He’s like a mad goblin tinkering in a cave. Everytime I fall for it and think he’s gonna think it through when testing stuff he just says he’s gonna hit it with progressively longer objects. This is awesome
@@thelastcube. Its not nearly as much of a joke as people think it is, the only difference between his staged lack of safety and the real lack of safety that exists here in Australia is he's wearing an apron and he's not drunk lol, other than that, pretty spot on really.
I swear the nails were like: 'Let's mess with him!' 'How?' 'Watch me flip around a bunch, then you flip the other way and do the same thing!' 'Right, here we go!'
I've paid attention to the health&safety instructions at work that one time in the last ten years so I'm a bit of an expert now and let me tell you, you pretty much nailed it.
Look at you! Working metal like a man of the night on that lathe. Your skills are growing. Once you collect all 5 infinity lathes, you can machine my metal any night.
ok but the fact that it unironically worked so well and also held up while doing its job exactly as intended while looking like a legitimate product tho.
Dancing on a spinning janky lathe with an apron implying you might not be wearing pants is the most hardcore safety last actions I've ever seen. It actually made me less nervous than watching Adam Savage doing anything around a lathe.
Oof, reminds me of when he assembled something on top of his lathes motor housing, dropped a small screw and immediately reached down to grab it under a spinning chuck that was like one foot in diameter.
You should have bought the strong blanks and blown a nail shaped hole straight through your upstairs floor and ceiling in the process, that would have been funny I think. Also, that warcrime of a construction tool looks very good and professional. But most of all, shiny.
What surprised me was that it happenend once, he acknowledged it, didn't do anything to try and prevent it, and it actually again, just pinting the other side.
Bro, the fact that this thing pierced through that thick iron plate is insane. If that hammer somehow got messed up and that nail hit him, I'm pretty sure it would just go through flesh AND bone
I know a guy that was nailing 2 pieces of metal on the ceiling with a ramset and since his shot wasn't perfectly perpendicular to the material the nail rebounded and went through his testicle
ROFL My wife and I are DYING over here, brother XD The second nail killed us both. lol Had to pause it at 9:40 to just die here. You're a wonderful machinist, man. Keep it up.
Just imagine your house is getting robbed. You grab your .22 cal hammer and smack one robber in the head. His skull crumples, and a nail flies out and pins the other guy to the wall. Thousands of miles away, a bald eagle sheds a single joyous tear.
@@sir_vix I am pretty sure that 'I Did A Thing' would legally be considered a member of Florida Legislature at this point if he entered the state. No need to run for office with a resume that hefty. (Though as a Apprentice EMT I may or may not have very strong feelings about people mucking around near live power tools/fire arms/industrial machinery/logging equipment/explosives/Medical Anything.)
"Nukes are so 20th century. I wanted to go for something bigger, something more bombastic, something truly spectacular. And now, I'm proud to announce announce that, as my patrons found out in our live stream last week, our planetary orbital lasers are nearing completion!"
I used a lathe a lot, when he climbed on it I damn near shit myself. Holy fuck, there are literal video of people turning into spaghetti after getting caught in one.
@@QCmaxthebeast Yeah, this was a real 'oh shit' moment do have to wonder how this all goes down behind the scenes, he gets on the lathe, turns it on for 30 sec then all done, or mount up while its active? questions, questions
Isn't that common knowledge throughout the world? I live in Denmark (quite far away from Mexico too) and the first thing I think of when someone says "Very dangerous boom-hammer used recreationally, preferably under the influence of hard liqueur" is obviously "Mexicans!" :P
Internally screaming while imagining standing barefoot on piles of razor sharp swarf. Man knows how to use a lathe, but dear god someone teach him how to use some fucking PPE lmao
That’s but a lightwork, my friend Everton Dias imagined and made a thesis on nuclear fusion, and was on his way to complete his magnum opus by making a practical nuclear fusion powerplant, however the incident of 2013 stopped him right on his tracks. If that day hadn’t happened, maybe he would’ve won his 50° nobel prize. He was such a genius
Hey man, as a machinist who learned lathe first and used 60+ year old machines, it makes me really happy to see others learning. Even it they make butt plugs for their first piece.
