I don't have any jet aircraft in my hanger but this one would be one I could fly at my age. It's fast, but I think I could handle it. Nice job John and Dave. Keep up the good work.
Hello. I enjoyed watching that video. Thank you for always providing good information and always supporting you. I also have an F-16. I made a flaperon by allocating 2ch ailerons and use them when landing. In this case, the tail part is also made into an elevon. However, my problem with the EdgeTX is that it does not operate slowly even when switching from flight mode to slow mode. There is no problem in operating on an aircraft with flaps, but... Slow motion does not work only in the flaperon, spoileron, and elevon that use mixing. There is no problem with the function or movement, but the movement is not pretty. I would like you to address this. Because you have the power of EdgeTX settings.
Another great review. Always like the f-16 has a different presence in the air and that's too bad about the graphics. Great job John and Dave. Another great video as always. Take care
Thanks Robert--yes, I agree. I hoped the pink would evaporate away like it did on that dorsal section graphic, but it didn't. And yes, the F16's air presence is fun to watch.
Bit off topic but I've noticed you run ELRS on your planes in few videos, but what is your RX and protocol of choice in helis? I'm bit undecided on my new TX, I recently got a Frsky X18 which I like but I find Ethos a bit long winded for setting certain things up especially on heli side, I have a older QX7 but getting frsky accst rx's doesn't seem easiest anymore
All of my planes have ELRS now. In my helis, I'm still using a stash of R168 RXs with D16 and SBUS--but that was mainly due to my FBL of choice when I built them. Going forward, anything new will get ELRS.
You know you’re a top tier influencer when FMS (And countless others.) have you test drive their goods. 🛩️ Adding please… Forgive me if I’ve not seen it yet, but wondering have you reviewed the Reflex V2 or might you have plans to? As simple as it seems to be in construction, I’ve played the devil with the programming aspect of it. Nothing seems to finalize or confirm that a model type has been loaded.
The Reflex can't really be programmed. The only thing you can do is load a different model profile in them. I've done that, but didn't see much point in it as I doubt I'll move a Reflex from one FMS plane to another. Appreciate the comment about test driving FMS planes. I think overall they're doing a very good job. I'm happy to be associated with them.
@@RCVideoReviews yes Sir. You've made the RC world a better place for us all! I love the Reflex in my PA-18 Super Cub so well that I thought to try it in another similar model. I have a Volantex TrainStar Cub I thought to add to.
FMS Reflex gyros are really meant for FMS planes. I would suggest any Hobbyeagle A3 you can get your hands on. My favorite is the A3S4. And thank you for the kind comment. :)
![[DRIP] ‘Love, Maybe’ PREVIEW](http://i.ytimg.com/vi/U7hwHp95m1k/mqdefault.jpg)
![โรงเรียนดัดสันดาน นักเรียนเถื่อน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/vRKPeXn4Fl4/mqdefault.jpg)
I don't have any jet aircraft in my hanger but this one would be one I could fly at my age. It's fast, but I think I could handle it. Nice job John and Dave. Keep up the good work.
Thanks Bill! This one gets skinny. Look at the Futura too.
@@RCVideoReviewswhat does gets skinny mean please
Good first flight video.
Thanks!
Hello.
I enjoyed watching that video.
Thank you for always providing good information and always supporting you.
I also have an F-16.
I made a flaperon by allocating 2ch ailerons and use them when landing.
In this case, the tail part is also made into an elevon.
However, my problem with the EdgeTX is that it does not operate slowly even when switching from flight mode to slow mode.
There is no problem in operating on an aircraft with flaps, but...
Slow motion does not work only in the flaperon, spoileron, and elevon that use mixing.
There is no problem with the function or movement, but the movement is not pretty.
I would like you to address this.
Because you have the power of EdgeTX settings.
Great review as usual.. very informative! Are you using elrs on this one? What receiver are you using for this one?
Thank you. Yes, I am exclusively ELRS on fixed wing now. This plane has an EPW6.
Another great review. Always like the f-16 has a different presence in the air and that's too bad about the graphics. Great job John and Dave. Another great video as always. Take care
Thanks Robert--yes, I agree. I hoped the pink would evaporate away like it did on that dorsal section graphic, but it didn't. And yes, the F16's air presence is fun to watch.
😃
Absolutely love the F-16 but I haven’t flown a F-22 yet 😢
F22's fly nice.
The pink hue comes off peel them after 24 hours after applying it’s a film but does come off it also explains it in the manual 👍🏻
Thanks for the tip.
You have had success with this? I have not applied mine until I can find someone that has actually had it work
Super kewl looking jet 😎
Yeah man! F16 is a gunslinger!
I kinda miss the tx16s vids.
Wondering, will YOU be doing any MT12 videos?🤞🤞🤞
I will not be doing any MT12 videos. Sorry--don't do surface stuff on my channel. :(
Bit off topic but I've noticed you run ELRS on your planes in few videos, but what is your RX and protocol of choice in helis? I'm bit undecided on my new TX, I recently got a Frsky X18 which I like but I find Ethos a bit long winded for setting certain things up especially on heli side, I have a older QX7 but getting frsky accst rx's doesn't seem easiest anymore
All of my planes have ELRS now. In my helis, I'm still using a stash of R168 RXs with D16 and SBUS--but that was mainly due to my FBL of choice when I built them. Going forward, anything new will get ELRS.
@@RCVideoReviews oh does ELRS now support sbus or is it certain FBL units now support ELRS/CRFS protocol?
It has supported SBUS since 3.3.0.
only 1440gr of thrust @ 74A? Maybe that is the old FMS 70mm fan, with 1850kv
You know you’re a top tier influencer when FMS (And countless others.) have you test drive their goods. 🛩️
Adding please…
Forgive me if I’ve not seen it yet, but wondering have you reviewed the Reflex V2 or might you have plans to?
As simple as it seems to be in construction, I’ve played the devil with the programming aspect of it. Nothing seems to finalize or confirm that a model type has been loaded.
The Reflex can't really be programmed. The only thing you can do is load a different model profile in them. I've done that, but didn't see much point in it as I doubt I'll move a Reflex from one FMS plane to another.
Appreciate the comment about test driving FMS planes. I think overall they're doing a very good job. I'm happy to be associated with them.
@@RCVideoReviews yes Sir. You've made the RC world a better place for us all! I love the Reflex in my PA-18 Super Cub so well that I thought to try it in another similar model. I have a Volantex TrainStar Cub I thought to add to.
FMS Reflex gyros are really meant for FMS planes. I would suggest any Hobbyeagle A3 you can get your hands on. My favorite is the A3S4.
And thank you for the kind comment. :)