'm building a hacienda-style home in the brutal heat of Arizona. Any paint that can reflect heat is fascinating. I would love to know if it works when used as a prime, i.e., with a pigmented paint over it. Wonderful content. BTW, I complimented you when you wore white; you look equally spectacular in black. Diagnosis: a true "Winter" coloration. Betcha classic bright reds, turquoise, and pinks used in saris are equally good on you 😉since those are also 'winter' colours. Keep up the good work! I hope to see a ceramic heat-reflective paint demo soon.
The moment you mentioned silica I thought "health issue, specially for the workers involved in manufacturing". On the other hand, a biosoluble alternative based on calcium and magnesium sounds almost like a nutritional suplement.
I would like to know your take on residential metal roofing. There are these ads all over Instagram for Erie Metal Roofs. They say they're not like the metal roofs of old where they were loud when rain or hail hit. They also say they look like traditional shingles. I would love to know your take and comparison with these and traditional asphalt shingles.
Metal roofing isn't loud when installed over solid 4x8' sheathing that is used in normal home construction. It's only loud on barns & sheds that have minimal support under the metal.
Other than aesthetics and differences in finish there is literally no significant difference between a corrugated metal roof from the 1920’s and a metal roof of today with regards to sound. If installed properly it will be a phenomenally durable roof. As the other poster said, the sound factor has everything to do with the sheathing and insulation under the metal.
Absolutely timely for me. Also love ceramic technology hence spending huge amount to put ceramic composite siding on house (Ascend). Need to get blown in insulation sucked out thanks to racoons and was thinking. While you have great value and would love to support you SS only goes so far and home keeps making claims. Hope you can keep cool down there
Hi,in my home can this be put up a chimney and wrapped around a wood stove flexi flu liner to stop draughts and heat loss going up the chimney ..thankyou
Something like this might be far better for hot water line rather than the foam that is generally used. This would alos work if you have a hot water loop which I kinda wish we had. In desgining my new home I think I am going to put in a hot water loop along with a cold water loop as well. Some water lines might sit for several days and having a loop would keep the entire line set fresh and cool. Holding that 55F temp in for as long as one can is ideal, as well as the hot water. I am not sure if this is the same stuff used on water heaters to keep the heat in? Though might even work as well. We plan on having a very large water heater of 120 gallon range and then a pre heater 120 gallon that is run directly off solar.
No because it would still have wood studs that burn. For decades you have to have a firewall between units in townhouses, those are the products and process to use if you need them
Pretty good evaluation of the product, Belinda, but I think you gave it a bad rap with the oil resistance. It's not supposed to break down with exposure to oil, but it does have air pockets which will absorb it. That's messy, not degraded. I've dealt with ceramic fiber mats and they're awkward. Yes, we'd like to see more info on the solar paint, please.
Hello Ms. Belinda I've watched most (or all?) your videos about insulation because I have a friend in Indonesia who lives in a tiny house, or cottage, where it gets very hot. She's very poor. What would you suggest to her to insulate her house? Would it be enough just to paint the roof white? The solution should not cost more than 200 dollars or max. 400 dollars in Indonesia prices.
Very interesting video as always. Though you mentioning the safety gear needed when handling it while handling it without any of it made me double stop. Would love a test of the ceramic paint. That sounds pretty awesome.
Neither does spray foam. I was one of the first to take a serious look at container in about 2003. The thermal bridging of the steel floor supports destroyed any benefits of containers. No amount of insulation can counteract that bridging. Just look at the charts.
@@sparksmcgee6641 agreed. but then again, he doesn't recommend the use of containers for permanent dwellings, especially not for affordable housing. if a rich kid, a company or the state swings by to throw money at him, he'll make what they ask for, meanwhile selling parts to rich DIY-ers.