I love how even with great machines humor will get people to make buttplugs & dildos. I teach people 3d printing (FDM) & the amount of times people were like can we print buttplugs & dildos are far to often.
And then comes to the government and goes "if it has trigger, its a gun" like retards or corrupt peaces of shit they are, and so this will be the natural step to have working tool. Less safe and regulation only hurt people in many ways.
My man just got up and went "today I will break every safety rule" and jumped barefoot on heavy maschenery, making a gun hammer. My instructer in metal-works would be screaming if he saw that.
He's also single handed keeping bunnings and gameco financially viable during lockdown Speaking of single hands, that should probably be his next project
I love the fact that two of my favorite channels are this, and Stuff Made Here Stuff Made Here: Calculated with physics that the velocity of his baseball should be around 135, it was in the end 133 I did a thing: Watches in disbelief as he now suddenly has three horizontal nail silhouettes in his ceiling.
I did a thing is the reason Stuff Made Here need to put a disclaimer on playing around with blanks. So actually it should be recommended for health and safety you watch both
Ok. I just found you yesterday, and have watched maybe 4 or 5 of yours to completion. I do not, cannot, sit for long periods, nor complete whole tingys very often. One thing I felt, or deduced, or suspected... by myself, a fellow Adult with Deficits.... is that you may have been blessed with the creativity and attraction to novel, and then that book made its debut...
i love how his build quality is slowly getting better and better while he buys more tools for no reason other than the fact to make tools he has no true use for. love this guy and his work, keep it up!
So, based on the size blanks he used, a 9mm blank would be about 50% wider. Take the diameter and compare it and that's about 2.5 times more volume for gunpowder if the height of the blank stays the same.
@@nicewhenearnedrudemostlyel489 the rest of that statement is pretty important. Did you just not understand what it means to be badly injured? Because, those fingers hardly constitutes having been "badly" injured. not even close. No idea if its actually a fact, but idk how those fingers are suppose to contradict their statement at all.
Genius idea, mate. Distracting the youtube engineers by dancing on the running lathe, so they don't make fun of you for not centring it properly was a stroke of pure gold.
@@bestaround3323 one end is heavier than the other, it would spin end over end when shot straight up like it was & land in the ceiling horizontally. It would be fairly uncommon for it to go straight in like it was hammered in vertically.🤷🏻♀️
I was thinking "why the hell he shooting up" but have to say than shooting down is more dangerous for himself. But shooting down to water is maybe good way to go. Or sand. (If there really is "good ways" of it)
Go to nordvpn.com/ididathing to get a 2-year plan plus 4 additional months with a huge discount!
E
What’s 4 I can’t count that high
nord v peen
Good hammer 👍
copyright striked
Loved the Lathe section
Stop watching TH-cam and go back into your tunnel. We're waiting for results 😘
whoa thanks for the likes this is a new record (you guys are amazing)
quality aye
now steal this idea and use fireworks
The furze is here!
The fact that yaueore still alive is genuinely impressive
Trust me, his dead inside.
No one hear in this comment section has grammar apparently
Whatt do yoo meen?
Fun fact. The man is a trained professional and he is not dead *yet*
@Hakim Habib bruh I was making a joke, I literally misspelled here in my commet
I laughed a lot at the first nail shaped hole, but after seeing the second, perfectly parallel nail hole it was just too brilliant
THIRD ONE
wow youtube is broken lol
I lost it 😂
He’s like a mad goblin tinkering in a cave. Everytime I fall for it and think he’s gonna think it through when testing stuff he just says he’s gonna hit it with progressively longer objects. This is awesome
I compare him more to an engineer in a zombie apocalypse coming up with ideas of cooler and intimidating weapons
The goblin is finna get all of your gold 💀 (You ain't finna get Legendary)
1000th like from me!
