You make this so easy! Best to do in an area without breeze or fan or much animal dander. (I use a bathroom, after a shower, so the air was cleared with the evaporating steam).
I just purchased & installed the JEtech Screen Protector "for Iphone 6-7 Inch... as Andy said below the "casing fit perfectly" and made everything fit very precisely! I don't usually add such comments, but I was truly impressed.. This is a fantastic product! Thank you!
If you follow the directions and take your time, be careful, and pay close attention not to stick your fingers where they don't belong, you will have a flawless installation.
I'm glad it worked for other people, I could not get it dust free and lifting the corner made it worse. I don't know if the dry weather makes it more likely to pick up dust. I went through all three screens and I have one tiny bubble that is driving me crazy.
Install went well, you just have to clean the screen and be ready to immediately drop the protector on to minimize dust; even then still likely to get some
It’s really nice and even for the price super good but one little think is not the bubble but I tried it 2 times and did all the steps one time I did it in normal speed and then even faster but there is still always dust under the protector
I tried all 3 and no good result. 1st applied with bubbles, second I tried without plastic mould and it was bubble free but not straight. I could not use case and 3rd time it was full of bubbles but straights. Gave up
couldn't use the first 2 because there was dust under them right after I took the peel off, the 3rd wound up with a ton of tiny bubbles toward the bottom even though it was clean and I applied as directed. wasted my money.
Alineado el protector, pero con mil burbujas…where did all that dust come from, instantly after peeling off the protective layer? Everything was clean and smooth, i was very surprised seeing all those bubbles, ya ni modo …
I tried the first time on my 13PM and I had bubbles on the top by the camera so I did it again and it worked with zero bubbles make sure to push the side when installing it
La verdad es que ha sido increíblemente fácil de poner. Me han quedado dos mini mini mini burbujas en un lateral pese a que yo no había visto absolutamente nada que las provocara. Apura bastante bien los márgenes y queda completamente centrada. Encantada, habrá que ver su resistencia
This new installation method is not good, as it allows for dust and bubbles, so don’t know why it has been changed. The old sticker method also avoided the use of the additional plastic case
Phone case was fine first had bubbles so lucky I had two more second one is okay could be better but however screen protectors for my surface pro had more bubbles then any bath I’ve ever been in very disappointed.
Worst screen protector and installation guide I have used in the last 9 years - no exaggeration. Utter rubbish, bubbles left every single time. Shop elsewhere and don’t waste your money or time.
Flawless. Make sure you get all of the dust out. Use another phones flashlight to see the dust better.
Thanks for the tip
The casing made it much easier to apply the screen protector. Very much recommend 🙏
Terrible,,too many bubbles with install..wasted 2 screens..junk...would not buy again🇨🇦
You make this so easy! Best to do in an area without breeze or fan or much animal dander. (I use a bathroom, after a shower, so the air was cleared with the evaporating steam).
Smart!
First time I've done this without airbubbles. That case makes a huge difference. Highly recommended JETech
I just purchased & installed the JEtech Screen Protector "for Iphone 6-7 Inch... as Andy said below the "casing fit perfectly" and made everything fit very precisely! I don't usually add such comments, but I was truly impressed.. This is a fantastic product! Thank you!
OMG this is the easiest screen protector I have ever applied, placed perfectly and not one bubble.
Thanks so much!!
The case is life changer. Was able to do bubble free so easily.
Thanks for the great product
Perfect product. Worked great on my iPhone 13 :)
Worked very great. No bubbles & good lookikg. I dont comment videos often but this one was worth it
worked perfectly!! i managed to overlook one little dust particle though, so really triple check if there aren’t any on your display before applying
They made it look so easy! I will attempt it now.
How’d it go?
How did it go?
If you follow the directions and take your time, be careful, and pay close attention not to stick your fingers where they don't belong, you will have a flawless installation.
Worked amazing, thanks for the awesome product!
Not too bad, but getting the bubbles and dust out was near impossible. Was able to minimize the air bubbles, but they are still there.