Ceramic Fiber is used for scientific & industrial applications only, it's not really going to be used in building and building science applications. Tho the ceramic paint is interesting, curious how it actually holds up in outdoor situations and if it breaks down more easily to weather
Belinda, this is a misguided video. "How Ceramic Fiber Insulation can lower energy bills" gives one the impression that this is a product for a home. Then you mention it has numerous health issues and and has a low R Value? Then you ask if anyone might use this for their pizza ovens? This is a highly specialized commercial product that needs to be installed by trained professionals.
Well this is a channel for professionals we just let amateurs in to be nice. Biggest use is for pipes and high heat. Great for a backyard metal melting forge. Custom refrigerators and oven ec....
Thank you for the informative video. However: This video has been "ruined" by superfluous and distracting background music. It's tiring attending to the narration over the background music, masking the topic of the video and mostly adding nothing to the content. Narration or music is fine but one on top of the other is annoying.
No you don't HAVE to. It's just standard irritant issues and you don't want to inhale anything which isn't an issue with the out of box product. People working outside get silicosis from dust in the air.
Ceramic fibre insulation can break down into small fibres like asbestos, I would say it is not suitable for domestic situations only for controlled industrial applications like furnaces, check before use!?!
Everything can break down into fibers. Go look at the insulation in your refrigerator, stove, microwave and dishwasher. It's going to be a version of this because it's so stable.
Rockwool™ is NOT made from asbestos. Firstly, Rockwool™ is a proprietary product manfufactured from vermiculite, a volcanic rock. Other mineral wool products also no longer use Asbestos, but use other rocks and ceramic,which are not carcinogenic. If it was, do you think anyone would be handling it without wearing PPE with breathing and eye protection? The presenter is a trained architect and so would be familiar with its hazards. Although US asbestos regulation is relatively poor in comparison with other developed countries, it reflects the power of lobbyists in its politics.
@BigHenFor what makes asbestos so bad for your health, is the tiny particle size that gets into your lungs. Rockwool uses rock dust, just like asbestos, to make its cotton candy like structure. They may not be the same company, but they are the same...tiny particles of dust that are extremely bad for your health and 100% does require PPE when cutting it.
Rockwool (A trade name) or mineral wool insulation can cause breathing difficulties over a period of time (Years) when working with it continuously especially in confined spaces without respiratory equipment as the fibres can be below a certain measurement which directly affects the lungs, this also applies to ceramic fibres (Like pipe and duct insulation fitters and loft insulation fitters), if you have a breathing condition already it is not recommended to install it, people who seldom install it need to wear the appropriate mask (Like with all products which emit dust) and polypropylene suit and gloves and it will be fine, but possibly itchy, but pose no real threat!?!
The first 1,000 people to use the link will get a 1 month free trial of Skillshare skl.sh/belindacarr07231
Thanks for the feedback on the ceramic paint! I'll work on a dedicated on the Sunshield product.
Suure a video on ceramic paint would be interesting!
Belinda can take a mundane subject like insulation and make it interesting. Informative, interesting and easy to watch, its her energy.
I'd like to see the paint tests. There are other paints on the market for RV's and boat/marine that have similar properties to the sample that you received. Franks Tropicool for example. Testing these could be another series for your channel. I know people living in RV's, schoolies, and van lifers would be interested.
Ceramic insulation was the only material we used in afterburners and chambers of roasting in the coffee industry. It is slow to apply, but absolutely amazing at how it blocks heat. It was also expensive.
Good video! Please do the sun shield paint review.
Yes, please Belinda, test the paint.
YES to the ceramic paint. I never knew the stuff existed!
Yes, please, to the request for a review of ceramic paint.
I'm in the process of designing a shipping container barn/ADU and house. Your favorite.😉
I've seen videos in the past of ceramic paint for heat resistance and it was impressive but nothing on how it works in the cold as an insulator.
Plus, it would be a review by someone I trust.
Thanks!
"Oil-resistance" talks about the resistance of a material to dissolving in (mineral) oils.
Polystyrene, for example, would dissolve over a short time in e.g. petrol aka gasoline.
I love that you always give the good and bad - and the bad isn't just "it's too good and you won't ever want to use anything else."
