because of the quarantine, i had my screen protector shipped and am installing it on my own for the very first time!!! and it was 100% sucessful!! it was a little off-centre but NO BUBBLES!! in my 30 years of living, its the first time i had to put on a protector on my own and wow. i feel good!!
0:20 Before you stick the guide stickers onto the screen protector, ADJUST the position of the screen protector so that it fits the screen (and camera openings) perfectly. Then hold it down tightly, THEN sticker it down.
Wish I would’ve watched this video prior to installing my first protector. Watched this and it went on with ZERO issues. No bubbles, no dust, no fingerprints. Just follow the video exactly. Step. By. Step.
How did you install it without bubbles.. I bought but I am afraid to use it because I never did it myself and I don’t want to get bubbles + how does it work with Apple Pencil?? Does it work smoothly?
Elena Jo Yeah, I had the same fear, I install it after one week I bought it, because I’ve never be able to avoid bubbles. But this time it works great, just follow the video step by step. The Apple Pencil works smoothly too.
I just completed this installation on my new iPad Pro 12.9" and it went perfectly. I did make sure to center the protector before applying the hinge stickers, which work fairly well (but you still need to be careful during that final drop). I also used a good flashlight while hunting down dust specks.
That’s the most important part of the installation, second is the alignment. Beter use a tool if available, something like a frame. With the newer iPads it’s lots more difficult because no homebutton and less visible microphones. Quit hard to do with such a big screen.
Can’t lie, I watched this video after applying the protector. I followed zero of the instructions, just cleaned the screen and stuck the thing down. It looks completely fine. So if you’re worried, don’t be.
Installation fine, but the little red "please peal off" sticker was really hard to peel off, and left a glob of glue upon which I had to use Goo Gone. Not my idea of a clean install.
Pretty easy to install, although the stickers came off when I put the glass down on my ipad pro. Aligning the protector went well nevertheless. Good video instruction. I had to lift the glass a few times to remove bubbles, but it was the first time I applied a screen protector, so ovrall I am happy with the result now as there are no bubbles and no dust anymore :)
Came here AFTER putting my protector on my new IPad 7 - 10.2". Could not figure out why you put in the instructions to put some hinge stickers on the back of my device so I did not do that but it went alright anyway. I just lined it up as well as I could and applied the glass. Now I can see why you put that in the instructions. The instructions are not really as clear as I would have liked. I have put protectors on my phones before and had an idea how it is done beforehand.
Thanks for the nice instruction video. Im more confident in buying your product it’s in my Amazon the Netherlands basket take care greetings from the Netherlands
I’m glad I looked here. I just put the screen protector on and it went pretty well. I will buy one for the iPhone too now that I see how nice it is. 👍🏻
Well, the second application went well. I followed the instructions to the T on the first application but the protective film was on the wrong side. So then trying to switch it to the correct side (not the side shown in video) I ended up getting dust and items on it and I couldn’t use it. So that first one ended up being a waste. When I went to take the protective sticker off, I realized it was in the outside where all the hinge stickers were attached so I couldn’t pull it off. :( So with the second one I ended up following the instructions but I had to switch everything to the other side. So look first to see how they have the protective film on because it may not match up with the instruction booklet and video. I had to put all the hinge stickers on the left side of my phone and the screen protector on the left coming over to the right. Once I had everything cleaned, then I was able to peel off the protective film, then I used the lifting sticker to pull it over from left side and bring it to the right side situating it on top of my phone. It would have been a flawless application of the protective film would have been on the correct side. Love the privacy of the dark screen too!
@@seher3985 I'd say "Just Use It". I've not bothered with a protector and I can't see any scratches. If you shine a light on it and get a magnifying glass then maybe you will but nothing you can see, especially when it's turned on. Imo it's like people who buy a new sofa and leave the plastic on. If you're like me and you look after your tech, you won't have a problem. If you drop it, let 5 year old kids walk off with it and think it's cute when your cat is biting it then DEFINITELY get a protector 😅
Thank u, awesome product... if there is bubbles u lift the tab very slowly and carefully and very slowly and gently place it back down and it will be flawless...I saw bubbles and was like well it’s ruined but you can fix it ... use manual and this vid
If anyone didn't know like i did, that transparent pocket it comes in is not part of the instructions. Take it out of that sleeve. Spent a good 15minutes scratching my head. My only regret which I will be patient to see if the dust doesn't leave those few bubbles. But otherwise, its not just good to apply the alcohol, but make sure its wiped clean with the rag, then use that damn blue thing once over to get any dust but all of a sudden you'll see them just pop up as bubbles with a tiny dust particle.