Imagine 88 of these on a piano
The Gun-iano
Mattias, don't.
@@MateoTardio you know me I would never
Yes
the poor piano ono
I would be proud to be nailed by this hammer.
amen
It's my boy
You will son, you will
Ill meet you in Jerusalem in a couple of days
HOW ARE YOU VERIFIED LMAOO
As a Mexican, I'm honored we inspired you. 10/10
You going to buy a hammer from him?
the second nail shaped hole in the cieling being almost perfectly aligned with the first one is probably the single funniest thing ive ever seen
It is like a Tom shaped hole in Tom and Jerry
this guy is the perfect example how small the gap between a genious and a mad scientist really is
He's playing jump rope with that line
More madness, funny but don't want to learn from him.
do as he says, not as he does, i guess.
or between those two cheeks
mate i literally just drilled a hole in some metal
The fact that you're still alive is simply mind-boggling.
i have no other conclusion to justify this other than that he's autralian
The nail in the ceiling lmfao
Who said he's alive?
And how he hasn't accidentally killed anyone too
@@thelastcube. Its not nearly as much of a joke as people think it is, the only difference between his staged lack of safety and the real lack of safety that exists here in Australia is he's wearing an apron and he's not drunk lol, other than that, pretty spot on really.
This channel is pure concentrated goblin engineering and it’s both immensely concerning and absolutely hilarious.
imagine breaking into this guys house only to see him whip out this warcrime of a hammer
I love that the nails just leave a cartoon-like nail shaped hole in the ceiling.
I know right XD
It doesn't even seem real 😂 just an addition to this hilariously entertaining video
It's like an ACME gadget the coyote bought to try and nail the roadrunner's feet to the ground.
Me too
I swear the nails were like: 'Let's mess with him!' 'How?' 'Watch me flip around a bunch, then you flip the other way and do the same thing!' 'Right, here we go!'
i love how there's just a perfect outline of the nail in the ceiling like in cartoons when somebody plow's through a wall really fast
made my day
Those are real?
@@syedkhusroahmed9767 Yeah
and the fact that both of them hit the ceiling really close to each other lol
came down here looking for this comment😂🤜
When you have a powder-powered hammer, every problem starts to look like an enemy combatant
Or a frying pan... 🤣
“Tap and Die” is a great name for this entire build.
Yo... don't die bruh
ill try
Steezy Kane?
@@Ididathing can you buy me robux
@@havesomerubicon6097 ...
@@Ididathing I wouldn't exactly call this "trying"
Thor aint got shit on you bro
But can it kill tomatoes?
@@amosbackstrom5366 yeah. Probably even cucumbers. Or eggplants
@@Damian-cilr1 or your mom
Second time i've seen Integza Comment
Does Thor have a Gun hammer? No? Thought so.
I like how he’s like “look at this price, $1,000. I’m better off making my own”
*proceeds to spend $2,000 right after
Diy projects in a nutshell
But in this case a lathe is an investment because who knows how many more videos it will come in handy for. It will pay for itself in six months.
thatsthejoke.jpg
I've paid attention to the health&safety instructions at work that one time in the last ten years so I'm a bit of an expert now and let me tell you, you pretty much nailed it.
Him dancing on top of the lathe is actually one of the most terrifying things I have ever seen in my entire life
Just seeing that hammer scared the shit out of me.
With the apron lmalo
i'm not a "safety first" kind of guy by any means, but that one triggered me. lmao
And to think, I was concerned when he was barefoot...
You forgot to mention him putting swarf in his pants
This guy: “I should invest in kevlar to protect myself”
Also this guy: *dances barefoot on the lathe*
Didn't you know? His callouses are made of kevlar.
@@General12th I'm pretty sure kevlar is made from his callouses
He probably wiped it before getting on, I also don't see how his crocs would help.
