Bust out the air hose for cooling down your welds like Chad does so you don't warp that roof. You're doing good man, I like it! My advice is let the haters be your motivators. 👍😉✌
Let’s just say if it fails.. and it falls apart in my garage before i finish. Then I will have failed and I will be wrong. Is it fair to say if when I’m done and inspected and determined to be safe for the road.. does that make you wrong or just difference of opinion?
Looking good. The passenger side rear ofthe roof corner looks a little higher. Has more of a curve than drivers side. Very impressed how you did the roof. :)
Thanks! I’m thinking of adding a tube across the roof at that point, because the roof sheet is still very flexible and I’m thinking if I roll the tube I can make the roof fit better and match both sides.
🇳🇴 The roof is taking shape. I like the the way you curved the roof in the back. Gonna look good. Still afraid the roof is to tall,but i hope i am wrong. You are werry talented in what you do.
It reminds me of the Dodge Arrow which was similar to B210 Datsun. The bolt pattern on the Jaguar for the wheels are 4 3/4 like Chevy (just a note) Looking good man!!! It’s maybe possible to use the trunks outer layer of metal to help shape the the roof and beyond.
I am almost thinking you should have made the roof drop down a couple of inches further forward, as in making the front straight piece of the bended bar shorter
I like the drip rail going back on. The roof is taking shape nicely. Also I admire your fine work.
Thank you very much!
I am trying to picture it with the glass in. Maybe on your next video we can see a picture of how it’s going to look finished 👌👌👌🏴🏴🏴
Awesome progress awesome video looking great !!!!
Thanks 👍
I,m liking the way the roof co-operated and followed down the curve so nice.. Great work there... This build is coming along great!!!
Thanks a lot!
Looking so good Gordon. Really liking the shape. Great job
Thanks!
You definitely a metal fabricator on the jagord!
All in good fun! Thanks for watching!
Plow frame looks “ professional “! 👍
Thanks 👍
Very nice metal work. I like your vision. Dang now I want to stop working on my car and find something to chop up lol
Ha! Yup it’s definitely fun!
Bust out the air hose for cooling down your welds like Chad does so you don't warp that roof. You're doing good man, I like it! My advice is let the haters be your motivators. 👍😉✌
Bad Chad is the biggest hack on the internet. There a reason why none of his cars a plated for road use.
Fake news ☝️ probably like a 3 mask kinda guy. 😁✌
Yes! I definitely do that when I’m welding, and true at least I’m trying something! Thanks for watching!
Looking good ,your gaining ground,big project for 1st time. 👍
Thanks! And yes it’s a bit of a undertaking!
It's starting to look good keep at it
Thanks!
Nice work. For a guy that's never altered a roof before that's pretty impressive.
Thanks! I’m not an expert just been watching others and trying my best!
Looking really nice, it s going to be cool 😎
I think so too!
Good job done, it's looking good mate, keep up the great content, looking forward to your next video
Thanks very much!
WHAT AMAZING JOB VERY INTERESTING 👍
Thank you very much!
Very Good Progress
Thanks!
Let’s just say if it fails.. and it falls apart in my garage before i finish. Then I will have failed and I will be wrong. Is it fair to say if when I’m done and inspected and determined to be safe for the road.. does that make you wrong or just difference of opinion?
Thats going to look so cool. Nice job.
Thanks 👍
Ditto. Looking good
Thanks!
Starting to look pretty good !!
Thanks!
Makes me think of the roofline of an MGB GT.
Looking good. The passenger side rear ofthe roof corner looks a little higher. Has more of a curve than drivers side.
Very impressed how you did the roof. :)
Could be camera lens distortion.
Thanks! I’m thinking of adding a tube across the roof at that point, because the roof sheet is still very flexible and I’m thinking if I roll the tube I can make the roof fit better and match both sides.
@@myclassicfords3658 It could be leaning to one side which makes it look more rounded than the other side. A bar should sort it. :)
Great progress guna be interesting to see how the final look is
Yup it will be interesting at the least! Thanks for watching!
Looking good it's starting to remind me a bit of the Datsun 240Z that I used to drive.Oh by the way congrats on the success of your channel. Awesome!
Thanks! And yes definitely has a little 240 inspiration
Hi , are you taking out the V12 for more room , so to make the front shorter ? Shame really as that motor was a VERYsolid with plenty of power on tap
The first think that came to mind looking at the back was a sixties baracuda.
🇳🇴 The roof is taking shape.
I like the the way you curved the roof in the back. Gonna look good.
Still afraid the roof is to tall,but i hope i am wrong. You are werry talented in what you do.
Thanks! I’m hoping after I get a little more done the roof will look about right, I was sort of looking at a jag XKE as well.
Looks awesome!
Thanks!
It reminds me of the Dodge Arrow which was similar to B210 Datsun. The bolt pattern on the Jaguar for the wheels are 4 3/4 like Chevy (just a note) Looking good man!!! It’s maybe possible to use the trunks outer layer of metal to help shape the the roof and beyond.
Yes true! Thanks for watching!
arrived here cause bad chad mentioned you, watched a few vids so far.
Me too
Thanks! Hope you like it!
@@myclassicfords3658 I'm in Halifax, where r u?
@@RussBillard Mount Uniacke!
Shared on Facebook. I hope you get a lot more viewers.
Hey! Thanks a lot!
You could always fit a xjs rear windscreen.
True, I’m currently liking the XKE fastback style
wonder if you can add the rearhatch and a piece of the roof from a station wagon / hatchback / shooting brake type car
Yeah I rear hatch from something may work out good! Thanks for watching!
I am almost thinking you should have made the roof drop down a couple of inches further forward, as in making the front straight piece of the bended bar shorter
Yes I’m hoping it will end up looking good, I’ve thought of that as well.
Thanks for watching!
make the cuts in the roof longer it help with the bumps
Thanks, I may try that especially closer to the top. And thanks for watching!
Like the roof line looks good. Reconsider cutting the back of the car off maybe going a little to far - Car length is good.
Thank you, I’m not 100 percent on the back either
@@myclassicfords3658 Here is a car with a roofline that is different. th-cam.com/video/nGKXgZbKWY4/w-d-xo.html&si=EnSIkaIECMiOmarE
How about some eye protection when you're welding?!
Are you building a Daytona?
Something similar, also got inspiration from the 240z and a couple other cars
@@myclassicfords3658the 240 has great lines... It's going to be really interesting to see what you do .
@@MrRajsta thanks!
👍myself i see a little bit ford inspired 66 mustang fast back/ 🤔need louvers
I was seeing a little 69 mustang quarter windows..
he uses soapstone!!!! my kind of man!! and a tape measure user!!!!
Yes sir, it really takes the guesswork out!
Is this still going?
I've been busy with a small business, but in a couple weeks im going to set some time a side for her!
use what you got and make it work is in Germany, where i live Impossible if you want it legal... 😑
Hopefully I have no trouble getting it legal, it would be fun to drive!
Ummm…ok…why didn’t you just buy an MGB GT and drop a V8 in it ?
I had this car lol and I always wanted to try my hand at a total custom build.
I want that car.Talk with me.
Ha! It’s a bit of a project at the moment!
Thanks for watching!
Roof is too tall. Completely out of proportion.
Maybe, I was comparing it with a XKE.
Hopefully when I’m done it will look ok