So, I've got the bubbles in the middle that won't move. Evidently have invisible dust particles in them. I need to start over, how do I remove the protector? They're right in the middle so I cannot live with them.
This installation visual is excellent. The stickers that came with my JETech screen protector were too removable, though, and really didn’t function as intended. One hinge sticker came completely unstuck during the final placement of the protector. That started a series of mishaps that led to bubbles. Had to start completely over. Several times. Not ideal, to say the least. Finally got it installed with just one very small bubble in the upper left. This is not my first rodeo, by any means, and I’ve never had this much difficulty installing. Don’t recall what brand(s) I’ve used previously, but the stickers always actually stuck to the protector the other times, so as long as I’d positioned everything well, the process was fairly simple.
How can I remove the old screen? The first one I installed about 2 years ago crashed and I just got a new one, But I don´t know how to take it off to put the new one.
I followed ALL the steps but it just didn’t turn out so well for me so I just have to place it on by myself without those sticker thing because it keeps on falling
Does anyone know what he used to pick up the dust before he puts the screen on? I see that there are dust stickers to pick it up but I’m not sure how he folds it together to pick it up like in the vid
followed the instructions but when i lifted a corner to remove a piece of dust, the corner deformed and now there is a permanent bubble of air trapped under it 😬 so yeah, don’t lift the corners like they did - i did it gently and it still made a mess of things
Hice todo como en el video y bien, pero cuánto esperar para que se adhiera bien? Por que al apretar el botón de encendido del iPad se ve como si entrara aire entre el protector y pantalla.
tried this method yesterday.. And long story short it does not work. The guide stickers peal. Perhaps use sum packaging tape or duck tape..i don't know .. If you try this method and put a heavy 12.9 inch slab of glass next to it and try to flip it over .. it will fail.. i have no idea how these folks managed to do it.. ESR provides you with a plastic frame.. i'm going to give them a try and see if it works..
Mine went on fine, but the protector had 2 small areas that did not stick... I lifted a few rimes and those same random small circles would not stick. They were not air bubbles. I am very disappointed in this product.
Guys if you care about the tip of your apple pencil don't get this. I use my iPad at least 5 hours per days to study and write down notes. It consumed my pencil in a week and I had to change the tip.
Hat leider überhaupt nicht geklappt. Die beiden Aufkleber lösen sich zu leicht beim abziehen der Folie, habe 3 weitere Aufkleber genommen. Folie Nr. 1 zerschossen weil halt doch wieder Staubkörner unter die Folie kamen und man die mit dem kleinen Tuch nicht wegbekam. Im Gegenteil: So landeten noch mehr Flusen auf der Folie. Leider wird auch nicht beschrieben das eine gründliche Vorreinigung erfolgen sollte, da die Folie ja schon vor dem eigentlichen Aufkleben auf dem Bildschirm aufliegt. Wer also nicht sehr gut handwerklich begabt ist (ich bin es definiv nicht :-) sollte das jemanden überlassen der weiß was er tut. Habe zum Schluss auch gemerkt das es ohne die ganzen Helferlein sicher besser "per Hand" geht. Dieses Video auf jeden Fall ganz! bis zum Schluss gucken, da die bebilderte Beschreibung nicht so umfangreich und detailiert ist. Habe auch jetzt noch 2 Blasen auf dem Gerät die ich aufgrund von Staubkörnern nicht mehr wegbekomme. Bestell aber keinen 2. Satz nach. Fazit: Sicherlich sehr gutes Produkt das aber durchaus vorraussetzt das man das schon 5-6 mal gemacht hat ;-)
I didn't know ow if I could do it be a case I was only a kid and never did it before and got the protector on d(￣◇￣)b💯ᵖᵉʳᶠᵉᶜᵗ and on attempt to 4 and got it so I showed my mother
I prefer talking in the videos. Go slower please. When I peeled off the protector, the glass is sticky. It really bothers me. It is not glass, it is plastic.
because of the quarantine, i had my screen protector shipped and am installing it on my own for the very first time!!! and it was 100% sucessful!! it was a little off-centre but NO BUBBLES!! in my 30 years of living, its the first time i had to put on a protector on my own and wow. i feel good!!
How?
0:20 Before you stick the guide stickers onto the screen protector, ADJUST the position of the screen protector so that it fits the screen (and camera openings) perfectly. Then hold it down tightly, THEN sticker it down.