Sidenote: he probably stops it while getting on and off.
@@StevDoesBigJumps I sincerely doubt he does.
he obviously hasn’t seen the Russian lathe video
I cant believe this dude is chill enough to dance on top of a spinning lathe
16:31 love the attention to detail on something that appears for less than a second
Wow, I didn't even notice that! Good catch lol!
Look at you! Working metal like a man of the night on that lathe. Your skills are growing. Once you collect all 5 infinity lathes, you can machine my metal any night.
Plz notice me hand tool rescue
sus
ma- machine your thick hard metal rod? 😳
@@snoostimobo3564 Noticed.
Oh wow i rlly like restoration channels and i've never seen yours, cool!
The outline of the nail on the ceiling is the funniest shit I've seen all day
I like how he tests to see it it will puncture the bbq plate and when it dose he proceeded to use it as a form of cover
@@micahloscomb2522 that plate is angled when he hit it, only it didn't fully puncture it, the angle he has it at would just deflect the nail.
i found the second one to be about just as funny, cause its like the lesson was not learned
Let's go Check Upstairs.............again ! 3X priceless !
The second one was way funnier 😄
man turned MJOLNIR into a GRENADE ON A STICK that doesnt BLOW HIS FINGERS OFF and is STILL ALIVE. +10 respect!
ok but the fact that it unironically worked so well and also held up while doing its job exactly as intended while looking like a legitimate product tho.
Dancing on a spinning janky lathe with an apron implying you might not be wearing pants is the most hardcore safety last actions I've ever seen. It actually made me less nervous than watching Adam Savage doing anything around a lathe.
If you're already standing on the lathe, some loose pants that could catch on the jaws sounds even less safe.
Oof, reminds me of when he assembled something on top of his lathes motor housing, dropped a small screw and immediately reached down to grab it under a spinning chuck that was like one foot in diameter.
This probably killed 90% of the safety trolls on youtube, making it much more enjoyable for everyone else
Reminded me of all those funny videos of whacky Chinese workers getting caught on lathes.
@@plaguemouse5549 reminds me of those whacky Chinese workers getting caught in heavy machinery on r/NSFL and r/DarwinAward.
Dancing on the top of a running lathe whilst wearing an apron is easily the most wildly irresponsible thing I've ever seen.
Bravo
Ah yes but he’s Australian. he falls in, the lathe breaks and he walks away unharmed. They’re like Florida man times a hundred.
That says alot, given he made a hammer that launches nails at transonic speeds through just about any material, including concrete.
This is why we don't ever allow this guy to be bored. That - and gunhammers - happen.
He is noc russian, he will be fine xD
@@Occult_Orchid he wasn't wearing his ground harness, if he'd fallen he'd have gone up into the ceiling away from the lathe
You should have bought the strong blanks and blown a nail shaped hole straight through your upstairs floor and ceiling in the process, that would have been funny I think.
Also, that warcrime of a construction tool looks very good and professional. But most of all, shiny.
after soooooo many years of watching him, this is still one of my favorites
The fact it fired the nails through the ceiling SIDEWAYS is hilarious.
What surprised me was that it happenend once, he acknowledged it, didn't do anything to try and prevent it, and it actually again, just pinting the other side.
Not just once, twice but thrice!
@@AnakinSkyobiliviator nooooo i only watched until the second one and came to the comments cuz i was dying and now theres a spoiler
@@mitchellfederico7771 you're dying? Need me to call an ambulance?
@@iamalolz he's already a goner.
I love how the nail didn’t even pierce through the roof normally, it just went through it sideways 💀
-TWICE!!!-
THREE TIMES!?!!!
@@BirdmanJo_ Thrice.
