I can't watch! The 3cx is on the job again too

แชร์
ฝัง
  • เผยแพร่เมื่อ 31 ม.ค. 2025

ความคิดเห็น • 35

  • @AndyJ5431
    @AndyJ5431 หลายเดือนก่อน +1

    For your type of operation Michael, having the boards is the best way to proceed. Everything available at a glance rather than having to hunt for it on computer controlled databases. Don’t change it. 🇬🇧🚜👍

  • @johncastle1702
    @johncastle1702 หลายเดือนก่อน +1

    Hi Michael, always love to watch your vids, I notice you have a frequent cough, please don’t ignore this, get checked out, it may be something or nothing, but if it’s something it may well be the best checkup you will have, take care of yourself, no one else will!

    • @michellewallis93
      @michellewallis93 หลายเดือนก่อน

      Michael has a chest infection :) but thank you.

  • @stevewareing8525
    @stevewareing8525 หลายเดือนก่อน +5

    Great video Michael, I'm with you on if it's not broke don't fix it. Regarding the decals peeling off, have you thought about spraying them with a strong contact adhesive rather than just rely on the sticky already on them. I can't cost that much for a can so might be worth a try. Nothing ventured nothing gained.👍.

    • @gavinhodgson1728
      @gavinhodgson1728 หลายเดือนก่อน

      How about a bright white paint

  • @DJC995
    @DJC995 หลายเดือนก่อน +3

    Hi Michael Nice one have a good weekend thanks again

  • @ianleak
    @ianleak หลายเดือนก่อน +2

    Brilliant video, you are doing Brilliant hopefully get to see you soom Michael

  • @martincave780
    @martincave780 หลายเดือนก่อน +3

    Coat of clear lacquer over the decals will never lift 💯💯💯

  • @johnwarwick4105
    @johnwarwick4105 หลายเดือนก่อน +1

    That’s got ho be the new logo. “Only the best at GCS” 👍 electronic records are great for traceability and looking back, but white board is easy and reliable but I am guessing you must have a folder somewhere for each items check lists

  • @rickygillett2467
    @rickygillett2467 หลายเดือนก่อน +1

    Great video I count 31 Stuart’s 😂

    • @GCSMachinery
      @GCSMachinery  หลายเดือนก่อน

      Well done. But we have way more that that

  • @cheechU38K
    @cheechU38K หลายเดือนก่อน +4

    No computer system needed for a smaller company. Any notifications can be sent on WhatsApp work groups. So nice to see the 3cx getting some love after being forgotten when mini diggers came out on job sites.

  • @richardbaker22
    @richardbaker22 หลายเดือนก่อน +1

    Great video Micheal

  • @ErnieBarnett
    @ErnieBarnett หลายเดือนก่อน +3

    good video Michael ,if your system works why change ,if it's not broken don't fix it ..

  • @roba4297
    @roba4297 หลายเดือนก่อน +4

    If your system works, stick with it. The boards show your kit at a glance instead of scrolling down endless screens.

  • @lynjames4306
    @lynjames4306 หลายเดือนก่อน +1

    Tiger Seal is Strong enough to hold the Decals on Michael, But make sure that you keep it under the stickers As it will go off and permanent Brake cleaner will clean it before it's Hard ,

  • @patrickosullivan4021
    @patrickosullivan4021 หลายเดือนก่อน +1

    Michael you should use what a Andy said, only the best for gcs, nice ring to that

  • @nickwebster282
    @nickwebster282 หลายเดือนก่อน +1

    Keep your system, so everyone can quickly look at the board. To computerize the system you would need to employ more staff to input the information.

  • @hughcarrigan7824
    @hughcarrigan7824 หลายเดือนก่อน +1

    Database is the way to go, but you need good backup systems etc. But you also need to know how to use IT systems, so if your old school and it works leave well enough alone.

  • @jeremiahkearney5191
    @jeremiahkearney5191 หลายเดือนก่อน +2

    Evening Michael

  • @kenmonk8262
    @kenmonk8262 หลายเดือนก่อน +2

    don't change that works for you

  • @decalshedsignsco6849
    @decalshedsignsco6849 หลายเดือนก่อน +2

    The vinyl is the problem withe the sticker, dont always assume that manufacturer sell the best quality decal. i produce new decals everyday for all types of machinery and no failure. make sure surface is totally clean and degreased and because its recessed make sure no air pockets are left around edges as water seeps in an it lifts, id bet thats whats happened here. when you apply it make sure its well rubbed down and sealed at edges where its in recess, then apply gentle heat over it when applied and it will never move. Need any help give me a shout, Colm

  • @WilliamStevens007
    @WilliamStevens007 หลายเดือนก่อน +2

    3CX on servo's then. Whats the dual drive mean. I love a 3cx and done thousands of hours on them.

    • @Shaunalexander.99
      @Shaunalexander.99 หลายเดือนก่อน +3

      Dual drive machine can be driven from the rear facing position, but not on the road.

    • @WilliamStevens007
      @WilliamStevens007 หลายเดือนก่อน +1

      @@Shaunalexander.99 Ah right, I only ever operated them with sticks.

  • @winstonfoster6009
    @winstonfoster6009 หลายเดือนก่อน +1

    I not sure if you should have sold the hilux only diesel hybrid available next year no straight diesel

    • @GCSMachinery
      @GCSMachinery  หลายเดือนก่อน

      We have a few others and will probably order a new one or two

  • @KristinaPhilipFurnival
    @KristinaPhilipFurnival หลายเดือนก่อน +1

    If it’s not broke don’t fix it

  • @MalcTyler
    @MalcTyler หลายเดือนก่อน +1

    Stick with what works for you 😅

  • @diggerdave.6587
    @diggerdave.6587 หลายเดือนก่อน +1

    Hello Matey! I love the tag line,,,ONLY the best from G.C.S. What a great sweatshirt idea. R.E plant hire board, I agree 100% that it is a good idea. Computers are ok but a whiteboard is a quick glance up to know whats where and with whom. When I worked for CPH down here in Kent they had one in the plant hire office that everyone could see what was in the yard and needed servicing, what was ready for hire and so forth.
    I like the chain/sling rack, keeps em tidy and clean.

    • @GCSMachinery
      @GCSMachinery  หลายเดือนก่อน +1

      Glad you enjoyed it

  • @peterbrennan2343
    @peterbrennan2343 หลายเดือนก่อน +1

    Paint the logo white no more stickers pealing off

  • @GeoffreyMoore-i9k
    @GeoffreyMoore-i9k หลายเดือนก่อน +2

    Joe had similar problems with decals on his new 9m JCB
    You'd think the price they charge and the free advertising, they'd use a better quality product, or revert back to paint and embossed steel lettering
    Careful Daniel, Charlie Chaplin struggled moving from silent to talkies lol
    Take care all
    Geoff

    • @WilliamStevens007
      @WilliamStevens007 หลายเดือนก่อน +1

      Im surprised the paint hasn't fallen off it either. They must have improved the paint looking at it.