Wish I would’ve watched this video prior to installing my first protector. Watched this and it went on with ZERO issues. No bubbles, no dust, no fingerprints. Just follow the video exactly. Step. By. Step.
Thank you, it's the first time in my life that I was able to install correctly and without bubble the screen protector
How did you install it without bubbles.. I bought but I am afraid to use it because I never did it myself and I don’t want to get bubbles + how does it work with Apple Pencil?? Does it work smoothly?
Elena Jo Yeah, I had the same fear, I install it after one week I bought it, because I’ve never be able to avoid bubbles. But this time it works great, just follow the video step by step. The Apple Pencil works smoothly too.
Domenico Pronestì Okay 👍🏻 I will try to do it + thanks for replying 🌷
I just completed this installation on my new iPad Pro 12.9" and it went perfectly. I did make sure to center the protector before applying the hinge stickers, which work fairly well (but you still need to be careful during that final drop). I also used a good flashlight while hunting down dust specks.
Yea
That’s the most important part of the installation, second is the alignment. Beter use a tool if available, something like a frame. With the newer iPads it’s lots more difficult because no homebutton and less visible microphones. Quit hard to do with such a big screen.
Perfect, since I'm a visual learner and could pause it every few seconds. One try and done!!! Thanks so much.
Congratulations! Best video I found, which has no absurdly illogical actions or succession of actions.
I've used multiple screen protectors on my iPad Pro 12.9 inch. This brand is head and shoulders above others!
This is a very good product. The attention to detail is great and the video is good also. Thank You. You have my future business.
Bought this for ipad pro 12.9 inch
Super cheap and amazing quality. Applied perfectly, Really happy! Thanks.
Do you have any problems when using the Apple Pencil?
@@elenajo8760 No its support pencil
Jtech awesome product!! Making installation of glass protector so much easier..it's perfection!
Wow! That’s the best screen protector installation I’ve ever seen!!!
This video really helped. Just follow the steps carefully as shown in the video.
Can’t lie, I watched this video after applying the protector.
I followed zero of the instructions, just cleaned the screen and stuck the thing down.
It looks completely fine. So if you’re worried, don’t be.
I did the same and no issues. Lol
VERY SIMPLE install steps! When I opened and looked at all the stickers I was like...uh ohhh. However SUPER SIMPLE!!! Thanks!
Easier than following written instructions
Installation fine, but the little red "please peal off" sticker was really hard to peel off, and left a glob of glue upon which I had to use Goo Gone. Not my idea of a clean install.
Pretty easy to install, although the stickers came off when I put the glass down on my ipad pro. Aligning the protector went well nevertheless.
Good video instruction. I had to lift the glass a few times to remove bubbles, but it was the first time I applied a screen protector, so ovrall I am happy with the result now as there are no bubbles and no dust anymore :)
I've watched at least 20 of these installation videos. This is definitely the best.
I love this video, it was so helpful. I was terrified of messing up. This really makes it easy, and I love the product.
Hello i was your 1,000 Subscriber and i bought your product of amazon and it was amazing
... OMFG! ... the best and simple video ...
Excellent guide, thank you, building on the good instructions from Jetech themselves.
I did it!!! I did it!!!. I am so proud of myself!!! Thank you !!! ❤️🤗😁👍🔥✨
Thank you very much! I was a little confused on the directions and this cleared things up
Same here. I had no idea what eas the point of the hinge stickers. This makes sense now.
Came here AFTER putting my protector on my new IPad 7 - 10.2". Could not figure out why you put in the instructions to put some hinge stickers on the back of my device so I did not do that but it went alright anyway. I just lined it up as well as I could and applied the glass. Now I can see why you put that in the instructions. The instructions are not really as clear as I would have liked. I have put protectors on my phones before and had an idea how it is done beforehand.
Thanks for the nice instruction video. Im more confident in buying your product it’s in my Amazon the Netherlands basket take care greetings from the Netherlands
I prefer am film, also on Amazon,
I’m glad I looked here. I just put the screen protector on and it went pretty well. I will buy one for the iPhone too now that I see how nice it is. 👍🏻
Best tutorial hands down
That's one of the best applications I have seen by far
Well, the second application went well. I followed the instructions to the T on the first application but the protective film was on the wrong side. So then trying to switch it to the correct side (not the side shown in video) I ended up getting dust and items on it and I couldn’t use it. So that first one ended up being a waste. When I went to take the protective sticker off, I realized it was in the outside where all the hinge stickers were attached so I couldn’t pull it off. :(
So with the second one I ended up following the instructions but I had to switch everything to the other side. So look first to see how they have the protective film on because it may not match up with the instruction booklet and video. I had to put all the hinge stickers on the left side of my phone and the screen protector on the left coming over to the right. Once I had everything cleaned, then I was able to peel off the protective film, then I used the lifting sticker to pull it over from left side and bring it to the right side situating it on top of my phone. It would have been a flawless application of the protective film would have been on the correct side. Love the privacy of the dark screen too!