Yea lmao like a cartoon
E
Arousing
Bro, the fact that this thing pierced through that thick iron plate is insane. If that hammer somehow got messed up and that nail hit him, I'm pretty sure it would just go through flesh AND bone
I know a guy that was nailing 2 pieces of metal on the ceiling with a ramset and since his shot wasn't perfectly perpendicular to the material the nail rebounded and went through his testicle
@@jimmy13morrison please never describe such a thing to me ever again
ROFL
My wife and I are DYING over here, brother XD
The second nail killed us both.
lol
Had to pause it at 9:40 to just die here.
You're a wonderful machinist, man.
Keep it up.
Step one in protection: prove the nail does actually go through the bbq plate. Step two: use the bbq plate to hide behind.
And he put it in a perfect slope to guide any debris to his face.
Perfect Civilize bullet-resistant shield.
It looks to be made out of cast iron, which would make sense since cast iron is actually quite brittle and easy to pierce with high velocity.
“And now without ear protection”
This quote describes the entire channel so well
Ok
Ok
Ok
Ok
Ok
hey can you nail this plank down?
"Yeah lemme just load my hammer"
If someone breaks into this guy's house, he has the most deadly arsenal to retaliate.
Him slowly panning up to the nail shaped hole in his ceiling is the funniest thing I’ve seen in a while.
That was like a looney toons gag
E
The second one straight up sent me
It ran into it while chasing roadrunner
it was like a Looney tunes character running through a wall and making a hole
I have never been so worried about a TH-camr's well being before.
HE WAS DANCING BAREFOOT ON A RUNNING LATHE
My soul left my body, I swear
Same, I'm scared just looking at the thumbnail
Australia's wildlife is much scarier than all of this machinery. Running a lathe probably feels as mundane to him as we feel making a sandwich.
@@JohnDoe-ou8oh well the video is from like 2 months ago...
@@JohnDoe-ou8oh the unnamed event that involved a couple of planes?
Just imagine your house is getting robbed. You grab your .22 cal hammer and smack one robber in the head. His skull crumples, and a nail flies out and pins the other guy to the wall. Thousands of miles away, a bald eagle sheds a single joyous tear.
This main straight up made a literal nail gun
This man does literally everything my 7 year old self would do with all this kind of equipment regardless of safety
It's one of the burdens of being an adult
Australia be like:
😂😂
One word, youtube money. Wait thats 2.
Yes
I'm no expert on Australian law but I feel like this guy gets closer and closer to breaking it every video
Well considering the laws in Australia change every time the news flips on I'd say nobody is an expert! Build away at these megahammers!
Nah, Florida man approves!
He'll have to run for office soon.
@@sir_vix I am pretty sure that 'I Did A Thing' would legally be considered a member of Florida Legislature at this point if he entered the state. No need to run for office with a resume that hefty. (Though as a Apprentice EMT I may or may not have very strong feelings about people mucking around near live power tools/fire arms/industrial machinery/logging equipment/explosives/Medical Anything.)
If you Aussie's keep submitting your freedoms & sovereignty upon command, your choosing to be cabal slaves...
If a Zombie Apocalypse ever breaks out, this man is well prepared
You couldn't write a funnier shot than panning up to the ceiling to find a second perfect outline of a nail.
You can. Its a third perfect outline of a nail
His builds are getting more advanced, its only a matter of time until he accidentally makes a nuke
delete this.
@@RIFLQ why
"Nukes are so 20th century. I wanted to go for something bigger, something more bombastic, something truly spectacular. And now, I'm proud to announce announce that, as my patrons found out in our live stream last week, our planetary orbital lasers are nearing completion!"
looking at the story of the nuclear boyscout, this may actually be doable lol
A 50 cal nuke
I love his wife coming in like “what was that” as if he hasn’t been making a gun hammer for the past few days
Think that’s his mom or sister
@@John-Doe-Yo Same thing pretty much.
@@OfficialCharles word
@@OfficialCharles **Sweet Home Alabama plays loudly**
That was momsy, remembering when he was 5 years old, holding a turd, in his hand, outside the back door, saying...."I did a thing".
New York part in the sponsor wasn’t what I expected.
