BOSCH washing machine E18 Error Code (blockage in the filter) EASY FIXING
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Hi again!
I want to show you a potential problem, if your washing machine shows the E18 Error Code, this is how can you fix it.
Thanks for watching, see you on the next one!
Music 🎶
Music: Early Hours
Musician: @iksonmusic
This worked for us on a series 4 Bosch, I pulled a much smaller lump of general fluff & limescale than came from yours in the video, but it was enough for ours to come back to life. Thank you so much! 🙂
That’s great!👍
Thank you so much for the timely saviour video!! Lots and lots of thanks. Really great and useful!
Thanks, I’m glad you liked.
Thank you so much sir, from France 🇲🇫🙏
Thanks mate! 👍
Great video👍 I have the E18 problem and when opening the filter the water flows out, not drips. Next time I run the machine the E18 re-appares. What could be wrong?
Hi! Unplugged the waste water outlet and discovered a button and lots of fabric that most certain hinderd the water to flush out. Running a testwash now. 🙏
Hi,
May slowly the water can pass through blockage, but when quickly needs to let the water out it won’t work. If a hairpin block the pump and open the filter water will flow, as hairpin is a small object, but don’t allow the pump to work. I’d recommend to check the filter/ pump/ tubes thoroughly.
Thanq for sos tips .Hhiii.
@@henkeboy1317thanks! I had the same issue as you and also found a button and junk in the outlet!
You saved me! I watched it, I fixed it!! Thank you!!
Nice work 😉👍
This video was a saviour.....thank you so much....
Thank you for your feedback!
Hi, I am unable to unscrew the plastic cap there. It is too tight or something is blocking it. Any ideas on how i can do it?
Hi,
Probably something blocked the cap. If you cannot remove it, need to take off the drain pump. When removed all tubes may you can see what has stuck there and can clean out. Then you just need to return the pump.
Please let me know if you need any help.
@@georgesworkshop8600 Thanks, Can you help me with steps to remove drain pump?
Hi,
I don’t have video to remove pump on Bosch washing machine, but I have on a Hoover Washing machine. The method is same, so you can follow the instructions .
Please check my video “ Hoover washing machine E03 Error Code. ( blockage in the filter)”
th-cam.com/video/9EUCf6UNG6o/w-d-xo.html
I hope that will help
Thank God n then you also hv come to my rescue n my washer has come on line with life.
Thank you for sharing your experience!
Thank you so much 🙌 it's working fine 🎉
You're welcome!👍
Çok teşekkür ediyorum çok yardımcı oldunuz?!? Teknikservis 80 tl gelecekti gerek kalmadı .Vielen Dank Tenk you
👍
This is awesome about to fix my bosh
Thanks Aubrey
thank you so much
You're welcome! ☺️
This video saved me, thank you! 😊🙌
I glad to help
Thanks for your help 😊
You are welcome
Thank you I've just saved 500 quid thanks
I’m glad if I could help. See you in the next video
@@georgesworkshop8600 you did funny story order a new Bosch off amazon and they cancelled my delivery and the day it was due I give it another go works fine i fixed the filter over and over couldn't get anything up there I just need to get a wall tie from work now ha thanks again
Well done, good job!😜👍
Thank you so much❤
Thanks!
Thanks a lot for the help 🙌👍
Hi Rob,
Thanks for your feedback
Thank you for your feedback! Good job! If you like my video I would much appreciate if you could support my channel. Many thanks!
Great stuff! Fixed it!
Congrat!
My washer fin it's last wash, but since then it keeps flashing lock (key) symbol an going to 0 ? I've tried all obvious things 🙃 could I fix this myself ?
Hi Adele,
My first thought would be the child lock, this is normally 2 buttons combination. If not this, I ‘d say the door lock needs attention.
Though we cleaned everything it is showing the same error again😢
Hi,
You should check the filter again. May something that was stuck deeply has moved after you previously cleaned it.
Big like for you, other wise i would spend 100 euro for reparation
I’m glad to hear that
Thank you for your feedback! Good job! If you like my video I would much appreciate if you could support my channel. Many thanks!
Hi thanks for this. I have just tried it and I am still getting error E18. I also cannot get the machine open. Please help.
Hi Sari,
Please unplug your machine and a few minutes later the door will be available to open, even the door opener us not broken.
