Thanks for this. I'm on the same journey with the same vehicle so curious to know if you install a Chinese diesel heater and it's location. Great video!
Hi Ian, i just bought the same roof rail for my Peugeot Partner. The user manuel isn t very clear. Can you help me please? Which sponge tape did you use? The round or the square one or both of them? Also, the manuel says, apply in 3min before silicone dry, i don t understand apply what? The liquid rubber or the screw? 😊 Thank you for your help. Have a good day. Romain
@@ianwheeler7903 spring has sprung the grass has ris tell me where the girls is. Plenty rain lately. But BUT 45 degrees on the way . Cross fingers I make it,its hard to breath anytime.
I've just removed 2 of the black plastic rubber bungs on the roof and the holes seem a bit rusty, am I right in thinking a thread chaser will clean out the holes...any suggestions recommended...many thanks
Hi Ian, Thanks for this vid. One thing puzzles me. The black plastic screws the need to be removed before installation do not ‘screw’. On my Partner they just bend and break. You skip this part in your vid so I am curious how to remove them without breaking them. Thanks! Antoin
@@ianwheeler7903 I fitted them today, the screws were quite tough to screw in and I had trouble sitting the rails flush. Managed to get it close in the end. Thanks for the recommendation!
Nah won't subscribe. Video is poor as a tutorial. People have asked for help and all you've said is 'was a while ago and can't remember. No longer have the van'. Not a very good tutorial 🙄
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.15 (3/4)](http://i.ytimg.com/vi/IVwR87OH0_A/mqdefault.jpg)
you could use a ring spanner over the Alan key to give more purchase and leverage
Thanks for this. I'm on the same journey with the same vehicle so curious to know if you install a Chinese diesel heater and it's location. Great video!
Hi Ian, i just bought the same roof rail for my Peugeot Partner. The user manuel isn t very clear. Can you help me please? Which sponge tape did you use? The round or the square one or both of them? Also, the manuel says, apply in 3min before silicone dry, i don t understand apply what? The liquid rubber or the screw? 😊 Thank you for your help. Have a good day. Romain
Good old gaffer tape 😀👍
G-Day mate.👍
@@ianwheeler7903 spring has sprung the grass has ris tell me where the girls is. Plenty rain lately. But BUT 45 degrees on the way . Cross fingers I make it,its hard to breath anytime.
I've just removed 2 of the black plastic rubber bungs on the roof and the holes seem a bit rusty, am I right in thinking a thread chaser will clean out the holes...any suggestions recommended...many thanks
@@ianwheeler7903 Hi Ian, thanks very much for the reply much appreciated.
Hi Ian,
Thanks for this vid.
One thing puzzles me. The black plastic screws the need to be removed before installation do not ‘screw’. On my Partner they just bend and break.
You skip this part in your vid so I am curious how to remove them without breaking them.
Thanks!
Antoin
I'm also struggling to get the plugs out too. How did you do it in the end?
As always mate..👍👍
Where did you buy these from and how are they holding up?
@@ianwheeler7903 thanks Ian, would it be possible if you could provide the link for them. I've been looking everywhere and can't find them
@@ianwheeler7903 Thank you, I bought them. First time in a while since I bought from ebay. They actually look okay, hopefully they will fit!
@@ianwheeler7903 I fitted them today, the screws were quite tough to screw in and I had trouble sitting the rails flush. Managed to get it close in the end. Thanks for the recommendation!
Szia. tudnál linket küldeni, hol vetted. Köszi!@@George-ko8cd
Nah won't subscribe. Video is poor as a tutorial. People have asked for help and all you've said is 'was a while ago and can't remember. No longer have the van'. Not a very good tutorial 🙄