I can only imagine how much tiny metal pieces you have in your feet! Great Videos you are doing!
This man’s purposeful disregard for health and safety is infinitely stressful and equally entertaining
I used a lathe a lot, when he climbed on it I damn near shit myself. Holy fuck, there are literal video of people turning into spaghetti after getting caught in one.
@@QCmaxthebeast Yeah, this was a real 'oh shit' moment
do have to wonder how this all goes down behind the scenes, he gets on the lathe, turns it on for 30 sec then all done, or mount up while its active?
questions, questions
genuinely scares me
Agreed- I was totally fine with everything up to that point... But one foot on the head and one on the tailstock? Pants have been ruined.
@@QCmaxthebeast I curled up into a ball watching him dance around like that, lathes are probably the scariest workshop machines 😬
“Then I saw the experts, Mexicans.”
I feel honored by this.
Isn't that common knowledge throughout the world? I live in Denmark (quite far away from Mexico too) and the first thing I think of when someone says "Very dangerous boom-hammer used recreationally, preferably under the influence of hard liqueur" is obviously "Mexicans!" :P
@@andersjjensen yeah but hearing an Australian say it is pretty nice.
@@andersjjensen normal here in the U.S.A
@@potatoman5595 wishing you were as cool as other countries?
@@Voidi-Void yeah
Just to Point out: The rounds he's using are not .50 cals instead they are .50 AE more or less a .50 cal for pistols (specifically the Desert Eagle)
Thought I was the only one watching this old video if you see this I hope you have a amazing life and if not I hope you do soon
This is my favorite radical, surrealist, DIY channel based out of all of the South Waleses new and old.
"Hey man can you hit in these nails for me?"
"Yeah sure let me take the safety off my hammer real quick"
"THE WHAT"
Damm , underrated comment bro
I imagine it's just some foam between the 2 pieces
Hah, as if he would ever entertain the idea of adding a safety to one of his creations.
Honestly the scariest part of this wasn't the hammer, it was him dancing on top of a lathe while barefoot.
I mean the scariest part is when he’s putting the rocks In the washing machine half naked 14:45
Internally screaming while imagining standing barefoot on piles of razor sharp swarf. Man knows how to use a lathe, but dear god someone teach him how to use some fucking PPE lmao
Na, when he put it down his pants
@@joeruth123 RIGHT UP HIS FACE
@@dmilius5598 haha but crack
NAAH WE GOT DECIMATOR IN REAL LIFE BEFORE GTA 6 😭😭
That’s but a lightwork, my friend Everton Dias imagined and made a thesis on nuclear fusion, and was on his way to complete his magnum opus by making a practical nuclear fusion powerplant, however the incident of 2013 stopped him right on his tracks. If that day hadn’t happened, maybe he would’ve won his 50° nobel prize. He was such a genius
Hey man, as a machinist who learned lathe first and used 60+ year old machines, it makes me really happy to see others learning. Even it they make butt plugs for their first piece.
I love how even with great machines humor will get people to make buttplugs & dildos. I teach people 3d printing (FDM) & the amount of times people were like can we print buttplugs & dildos are far to often.
Oh my God I didn't get it until now
I thought that was everyones first piece?
As a machinist have you ever danced on top of your lathe while the chuck is spinning?
@@Ididathing lol
My first piece was a Moby huge.
Your ambivalence towards the danger of heavy machinery is simultaneously inspiring and terrifying
at least he doesn't wear gloves around rotary equipment
BRO MADE THE DECIMATOR
FROM DECAYING WINTER
FR
Believe it or not those Mexicans are not using special hammers…that’s just Mexican strength
His total disregard for his own safety kept me in chcokehold between morbid curiosity and empathic anxiety the whole video 😂
Morbius
This is the perfect comment
It's morbin time!
chcoke
right
This man's complete and flagrant disregard for health and safety, yet continued survival gives me hope for humanity
Us jackasses have a funny way of cheating death.