First! Great video BTW! Its good to have you back doing content again!
yes please test that paint.
...love your channel.
Hi Belinda, hope you're well. Another fascinating video, and sadly the downsides seem to exclude this material from the domestic setting. However, the ceramic paint sounds very interesting and I'd like to see more of this tested. Thanks for sharing. Stay safe and keep up the good work. 👍✌
I use kaowool for my forges. I always coat it with satanite clay to prevent the fibers from becoming airborn and becoming a breathing hazard. This stuff is for forges and furnaces like she said. Too expensive for housing.
Yes please do review that paint. It would be interesting to see how painted asphalt shingles stack up against metal roofs or other solutions. See Matt Risinger's recent video: Metal Roof vs. Asphalt Shingles
I'll check it out. Thanks for the heads up!
I get rolls of this since i had a pressure wash company. Its used on burners to heat water. Buy it from a pipe insulation distributor, it cost me 50 bucks for a 50 or 75 ft roll.
Great for forges since you can just wrap the insulation so its barrel shaped and its done. Bricks in the bottom and a piece to us as a lid.
Great video Belinda! The install did look very easy. Anything you can cut with your utility knife and make very custom cuts is a plus to me. As well as the lack of possible mold is a big plus. Thank you for being this material to my attention.
Thank you!
Very interested in the Sunshield paint. Equally interested in how it handles rain and hail.
Speaking of CaCO3 paints, Nighthawk Projects recently did a video on making it at home.
Definitely test the sun shield. as fellow Texans we are really interested in the results.
Yes please! A video on ceramic paint would be so interesting given your objectivity and the research you present.
"This insulation that I am handling with my bare hands should not be handled without gloves."
The piece she was handling was in a plastic bag
lol. You almost broke with that shipping container home comment. Troll level: god mode. Well done. And thanks for all you do on these - it's interesting how material science is evolving for construction.
please do test the ceramic paint!
What is the possibility to wrap the insulation to incapsulate the fibers? For residential use.
My father and I made a raku kiln for his ceramic arts out of this product. It's amazing to see in action. I would love to see how the sunshield paint works in TX, as I am from there and I live in the Mediterranean.
Belinda absolutely ROCKS!!!
Many thanks i was desesperate to find such a good explanation. All is now much clear!
I would ABSOLUTELY like to see how the ceramic paint would work on shipping containers. I have had much difficulty finding good ways to insulate them.
Wondering if Sunshield compares to ThermCels ceramic paint additive. We use the later on our beehives ans ceilings.
Used Rockwool in my Master remodel- love it!
Is that SPI out of GA? Yeah, test it... id like to see how it really performs!
I'm building a hacienda-style home in the brutal heat of Arizona. Any paint that can reflect heat is fascinating. I would love to know if it works when used as a prime, i.e., with a pigmented paint over it. Wonderful content. BTW, I complimented you when you wore white; you look equally spectacular in black. Diagnosis: a true "Winter" coloration. Betcha classic bright reds, turquoise, and pinks used in saris are equally good on you 😉since those are also 'winter' colours. Keep up the good work! I hope to see a ceramic heat-reflective paint demo soon.
The moment you mentioned silica I thought "health issue, specially for the workers involved in manufacturing". On the other hand, a biosoluble alternative based on calcium and magnesium sounds almost like a nutritional suplement.
Asbestos is a great insulator too, it's the rub between what's good for the building and what's good for occupants
Great video and lot's of information. Maybe the manufacturer could make a coating for roofs. Southern state could use it.
Amazing video as usual ❤ plz make a video for using the paint on corrugated sheets
Thanks again for really thorough work; a fascinating, if dangerous, product!
Amother great video. I love the research. Thank you.
Im interested in the IR reflective paint.
I would like to know your take on residential metal roofing. There are these ads all over Instagram for Erie Metal Roofs. They say they're not like the metal roofs of old where they were loud when rain or hail hit. They also say they look like traditional shingles. I would love to know your take and comparison with these and traditional asphalt shingles.