It must be a blockage somewhere around the pump or in the tube that join the drum and the pump. Usually black colour and around 5cm diameter.
@@georgesworkshop8600 thank you so much for your reply George. I tried it again on Saturday and there was indeed something still stuck in there. All is working fine now and no need to pay an engineer! Thank goodness for your video!
Thank ful video
Did you find useful?
our machine is showing e18 but the water drain has been struck how to remove it
Hi,
Do you mean the pump damaged? Or do you presume there is a blockage somewhere?
Hi,
Do you mean the pump is damaged and need to be replaced or there is a blockage?
Cheers
Thnk you
Thank you
You’re welcome
You saved me thanks and subscribed 🙏
I am so glad to hear that!
Thankyou soooooooo much 👍🏻👍🏻👍🏻
You’re welcome, I hope you found my video helpful.
Thank you saved me
Hi,
I’m glad you found useful my video
Thanks man
You’re welcome
Do you know how can open this one i trying many times can't very hard .. show me how to do
Hi,
The filter could be opened anti clockwise. It’s hard to turn it and probably you did correctly, but the object that caused the blockage has stuck and not allow you to turn it. You need to take off the pump, otherwise you will broke the filter’s door. I have a video for a Hoover washing machine blockage in the filter. You can watch this video how to do.
Good job
Hey ive done this & heaps of water came out but its still showing the code??? I dont know what to do?? Please help
Hi! Are you sure everything came out? You can try to unplug your machine and leave for 10 minutes, then plug in. May this will help.
Check the waste water outlet. Could be plugged with fabric.
Thanks a lot for dis vedio
Your welcome 😉
Hi our machine is snowing error 17.can you tell me what is problemm ?
Hi,
I looked into and found out this means the inlet pipe is blocked and no water in the machine. There is a little filter where you join the pipe to the machine. Remove the pipe and clean the filter.
I hope this will help. Good luck
Showing not snowing😂😂
@@georgesworkshop8600 ok thanks I will try
Thanks!!!!
I am glad to help
My beko machine do that,i start it..all show working,but when i press start to run nothing happens…sometimes start after 10 minutes..but todat i tryed to wash but this time dont run..i wait more then 30 minute.nothing,what i can do?
Hi,
How old is your washing machine? Has it been used lot?
@@georgesworkshop8600 my girlfriend used every week…maybe twice a week..i just ordered a new door lock …maybe will work if i replace it..because before used to make a door sound and after door was block,but now dont happen that
Hi Cristian,
I hope the door lock replacement will help, if not my guess is that, the carbon brush is maybe too worn or stucked.
Please let me know, if you could fix it.
@@georgesworkshop8600 was door lock part.i replaced it and all works now 👍
Great , congratulations 👍
How do I reset the sensor?
Hi James,
What sensor do you mean? I don’t know any sensor in washing machine. Is it in tumble dryer?
I've cleaned the filter thoroughly but still getting the Er 18 code coming up?
I assume there's a sensor to be reset or how does the error reading come about?
Sorry for the late response, there is no sensor, the error message is automatically deleted if the problem was solved. Did you check the waste pipe? May that is blocked and cause the issue. Or check the pump, it could be there a blockage. Like a stuck hairpin, plastic, coin and cannot come out to the filter.
Сработало
Machine shows e26, whats it??
Hi,
Google says:
This error code indicates a faulty analogue pressure sensor in your machine, which identifies how much water is in the machine. Any fault with this sensor stops the machine working efficiently and will need to be attended to.
I hope this will help.
The water is disgustingly dirty!! That wash needs multiple washes and rinses!!
Ewwwww
The blocked water will mature in a short while. When filter has cleaned good to run a high temperature wash.
@@georgesworkshop8600 yes I discovered that it created an odor too despite the clothes being properly washed (as they were trapped inside), and THANKS to you and your video I eventually found the culprit!! However it took emptying manually the machine several times till I finally found the hair tyes which was back breaking using tube to manually remove excess water. THANK you 🙏💟
E o o error koode
Hi. The E00 code does not indicate an error, but a positive result that the washing machine gives as a result of service testing. In other words, a washing machine Bosch tells us that the service test is passed, there are no errors.
Regards
George
Bosch is such trash 👎👎
Hi, not same as it was before
Thanks you
You’re welcome
Thanks Dude
No problem 😉