The power of being Australian
You obviously haven't seen Styropyro's videos, then. He takes 'dangerous' to a whole new level.
@@eliotcamel7799 does this makes it better ?
i got this to 690 nice
Ididathing is like a caveman, he finds stuff, and then hits it with a giant stick for no reason
This is a comedy show and a thriller at the same time.
Nice to see him still wearing plexiglas visor for testing after nail went three times through drywall AND floor mat. Sideways.
Safety first.
It also went through the 2x4 he was using lol
And yet he still doesn’t wear shoes.
@@lostlakepictures7378 at that point, shoes would only slowdown the first aid
@@lostlakepictures7378 straya
Thought all the crazy engineers agreed that safety was third.
I- Is that a gun?
“No, it’s a hammer.”
But, it looks and functions like a-
“No… it’s a hammer.”
And then comes to the government and goes "if it has trigger, its a gun" like retards or corrupt peaces of shit they are, and so this will be the natural step to have working tool. Less safe and regulation only hurt people in many ways.
@@Hellsong89 don’t bring politics here
@@Hellsong89 for real lol they be like "omg this stock is too scary and clearly gives you like 10000 more rpm when you have it so lets ban"
Australian government: arrest him anyway
@@coralxanpu .........y...y.....y...y....y....gyy... y.....yu...
Y..y.y.... uth yuy U y. Uh UTI U. Yu...
The second nail in the roof got me lmao 🤣
It took me 2 years to understand what you had made on that lathe, but now it is infinitely funnier. Thanks to my friends for showing me lmao
My man just got up and went "today I will break every safety rule" and jumped barefoot on heavy maschenery, making a gun hammer.
My instructer in metal-works would be screaming if he saw that.
Send it to him
Don't say the g-word, man!
its not a "g word" you should update this man.. its a construction tool.
I'm wondering if it's a composite shot
This is definitely the highest quality build you've ever made. So damn cool.
Agreed lol
He's also single handed keeping bunnings and gameco financially viable during lockdown
Speaking of single hands, that should probably be his next project
It’s the best one he’s ever made yet he threw it in the trash at the end lmfao
As any engineer would explain- the entire invention and customer ready model is roughly perfect
My man over here sacrificing eggs for the bit like they didn't cost as much as his lathe.
the fucking nails in the roof is comical its like the perfect outline when cartoon characters run through walls
I thought the same (!!)
The first nail was hilarious, but looking up and seeing the second hole made me cry laughing
I love the fact that two of my favorite channels are this, and Stuff Made Here
Stuff Made Here: Calculated with physics that the velocity of his baseball should be around 135, it was in the end 133
I did a thing: Watches in disbelief as he now suddenly has three horizontal nail silhouettes in his ceiling.
god damn cartoon outlines
Two sides of the same coin
I did a thing is the reason Stuff Made Here need to put a disclaimer on playing around with blanks. So actually it should be recommended for health and safety you watch both
@@sydney_pepper these friggin cartoon outlines are taking over
Stuff made here is just the OSHA approved I did a thing
the decimator from decaying winter irl:
Ok. I just found you yesterday, and have watched maybe 4 or 5 of yours to completion. I do not, cannot, sit for long periods, nor complete whole tingys very often. One thing I felt, or deduced, or suspected... by myself, a fellow Adult with Deficits.... is that you may have been blessed with the creativity and attraction to novel, and then that book made its debut...
i love how his build quality is slowly getting better and better while he buys more tools for no reason other than the fact to make tools he has no true use for. love this guy and his work, keep it up!
*accidentally fires a nail through his ceiling*
"holy shit that's dangerous. let me do it again"
twice
3 times
again...twice = 3 times
x2 lol
actually 4 times
There is something so funny about a nail shaped hole, I don't know what, but I died laughing
I’ve never smiled so much . If I get cancer I’m asking make a wish to hangout with you for the day . Love you brother ! 😂😅❤
The scariest part about this channel is that, the better he gets at machining and metal work, the more dangerous the things he makes will get
He probably start making nuclear bombs soon😂😂😁😁
Everyone eventually builds weapons. It's our primal nature. We cant build food or mates so the next obvious choice is weapons.