Flawless installation! Thanks
I'm glad it worked for other people, I could not get it dust free and lifting the corner made it worse. I don't know if the dry weather makes it more likely to pick up dust. I went through all three screens and I have one tiny bubble that is driving me crazy.
Install went well, you just have to clean the screen and be ready to immediately drop the protector on to minimize dust; even then still likely to get some
Excellent and just as easy to install as the video showed
I got the JETech Case as well and it’s just as good
My install had bubbles
same
I should of just bought spigen
It’s not the screen protector, tiny dust particles are responsible for air bubbles
@@Tech_coffeeit’s bad adhesive on screen protector you can clean all you want
pro tip is removing the back film while the glass is facing the floor to get no dust onto it
It’s really nice and even for the price super good but one little think is not the bubble but I tried it 2 times and did all the steps one time I did it in normal speed and then even faster but there is still always dust under the protector
Perfect i like it. No bubbles an very easy to place
I tried all 3 and no good result. 1st applied with bubbles, second I tried without plastic mould and it was bubble free but not straight. I could not use case and 3rd time it was full of bubbles but straights. Gave up
Best screen protector ever so easy to use
Tried 3 times with new frame - still bubbles. How to remove bubbles?
Really good video and to the point no bs
I feel like a pro after doing it lol
I always got bubbles in between cleaning and applying the screen, let’s hope this frame makes things easier
couldn't use the first 2 because there was dust under them right after I took the peel off, the 3rd wound up with a ton of tiny bubbles toward the bottom even though it was clean and I applied as directed. wasted my money.
Same exact thing happened to me, where did so much dust come from, instantly after peeling off the protective layer?🥹
Alineado el protector, pero con mil burbujas…where did all that dust come from, instantly after peeling off the protective layer?
Everything was clean and smooth, i was very surprised seeing all those bubbles, ya ni modo …
I tried the first time on my 13PM and I had bubbles on the top by the camera so I did it again and it worked with zero bubbles make sure to push the side when installing it
La verdad es que ha sido increíblemente fácil de poner. Me han quedado dos mini mini mini burbujas en un lateral pese a que yo no había visto absolutamente nada que las provocara. Apura bastante bien los márgenes y queda completamente centrada. Encantada, habrá que ver su resistencia
This new installation method is not good, as it allows for dust and bubbles, so don’t know why it has been changed. The old sticker method also avoided the use of the additional plastic case
Clear and easy installation but I don’t rlly like how the glass feels tbh
Phone case was fine first had bubbles so lucky I had two more second one is okay could be better but however screen protectors for my surface pro had more bubbles then any bath I’ve ever been in very disappointed.
Lo acabo de adquirir en Amazon, el paquete de 3, por 150 pesos mx, veamos qué tal queda !!! 👍🏼👍🏼👌🏼
Excellent for my samsung galaxy s21 plus.
Perfect installation tool
Fácil y queda perfecto!
This doesn’t have the same screen
DO NOT GET THIS FOR IPHONE 15 GET A DIFFERENT BRAND
Why
Yes, why?
Bubbles are a real problem. It is cheap and it feels cheap. I wouldn’t use it on an expensive phone like the 15 personally.
It does not fit iPhone 13 Pro. Too big!
It’s designed for the iPhone 12 Pro Max
Worst screen protector and installation guide I have used in the last 9 years - no exaggeration. Utter rubbish, bubbles left every single time. Shop elsewhere and don’t waste your money or time.
don’t buy this. all three screen protectors that i installed had no stick and left multiple airbubbles, messed up my front camera very dissappointed
Nul… ça ne marche pas comme il faut… la vitre de protection est légèrement plus grande que le support pour pouvoir la mettre 😡🤬
👍
Mine cracked when it was pushed in because it doesn’t fit wouldn’t recommend
i just got robbed
Bubbles
M A
Could do without the fucking annoying music yeah.
Horrible
Quedó perfecto :D