Just make sure the red tab is facing down. I first followed the tab on the top right like the video but it was backwards
works well, makes screen more slippy, not good for pencil, will mess up when you put ipad in case though,.
So it doesn't work with the pencil?
@@jonathanmissael12 it works but it feels very slippery whereas the glass has more friction. It doesn't feel right basically. All my opinion.
Xbot4Life this was my biggest concern, that it’ll be more slippery if i put it on... but then i don’t want scratches so i can’t win either way
@@seher3985 I'd say "Just Use It". I've not bothered with a protector and I can't see any scratches. If you shine a light on it and get a magnifying glass then maybe you will but nothing you can see, especially when it's turned on.
Imo it's like people who buy a new sofa and leave the plastic on.
If you're like me and you look after your tech, you won't have a problem. If you drop it, let 5 year old kids walk off with it and think it's cute when your cat is biting it then DEFINITELY get a protector 😅
Thank u, awesome product... if there is bubbles u lift the tab very slowly and carefully and very slowly and gently place it back down and it will be flawless...I saw bubbles and was like well it’s ruined but you can fix it ... use manual and this vid
hat super funktioniert mit der Anleitung, danke
Thanks, this was SO helpful!
The stuff u sell is amazing I bought one of them recently
Good job! Happy New Year
Thank you so much....look easy but I'll try 😂
If anyone didn't know like i did, that transparent pocket it comes in is not part of the instructions. Take it out of that sleeve. Spent a good 15minutes scratching my head. My only regret which I will be patient to see if the dust doesn't leave those few bubbles. But otherwise, its not just good to apply the alcohol, but make sure its wiped clean with the rag, then use that damn blue thing once over to get any dust but all of a sudden you'll see them just pop up as bubbles with a tiny dust particle.
I did it! I was so afraid of screwing it up!
Once you out a case on it’s hard to get rid of the air bubbles
I need two Glases for two attempts on the 3 it works
I tried peeling back the cover as described at 2:10, but it didn't reseal as shown in the video. Everything else worked as described.
Thank you for this video. It was SUPER helpful!
So, I've got the bubbles in the middle that won't move. Evidently have invisible dust particles in them.
I need to start over, how do I remove the protector?
They're right in the middle so I cannot live with them.
I ordered mine on amazon! Arrives tomorrow! Hope I can remove this without residue?
Jabroni Corleone what do you think about this ? I hesitate....
What do you think about this screen protector please ?
Pierre Parera it's a good one. I am using it on my iPad 9.7!
thanks a lot for this video I managed to do it without any bubbles and im so clumsy !
Did you face any problems when using Apple Pencil?
@@elenajo8760 not at all
David Hill okay thanks 😄
i followed the tutorial and got my shield with no bubbles
Just installed mine on my iPad Air. Looks great!
Very helpful tutorial and a fantastic product
This installation visual is excellent. The stickers that came with my JETech screen protector were too removable, though, and really didn’t function as intended. One hinge sticker came completely unstuck during the final placement of the protector. That started a series of mishaps that led to bubbles. Had to start completely over. Several times. Not ideal, to say the least. Finally got it installed with just one very small bubble in the upper left. This is not my first rodeo, by any means, and I’ve never had this much difficulty installing. Don’t recall what brand(s) I’ve used previously, but the stickers always actually stuck to the protector the other times, so as long as I’d positioned everything well, the process was fairly simple.
Does this Screen protector cause any issues with using Apple Pencil ?
Does it ?
Elena Jo it doesn’t!
Jonathan Larracuente 🌚 okay thanks
Messed up the installation, because the sticker were wrong attached....
How can I remove the old screen? The first one I installed about 2 years ago crashed and I just got a new one,
But I don´t know how to take it off to put the new one.
Lillian Espinosa Just put it off with your nails!
@@nzkers6666 thank you very much !!