Legend has it that for every extra significant figure he adds to the tolerances, the project is 10x more likely to kill you...
My wife wont let me buy a mill because she saw my sketch book and my rough draft for a ferrolock revolving shotgun....
@@benadams5557 I mean it’s a good shotgun idea I don’t see the problem!
imagine breaking into someone's house and seeing a man with a welding mask, apron and 9mm hammer down the hall
Isn't it 50 cal
@@adamfriebele8171 I believe so
So, based on the size blanks he used, a 9mm blank would be about 50% wider. Take the diameter and compare it and that's about 2.5 times more volume for gunpowder if the height of the blank stays the same.
@@Tah-. the caliber of the blank is 6.8mm or roughly .26 inches.
@@rob98000 most nail guns use .22 or .25 blanks
This man is a person of extreme focus and extreme dance moves
That was really cool man!
Imagine being a burglar in his house, then suddenly hear him say: Honey, get me the .50 cal hammer.
And thats why you don’t mess with a dumbass engineer
it will be veryy funny🤣
heres something
h
@@arcticfox2271 actually any engineer.
*looks at my metal spear in the corner, constructed as a joke
@@mechadrake or blacksmiths
this is unironically the best looking thing he's ever made
When he said “Make his thing but worse” he was wrong. It’s just as cool.
I love the editing of these 😂
18:37 he just created a spiked pan
The fact this man hasn’t badly injured himself or injury himself at all is impressive the way he be messing with these machines
I'm surprised he hasn't been killed yet by it
He sliced his leg open in the bladed Skip It video
what about injury to the nearby child >.>
did you see his fingernails/tips?
"the fact that"
Ok facebook headline
@@nicewhenearnedrudemostlyel489 the rest of that statement is pretty important. Did you just not understand what it means to be badly injured?
Because, those fingers hardly constitutes having been "badly" injured.
not even close.
No idea if its actually a fact, but idk how those fingers are suppose to contradict their statement at all.
This guy's commitment to safety is really admirable.
I came here to learn precision machining...and now I only have 1 testicle.
@@njones420 HAHAHAHA
That one bit at 5:09 where he's dancing barefoot on the lathe and dicking around with the tailstock while it's running is the stuff of nightmares.
@@Skwerll yeah I was afraid he was going to slip and have a similar case of Gold member just without the gold
Dude you got me rollin man 😂🤣....
That was a terrifying result..... LETS DO IT AGAIN 🤣🤣🤣🤣🤣.
Keep doin ya things brother !
this guy would make an amazing stuntman
Genius idea, mate. Distracting the youtube engineers by dancing on the running lathe, so they don't make fun of you for not centring it properly was a stroke of pure gold.
No, he just gave all of them heart attacks instead.
@@kaiharris120 Less chance for mocking, I stand by what I wrote.
@@DEATHBYFIRE09 you should, I entirely agree with you. And if all the engineers are dead they can't mock you.
Another JAW 😂
It didnt distract you. I need to dance harder next time
I almost died laughing at the SIDEWAYS NAIL SHAPED HOLE in the ceiling. Then the second hole next to it killed me lol
LOL followed by the 3rd hole 🤣
Why is it sideways
@@bestaround3323 one end is heavier than the other, it would spin end over end when shot straight up like it was & land in the ceiling horizontally. It would be fairly uncommon for it to go straight in like it was hammered in vertically.🤷🏻♀️
*Goes to a flat job, temple of the gods man..just go along with it
I was thinking "why the hell he shooting up" but have to say than shooting down is more dangerous for himself. But shooting down to water is maybe good way to go. Or sand. (If there really is "good ways" of it)
not only is this the coolest thing uve ever made, its also one of the coolest things ever made on yt