BK04. How to Connect Beckhoff Controller using TwinCAT 3 (2 Scenarios)
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2024
- #Beckhoff #TwinCAT #Controller
Method #1. Dynamic IP Address (Initial) 3:55 • BK04. How to Connect B...
Method #2. Fix IP Address (With DVI-Monitor) 11:10 • BK04. How to Connect B...
Next: Link Tags/Variables to Hardware Signal Modules • BK05. How to Link Tags...
In this video, 2 methods ethernet connection methods will be demonstrated to connect Beckhoff controller CX2030 via TwinCAT3 software. The TwinCAT 3 is installed in the Virtual Machine operating system. A brief project with EtherCAT device scan, I/O Tag link, and the program Login will also be shown.
BECKHOFF Playlist
• Beckhoff TwinCAT Controls
BK14. Upload TwinCAT3 Controller and Online/Offline Project Compare
• BK14. Upload Beckhoff ...
BK13. Beckhoff TwinCAT3 Encoder Settings EL5021(SinCos Encoder) EL5151(Incremental Encoder) • BK13. Beckhoff TwinCAT...
BK12. How to Match Version of TwinCAT3 Software and Hardware (CX9020 OS Firmware Upgrade)
• BK12. How to Match Ver...
BK11b. [2/2] Beckhoff TwinCAT3 Sequence Control - Commissioning Test [Valve Sequence Control]
• BK11b. [2/2] Beckhoff ...
BK11a. [1/2] Beckhoff TwinCAT3 Sequence Control by Using "Case..Of" [Sequence Structure]
• BK11a. [1/2]Beckhoff T...
BK10. Beckhoff TwinCAT3 LD(Ladder Logic) & ST(Structure Text) Programming
• BK10. Beckhoff TwinCAT...
BK09. How to Retain/Persistent Variables using Beckhoff TwinCAT3 CX9020 U900 UPS
• BK09. How to Retain/P...
BK08. Beckhoff TwinCAT 3 Licensing
• BK08. Beckhoff TwinCA...
BK07. Use 'Scan' in TwinCAT 3 to Upload and Compare Hardware Configuration
• BK07. Use 'Scan' in T...
BK06. How to Retain Variables in Beckhoff TwinCAT3 via "PERSISTENT"
• BK06. How to Retain Va...
BK05. How to Link Tags/Variables to Hardware Signal Modules in TwinCAT3 PLC
• BK05. How to Link Tags...
BK04. How to Connect Beckhoff Controller using TwinCAT 3 (2 Scenarios)
• BK04. How to Connect B...
BK03. BECKHOFF CX2030 Device Manager Dashboard and Windows System Tutorial
• BK03. Beckhoff CX2030 ...
BK02. How to Simulate BECKHOFF TwinCAT PLC Project via Virtual Machine System
• BK02. How to Simulate ...
BK01.Getting Start with BECKHOFF TwinCAT 3 - PLC Project
• BK01. Getting Started ... - วิทยาศาสตร์และเทคโนโลยี
First of all, you make nice tutorials about TwinCAT. Great job!
I have used TwinCAT for a while. I can upload and download code to my CX controller using a fix IP address. However, I recently had an issue getting connected to my controller. I can see it when I broadcast search, but I don't get an x after pressing add route. Have you seen anything like this before?
@Suthida Thongnuch Hello, Thanks for your watching my channel. Regarding your questions, probably you could check your laptop firewall (try to turn off firewall, the firewall could block the ADS communication) , or check the CX controller firewall and password setting (CX controller default user Administrator, Password '1'). Please let me if you have any new finds.
The fisrt, Thanks for your previous answer. For example i have a system are running with CX2030. When I connect and back up program to my laptop, my system is still running normally, right? I want to be sure and confirm about that because I have to take a project to research but the system not allow stop.
Please find the "Open from Target" from this link infosys.beckhoff.com/english.php?content=../content/1033/tc3_remote_manager/9007202409383563.html&id=, open the target (Uploading a project from the online controller) will not stop the controller. You'd better figure out what the system revision it is using ex. 4022, 4024， you need to use the hardware matched TwinCAT3 software to upload the project. or install the "Remote manager ". Please find my another video "Method 1" from th-cam.com/video/UbuPOTG8m0o/w-d-xo.html, I talked about the "Remote manager ".
@@electricalautomation Thank you sooo muchhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@@sonthanh392 You are welcome, let me know if you have any other questions. It is great to do fully preparation before go onsite.
Appreciate your great work. What is that Target Route? that you can choose Project- Static- Or Temporary? What is the difference in those ones?
You could find the details from this link infosys.beckhoff.com/english.php?content=../content/1033/tc3_system/html/tcsysmgr_addroutedialog.htm&id=
Hi
I started my first steps with an IPC C6920, but I have a problem. When add a new route this IPC appears with error: ads error 1796 (0x704). I can't use off configuration mode o run mode.
Also, the route appears with a padlock.
Have you some idea about this?
Have you typed in the correct username and password when you setup the router connection
@@electricalautomation Yes, I have typed
User: Administrator
Pass: 1
Every time when i switch online i get this warning "An application "port_851" is currently in Run mode on the PLC......This exciting application needs to be replaced"
When I click yes, it is a complete reload and the controller goes to stop.
What could be the problem?
Thank you
I did not have this issue before. Did you install the TwinCAT with 'Run as administrator', and run TwinCAT with 'Run as administrator'. Likely the TwinCAT does not have your drive permission, so it cause the program cannot be downloaded into the target directory.
After broadcast search and adapter selection . Twincat 3 can't find anything
Please check if your target PC has TwinCAT RT or does this TC RT running properly. Also check your target PC's windows firewall.