I have heard a lot of nice things about Krause. I like your ideas with the wolf one set up. Have you guys ever thought about having an optional wolf one gauge mount that sets the gauges a little lower on the handlebars instead of right in the middle?
Would be nice to put these on the FRONT of the bars BUT it would interfere with the road glide standard's fuel tank access when you pour gas. I like being able to see my handlebar and clamps as they are actually good looking. Putting the gauges on the BACK of the handlebars will block some of the boom screen, as mentioned in this video. Harley needs to change up the fuel access on the RG standard like it did for the RG special. I love the riser and bar set up. Looks great and super comfy
depends on height of risers. I have this setup with 8" risers and theres not enough room to mount gauges in front. I think 10" or more and you should be ok.
Sorry, we do have a couple newer team members in training. Please ask for the Horsepower Team next time 615-274-4170. If you email us your phone number one of us will call you to discuss. Email: Horsepower@moonshineharley.com
Nice looks good can you turn the handlebars without your opposite hand falling off the handlebars do they come back far enough for you to be able to do all kinds of manoeuvres and in tight situation
I ordered your kit from your website and received the kit. As I couldn't find the lower lower bottom tree clamp from your website to complete the kit I ordered the lower wolf tree from Kraus direct. During the install I couldn't install the lower traa to the top as the Yoke supplied from Kraus is about 1mm thicker. Do we have to purchase a different yoke nut? So for the time being I have installed the stock lower bottom tree until I can try I figure out a solution.
Is the radio very visable with your setup? Also i have a 37” sleeve length and is it worth me getting a pullback? I like to ride with my elbows slightly bent. Im stuck on what size risers i should run.
Great looking product fellas. Curious what the mirrors are on the RG with your new gauge demo? Love the channel and keep up the awesome content! Big fan from Canada.
Although this looks different than many other builds I don’t understand why you’d want to cut off view of your screen. Do you really need a separate gauge cluster? Might be for some but I’ll pass.
couple of questions. On the stock top of tree there is a ground wire.. where does that go on the Krauss tree? There does not appear to be a spot for it. Second question.. when reinstalling the forks.. how far past the top of the tree should the fork go?
i have this setup and spoke to others and you don't need the ground wire. if you are replacing the stock top clamp with the Kraus, take a pic and mount in same position.
@@richesposito9384 there was a screw going into the stock tree mount that is not on the Krauss tree. Not sure what to do with that wire and plug.. its kinda a weird set up. Thanks for the reply
Thank you. I am a 5.6" rider and my current bar setup is a KST 12" spearhead bar. My arms are slightly bent when in the riding position. Which one of these kits would work for me?
@@MoonshineHarley Thank you for the quick response. I will call later today to discuss options. I am planning on visiting the dealership so I can sit on a bike with the bar setup before I decide. I have never seen another bike like mine with T-bars.
@@MoonshineHarley, I'm interested in the 8" risers. I almost bought the 10" methods before I saw this video. Do you think the fuel door on top of the dash will have clearance with an 8"? It's a 2019 RGS, the specials then still had the old style dash.
@@MoonshineHarley That was a super fast response. I looked on the website and only saw the option to purchase the entire Wolf One kit. No option to purchase just the gauge/riser clamp. I'll shot an email to the shop
Team HP: Congrats on your new product release
Thanks JR
You are a top service shop thanks for your dedication
Friggin genius!
Always the best info videos..great new product
nice professional presentation.
I have heard a lot of nice things about Krause. I like your ideas with the wolf one set up. Have you guys ever thought about having an optional wolf one gauge mount that sets the gauges a little lower on the handlebars instead of right in the middle?
I love it
100% love it
I LOVE IIT
All those parts etched with visible company logos..... seems buyers should get a monthly stipend for the advertising.
Would be nice to put these on the FRONT of the bars BUT it would interfere with the road glide standard's fuel tank access when you pour gas. I like being able to see my handlebar and clamps as they are actually good looking. Putting the gauges on the BACK of the handlebars will block some of the boom screen, as mentioned in this video. Harley needs to change up the fuel access on the RG standard like it did for the RG special. I love the riser and bar set up. Looks great and super comfy
Change your tank over. Get most money back selling your old tank
@@extremebaggers7817 good idea. Easy fix
depends on height of risers. I have this setup with 8" risers and theres not enough room to mount gauges in front. I think 10" or more and you should be ok.
@@richesposito9384 im 6'2 and would need my bars around 14" high. Think ill be able to squeeze the gas pump in just barely
good idea but still no kit for similar bars without compromising the gauges or the radio screen!
I called the shop trying to get a quote on a Kraus T-bar installation, was transferred to parts, who didn’t know. 🤷♂️
Sorry, we do have a couple newer team members in training. Please ask for the Horsepower Team next time 615-274-4170. If you email us your phone number one of us will call you to discuss. Email: Horsepower@moonshineharley.com
Nice looks good can you turn the handlebars without your opposite hand falling off the handlebars do they come back far enough for you to be able to do all kinds of manoeuvres and in tight situation
Kinda seems like those would vibrate like crazy the farther you raise them on those stalks.