Metal roofing isn't loud when installed over solid 4x8' sheathing that is used in normal home construction. It's only loud on barns & sheds that have minimal support under the metal.
Other than aesthetics and differences in finish there is literally no significant difference between a corrugated metal roof from the 1920’s and a metal roof of today with regards to sound. If installed properly it will be a phenomenally durable roof. As the other poster said, the sound factor has everything to do with the sheathing and insulation under the metal.
Thanks for the review. I am also interested in hearing about the ceramic paint qualities.
@NightHawkInLight recently published a recipe for radiative paint. Would be interesting to compare it against the one you were sent.
I'm partial to high-temperature hemp!)
The ultimate God product right there.
I would absolutely love to see th ceramic paint tested.
Absolutely timely for me. Also love ceramic technology hence spending huge amount to put ceramic composite siding on house (Ascend). Need to get blown in insulation sucked out thanks to racoons and was thinking. While you have great value and would love to support you SS only goes so far and home keeps making claims. Hope you can keep cool down there
8:00 - "Particular set of skills?" 🤣 Liam Neeson would like to have a word with you!
Hi,in my home can this be put up a chimney and wrapped around a wood stove flexi flu liner to stop draughts and heat loss going up the chimney ..thankyou
I wonder if this material can be used in the lining of protective clothing for firefighters 🤔
Cermaic paint!! I want to see it put to the test!
I have used the silicone insulation in my engine bay to keep the heat down .
Hi! Thank you for information! Enjoy your weekend! 🤗
Something like this might be far better for hot water line rather than the foam that is generally used. This would alos work if you have a hot water loop which I kinda wish we had.
In desgining my new home I think I am going to put in a hot water loop along with a cold water loop as well. Some water lines might sit for several days and having a loop would keep the entire line set fresh and cool. Holding that 55F temp in for as long as one can is ideal, as well as the hot water.
I am not sure if this is the same stuff used on water heaters to keep the heat in? Though might even work as well. We plan on having a very large water heater of 120 gallon range and then a pre heater 120 gallon that is run directly off solar.
really enjoy your channel
Thank you!
Yes on the sun shield paint
Yes test the Sunsheild Paint,
Great video, thank you 🙏🏼💚
What is difference between ceramic FIBER and rock wool insulation. Cost, water wicking/retention?
7:05 You might want to um ... do that yourself.
Ceramic paint test please.
Could this insulation be added to traditional fiberglass in wall cavities & attics as a fire break?
No because it would still have wood studs that burn. For decades you have to have a firewall between units in townhouses, those are the products and process to use if you need them
Yes, I think that will be very interesting
Pretty good evaluation of the product, Belinda, but I think you gave it a bad rap with the oil resistance. It's not supposed to break down with exposure to oil, but it does have air pockets which will absorb it. That's messy, not degraded. I've dealt with ceramic fiber mats and they're awkward.
Yes, we'd like to see more info on the solar paint, please.
So Belinda, you're saying I should build a shipping container home and use that paint on it? Got it.
Hello Ms. Belinda I've watched most (or all?) your videos about insulation because I have a friend in Indonesia who lives in a tiny house, or cottage, where it gets very hot. She's very poor. What would you suggest to her to insulate her house? Would it be enough just to paint the roof white? The solution should not cost more than 200 dollars or max. 400 dollars in Indonesia prices.
Nice content!
Belinda, I found fire proof paint on Amazon awhile back. I'm sure it would make for some great content if YOU were to do a test video on it. 👍👍
Thanks! I'm working on it
Thank You
Very interesting video as always. Though you mentioning the safety gear needed when handling it while handling it without any of it made me double stop.
Would love a test of the ceramic paint. That sounds pretty awesome.
It's wrapped in plastic during the talking head sections.
I've been asking about ceramic paints. We use it on beehives but we are always looking for better.
