Sonoff TH Elite 20A Wifi Temp. meter for geyser control (Smart Load inverter / grid powered)
ฝัง
- เผยแพร่เมื่อ 10 มิ.ย. 2024
- Since I heat my 150l geyser via the Smart Load
output of my Deye inverter (excess solar),
I needed a beter way to manage the heat.
The geyser's own thermostat can be set to max (around 70°C)
Excess solar, after the battery is charged, will heat the geyser.
When it's cloudy, the grid must heat the geyser.
I wanted to take the guess work out.
It will only use grid power at certain times of the day
when the temperature is lower than required.
I now have the ability to customize time of day and temperature required.
Boer maak 'n plan! Clever my friend. Congratulations. We need innovators like you!
Great video, can this work for a solar geyser?
1. If the temp probe can be alstuck on where the heat of the water can be measured.
2. It then provides a relay for any power to be switched on/off via a combo of time & temp.
Thanks sir what putty glue was used?
@@ahmedomar7743Den Braven Glue Screws