MB03. [TwinCAT 3 NC] Axis Control Panel - Motion Online Test [3/20]

#TwinCAT #NC #Motion
MB03. [3/20] Beckhoff TwinCAT 3 Axis Control Panel - Motion Online Test
Next: MB04. Use YT Plot Curve to Monitor Axis Motion • MB04. [TwinCAT 3 NC] H...
Before: MB02. Create Project, I/O Configuration, and Setup Motion Axis • MB02. [TwinCAT 3 NC] C...
In this video, it introduces how to use the Beckhoff TwinCAT 3 Axis control panel (Commissioning Panel) to online test the Axis. The Axis control panel is a convenient tool to initially test the Axis before using the motion control program.
Beckhoff Playlist: • Beckhoff TwinCAT Controls
Motion Control Playlist: • Motion Control
MB01. [TwinCAT 3 NC] Motion Control Hardware and Software Brief Introduction [1/10]
• MB01. [TwinCAT 3 NC] M...
MB02. [TwinCAT 3 NC] Create Project, I/O Configuration, and Setup Motion Axis [2/10]
• MB02. [TwinCAT 3 NC] C...
MB03. [TwinCAT 3 NC] Axis Control Panel - Motion Online Test [3/10]
• MB03. [TwinCAT 3 NC] A...
MB04. [TwinCAT 3 NC] How to use YT Plot Curve to Monitor Axis Motion [4/10]
• MB04. [TwinCAT 3 NC] H...
MB05a. [TwinCAT 3 NC] Call Motion Instructions Reset, Power, Home, Jog in TwinCAT3 [5/10]
• MB05a. [TwinCAT 3 NC] ...
MB05b. [TwinCAT 3 NC] Program MC Reset, Power, Home, Jog in TwinCAT3 [6/10]
• MB05b. [TwinCAT 3 NC] ...
MB05c. [TwinCAT 3 NC] Online Test MC Reset, Power, Home, Jog in TwinCAT3 [7/10]
• MB05c. [TwinCAT 3 NC] ...
MB06a. [TwinCAT 3 NC] Program MC_Velocity, MC_Relative, MC_Absolute Motion Control [8/10]
• MB06a. [TwinCAT 3 NC] ...
MB06b. [TwinCAT 3 NC] Online Test MC_Velocity, MC_Relative, MC_Absolute Motion Control [9/10]
• MB06b. [TwinCAT 3 NC] ...
MB07. [TwinCAT 3 NC] Online Test MC_Halt, MC_Stop to Stop Axis Movement [10/10]
• MB07. [TwinCAT 3 NC] O...
----------------------------
MB08. [TwinCAT 3 NC Stepper] Beckhoff Stepper Motor Motion Control Opening Speech [11/20]
• MB08. [TwinCAT 3 NC St...
MB09. [TwinCAT 3 NC Stepper] KL2541 EL7041 Wiring with Stepper Motor with Encoder [12/20]
• MB09. [TwinCAT 3 NC St...
MB10. [TwinCAT 3 NC Stepper] Drive Stepper Motor at TwinCAT FreeRun Mode via KL2541 Terminal
• MB10. [TwinCAT 3 NC St...

[@johnson554671]

Thank you for making these videos. As I am starting a new job next week exclusively with Beckhoff controls, I will be sitting in my hotel after work watching your motion control series of videos as they're released to help broaden my Bekchoff skillset. I have watched all of your other series with Beckhoff, and they have been VERY helpful. Thanks again!

[@electricalautomation]

Hi I am so glad that sharing could be helpful! The TwinCAT NC series videos will be launched this Month April 2021. Please leave your questions or send me emails if you have any questions or tech discussions. My email can be found at the beginning of the video.

[@rangaswamy8604]

Very good series of videos.

[@electricalautomation]

Thanks for watching, more videos about TwinCAT NC motion control will come soon.

[@Electroplating1]

Very good video well done thank you for making very helpful info. for us

[@electricalautomation]

Glad it was helpful!

[@paulfreed6394]

Very well explained!

[@automationtoyou5099]

Hi your videos are really helpful.

[@electricalautomation]

Glad you like them!

[@davidaguilar2446]

Thank you for your dedication to every video you make. I was wondering if you know how to read the actual torque value of a servomotor and use this value in a PLC program. Basically, I have to turn on a flag if the torque overpass a limit value. I am using the AX5203 -0000-0200 driver

[@electricalautomation]

I/O Devices -> Drive (AX5203) -> Configuration -> Channel A -> Parameter -> Process Data/Operation Mode -> AT or MDT (Select AT) -> Find the S-0-0084: Torque Feedback value. Are you controlling a converting machine? If yes, probably you can also drag S-0-0082 and S-0-0083 Torque Limit value.(MDT)

[@elmcompany3491]

Hello i have a problem with my servo motor. When I set an position for the motor, the position change when i restart my hardware. Do you have any idea what I did wrong? Thanks

[@quocnguyenbao1452]

Thank for video. I am used EL7221 modul but i have a problem With error code 0x8302 feedback-error when enable. Can you help me?

[@electricalautomation]

Probably check the power Wiring of the module

[@user-dg4sh4oh8i]

Hi, I have a problem.
when trying to move a simulated axis I get this error:
'TCNC' (500): 'X' (Axis-ID: 1, Grp-ID: 1): Axis/Group or coupled slave axis has none enabled controller and, therefore, does not take an instruction (error-code: 0x4260) !
couldn't find anything online. could you help?

[@user-dg4sh4oh8i]

never mind. it was the "enabling" panel.

[@electricalautomation]

Have you powered ON your axis by using MC_Power? Also check the MC_Power output ErrorID