The Container Guy recommends spray foaming, so you're correct that more traditional insulation doesn't work.
Neither does spray foam. I was one of the first to take a serious look at container in about 2003. The thermal bridging of the steel floor supports destroyed any benefits of containers. No amount of insulation can counteract that bridging. Just look at the charts.
@@sparksmcgee6641 agreed. but then again, he doesn't recommend the use of containers for permanent dwellings, especially not for affordable housing. if a rich kid, a company or the state swings by to throw money at him, he'll make what they ask for, meanwhile selling parts to rich DIY-ers.
Ceramic Fiber is used for scientific & industrial applications only, it's not really going to be used in building and building science applications. Tho the ceramic paint is interesting, curious how it actually holds up in outdoor situations and if it breaks down more easily to weather
It's used on pipelines and all kinds of pipes in commercial buildings.
Would this camouflage you from drones?
Is Sunshield a Calcium Magnesium product? Anything else seems like a hard "No".
Belinda, this is a misguided video. "How Ceramic Fiber Insulation can lower energy bills" gives one the impression that this is a product for a home. Then you mention it has numerous health issues and and has a low R Value? Then you ask if anyone might use this for their pizza ovens? This is a highly specialized commercial product that needs to be installed by trained professionals.
She gave you information for free. This video took a lot of work to make. And you are over here critiquing the title of the video?
@@willcarter7079 Yes.
Well this is a channel for professionals we just let amateurs in to be nice.
Biggest use is for pipes and high heat.
Great for a backyard metal melting forge.
Custom refrigerators and oven ec....
Thank you for the informative video.
However: This video has been "ruined" by superfluous and distracting background music. It's tiring attending to the narration over the background music, masking the topic of the video and mostly adding nothing to the content. Narration or music is fine but one on top of the other is annoying.
Must wear glass,gloves,masks when handling this...
Holds it without them 😅
Would at least expect gloves 😂
No you don't HAVE to. It's just standard irritant issues and you don't want to inhale anything which isn't an issue with the out of box product.
People working outside get silicosis from dust in the air.
Ceramic fibre insulation can break down into small fibres like asbestos, I would say it is not suitable for domestic situations only for controlled industrial applications like furnaces, check before use!?!
Everything can break down into fibers.
Go look at the insulation in your refrigerator, stove, microwave and dishwasher. It's going to be a version of this because it's so stable.
Rockwool is also asbestos
Rock wool is NOT asbestos, nor does it contain any asbestos.
Rockwool™ is NOT made from asbestos. Firstly, Rockwool™ is a proprietary product manfufactured from vermiculite, a volcanic rock. Other mineral wool products also no longer use Asbestos, but use other rocks and ceramic,which are not carcinogenic. If it was, do you think anyone would be handling it without wearing PPE with breathing and eye protection? The presenter is a trained architect and so would be familiar with its hazards. Although US asbestos regulation is relatively poor in comparison with other developed countries, it reflects the power of lobbyists in its politics.
@BigHenFor what makes asbestos so bad for your health, is the tiny particle size that gets into your lungs. Rockwool uses rock dust, just like asbestos, to make its cotton candy like structure.
They may not be the same company, but they are the same...tiny particles of dust that are extremely bad for your health and 100% does require PPE when cutting it.
Rockwool (A trade name) or mineral wool insulation can cause breathing difficulties over a period of time (Years) when working with it continuously especially in confined spaces without respiratory equipment as the fibres can be below a certain measurement which directly affects the lungs, this also applies to ceramic fibres (Like pipe and duct insulation fitters and loft insulation fitters), if you have a breathing condition already it is not recommended to install it, people who seldom install it need to wear the appropriate mask (Like with all products which emit dust) and polypropylene suit and gloves and it will be fine, but possibly itchy, but pose no real threat!?!
No it's not.
The ceramic paint R-Values don't hold up. See www.ftc.gov/business-guidance/blog/2020/07/button-your-coating-claims-making-energy-representations
Yeah all they do is a bit of IR reflection.