Thanks!
i bought one of your phone cases of amazon yesterday
Can anyone tell me if the screen protector works with a case on the iPad
- sehr gut‼
I did this on my iPad mini 2 and I’m happy 😊 I have a lot of air bubbles but that’s because my screen is extremely cracked
I followed ALL the steps but it just didn’t turn out so well for me so I just have to place it on by myself without those sticker thing because it keeps on falling
Does anyone know what he used to pick up the dust before he puts the screen on? I see that there are dust stickers to pick it up but I’m not sure how he folds it together to pick it up like in the vid
Can i use ordinary tape instead to stickers?
followed the instructions but when i lifted a corner to remove a piece of dust, the corner deformed and now there is a permanent bubble of air trapped under it 😬 so yeah, don’t lift the corners like they did - i did it gently and it still made a mess of things
Emily Haworth i tried lifting one side and it worked just fine
Sara Bautista it was because I deformed the corner
perfect no bubbles are left
Hice todo como en el video y bien, pero cuánto esperar para que se adhiera bien? Por que al apretar el botón de encendido del iPad se ve como si entrara aire entre el protector y pantalla.
Entonces no lo instalaste bien jajajaja
@@slenderjake5301 después de diez meses, parece que si, porque no he tenido problemas.
Does it make the screen have a grain effect ? Or no
Is that screen protector matte? Or clear screen
Thank you for this tutorial !
Does this work with Apple Pencil gen 2
tried this method yesterday.. And long story short it does not work. The guide stickers peal. Perhaps use sum packaging tape or duck tape..i don't know .. If you try this method and put a heavy 12.9 inch slab of glass next to it and try to flip it over .. it will fail.. i have no idea how these folks managed to do it.. ESR provides you with a plastic frame.. i'm going to give them a try and see if it works..
Mine went on fine, but the protector had 2 small areas that did not stick... I lifted a few rimes and those same random small circles would not stick. They were not air bubbles. I am very disappointed in this product.
Me funcionó gracias
Guys if you care about the tip of your apple pencil don't get this. I use my iPad at least 5 hours per days to study and write down notes. It consumed my pencil in a week and I had to change the tip.
Thanks
OMG, smart!
What brand glass?
so convenient
When you didn’t get the dust remover and everything 🤠🤠
hi,Got a bubble at the corner and won't go. Any idea on how to get rid of that? Otherwise all okay.
Parvis M.ASLAM i would re apply and wrap a credit card in a soft cloth and squeegee and push the air outwards.
@@100111001100110 Thank you Leo.it worked.
Yeah i know when i do it its not going to go that smoothly
Hat leider überhaupt nicht geklappt. Die beiden Aufkleber lösen sich zu leicht beim abziehen der Folie, habe 3 weitere Aufkleber genommen. Folie Nr. 1 zerschossen weil halt doch wieder Staubkörner unter die Folie kamen und man die mit dem kleinen Tuch nicht wegbekam. Im Gegenteil: So landeten noch mehr Flusen auf der Folie. Leider wird auch nicht beschrieben das eine gründliche Vorreinigung erfolgen sollte, da die Folie ja schon vor dem eigentlichen Aufkleben auf dem Bildschirm aufliegt. Wer also nicht sehr gut handwerklich begabt ist (ich bin es definiv nicht :-) sollte das jemanden überlassen der weiß was er tut. Habe zum Schluss auch gemerkt das es ohne die ganzen Helferlein sicher besser "per Hand" geht. Dieses Video auf jeden Fall ganz! bis zum Schluss gucken, da die bebilderte Beschreibung nicht so umfangreich und detailiert ist. Habe auch jetzt noch 2 Blasen auf dem Gerät die ich aufgrund von Staubkörnern nicht mehr wegbekomme. Bestell aber keinen 2. Satz nach.
Fazit: Sicherlich sehr gutes Produkt das aber durchaus vorraussetzt das man das schon 5-6 mal gemacht hat ;-)
Does it interfere with the wake sleep function on a covered iPad screen?
No
Wow
longest 2 minute video
I didn't know ow if I could do it be a case I was only a kid and never did it before and got the protector on d(￣◇￣)b💯ᵖᵉʳᶠᵉᶜᵗ and on attempt to 4 and got it so I showed my mother
Great video but the actually having to put it on is a major challenge
I prefer talking in the videos. Go slower please. When I peeled off the protector, the glass is sticky. It really bothers me. It is not glass, it is plastic.
After 10 minutes of following each steps, and then there's a sneaky tiny particle just fly on the wiped screen....
Terrible Bubbles!!!
A X. H
Très chiant à mettre
This crap came cracked. Dont use this garbage