No vibration issues. The poly riser bushings are under the bars and gauges.
I ordered your kit from your website and received the kit.
As I couldn't find the lower lower bottom tree clamp from your website to complete the kit I ordered the lower wolf tree from Kraus direct.
During the install I couldn't install the lower traa to the top as the Yoke supplied from Kraus is about 1mm thicker.
Do we have to purchase a different yoke nut?
So for the time being I have installed the stock lower bottom tree until I can try I figure out a solution.
Does your solid gauge mount bezel fit the Dakota Digital gauge pod?
can these fit on a Roadking Special?
1.5” diameter bar would be sik
Is the radio very visable with your setup? Also i have a 37” sleeve length and is it worth me getting a pullback? I like to ride with my elbows slightly bent. Im stuck on what size risers i should run.
Can you turn the bars with out You are opposite arm falling off the handle grip
Great looking product fellas. Curious what the mirrors are on the RG with your new gauge demo? Love the channel and keep up the awesome content! Big fan from Canada.
Harley-Davidson Rizoma mirrors.
Thanks a bunch!
What size bars and risers are on the solid mount kit in video?
12.5 total 10” pullback risers with 2.5” Fly bars. You can purchase at shop.moonshineharley.com > click MHP Parts
Although this looks different than many other builds I don’t understand why you’d want to cut off view of your screen. Do you really need a separate gauge cluster? Might be for some but I’ll pass.
This setup is for those that want quick view of gauges. Lookin to far down isn’t as easy or safe while pushing the motorcycle.
What’s the highest set up you can go with Kraus t bar
What bars?
Does the wolf 1 kit come with the ERG bars?
couple of questions. On the stock top of tree there is a ground wire.. where does that go on the Krauss tree? There does not appear to be a spot for it. Second question.. when reinstalling the forks.. how far past the top of the tree should the fork go?
i have this setup and spoke to others and you don't need the ground wire. if you are replacing the stock top clamp with the Kraus, take a pic and mount in same position.
@@richesposito9384 there was a screw going into the stock tree mount that is not on the Krauss tree. Not sure what to do with that wire and plug.. its kinda a weird set up. Thanks for the reply
@@skulldaddy8431 yea if its the ground you can toss it. you don't need it
Thank you. I am a 5.6" rider and my current bar setup is a KST 12" spearhead bar. My arms are slightly bent when in the riding position. Which one of these kits would work for me?
If your bars truly measure 12” and you like them I would go with the 12.5” setup. It would be a 8 inch kickback riser with 2.5” Fly Moto bar.
@@MoonshineHarley Thank you for the quick response. I will call later today to discuss options. I am planning on visiting the dealership so I can sit on a bike with the bar setup before I decide. I have never seen another bike like mine with T-bars.
@@MoonshineHarley, I'm interested in the 8" risers. I almost bought the 10" methods before I saw this video. Do you think the fuel door on top of the dash will have clearance with an 8"? It's a 2019 RGS, the specials then still had the old style dash.
What video shows this set up on a Street Glide. ?
Hey, can you do these bar kits on a soft tail? Like a Low Rider S or a Fat Bob?
I’ve seen them do it on builds but no explanation on if the wiring is the same or if they spliced the two harnesses together 🤷♂️
Would I need to extend the brake line and throttle wire with the 14.5 or the 12 inch kit?
Yes definitely
I've had both 14.5 and 12 inch Kraus setups on 22 Road Glide. Didn't have to extend them.
Could you not make it digital like the street bob?
Dakota Digital makes a digital replacement gauges for this setup.
If I already have the Kraus Wolf 1 setup on my RGS, can I purchase just the solid gauge mount?
Yes. We designed the solid mount gauge kit to have the gauge mount and wire extension. This setup was made for riders that already had a Wolf One Kit.
@@MoonshineHarley That was a super fast response. I looked on the website and only saw the option to purchase the entire Wolf One kit. No option to purchase just the gauge/riser clamp. I'll shot an email to the shop
Did you have to remove your ignition switch? Or is it good
How about low rise (risers) & standard ape hangers????
Really want to do a roadglide fairing delete with a road king nacelle
Maybe my local machine shop could cut the risers down
🎯🎯🎯👍🏿👍🏿👍🏿💯💯💯
What happens to the ignition switch with this setup?
It’s deleted and they reprogram the switch to the upper right switch box.
Can you guys build a bar set up with these wired and ship it to me?
We can ship but you’ll have to run your wires. These bars are easier than most since they don’t have any real hard bends.
i have this setup and it was super easy to wire the bars
Why anyone would want these bars on a Road Glide or a Street Glide is nonsense but some people like total nonsense lol.