Due to this video, I purchased this set up. I have an '08 Road King Classic. My headlight burnt out and I wanted to upgrade. That same day you put out this video. I went ahead and ordered them and got them in two days. Mine were plug and play. Man the difference these make compaired to the original lighting. Thank you for the videos. Keep it up man
Those butt connectors actually have a shrink wrap type insulation on them. Heat 'em up and they'll seal your connections right up 👍 I love the ones I have. Plenty bright!
I did the hogzworkz leds for my 98 roadking has the same setup as those and made a tremendous difference. Tip is to aim ur passing lights a little bit to the left and right and it really helps light up the ditch and tree lines for any animals that may run out in front of u👍. I paid 220.00 for my kit fyi...
Got the sunpie daymaker (same as harleys daymaker) on all my hd's. Such a difference i can see so well during my 5am commute. Once you put those daymakers in you wont wanna go back to halogen. ( yours have same patern as the daymaker)
I have tried the led headlight what I don't like is the highbeams. I have yet to try one that throws a beam higher and farther down the road like the old bulb style. The ones I tried had a hell of a lot better low beam but switching to high beam was just like blinking your eyes and nothing really changing in the beam pattern. If this does please include it in your review thanks.
Good move ! Those of us who haven't done light upgrades sure have been thinking about it . Lights and Brakes are number one most important for a safer ride . Stay safe .
I Love mine. The group I ride with make me lead at night. I even light up the signs during the day on a sunny day. Nice video I did change the wiring with a kit so my passing lamps stay on with the high beam allows me to turn them on and off at the switch on the dash.
Im sure they are soooo much brighter and safer. I have been contemplating putting some in my old heritage. I just can't get used to the non-classic look yet.. if they made some that looked like the old tri bar headlight I'd be all over it
Did both my Ultras as soon as I got them. Also did the LED turn signals front and rear and put the module in that tried Turned my rear turn signals into running lights/ turn signals
I bought a little jumper wire from HD that lets the two side lights be on when the high beam is on, as well as the low beam. You can still still turn the driving lights off if you want, but why would ya want to?
After I did a daymaker headlight on my sporty I will never go back. The way they light up a perfect bowl shape across the road. I bought a amazon one for the sporty because I wanted to keep the HD one for my Dyna and it still about as bright as the HD one.
when you do your update in a few weeks, can you show the difference between low and high beams please, just curious what the high beam pattern is like.
I converted my 73 XLCH to all LED and I had to replace the flasher unit with one that had a resister built in and it is adjustable to increase or decrease resistance for the signals. I converted my FLSTF to all LED including the signals and I put in a special resister from J&P cycles. I converted to LED to save electricity especially on the Ironhead.
I put RRI led lights in my Nightrain and man. the low beam lights up all 3 lanes of the highway . but if you do the turn signals on the older bikes you need to get a load equalizer so they don't hyper flash.
Looks like the new lights work real good. I had a guy stop me and ask about the lights on my Harley. I never gave the lights much thought until that guy.
I have a single headlamp on my 2006 Fat Boy. I bought a led replacement light that is just a 3-sided little stick light and it also works great. Led is awesome! The first one I bought was for my Sportster and the 2nd one was basically the same light. Cheap too.
I changed to these on my 04 Road King after getting them for Christmas present. Mine are the chrome version and all 3 had comparable plugs. Funny thing I haven’t even ridden at night to try them but I know they’ll be a great upgrade!
I made this upgrade to my '09 electra glide classic a few months ago, well worth it. You'll also notice the LED's are much easier on the charging system than the halogen lamps...
That is a BIG DIFFERENCE! Man it is nice when you can see where you are going. Great job your camera woman did tell her to bill you for her work. All the best and Ride Safe
I installed the Ciro-3D Vision-X on my 2020 SGS, alls I could say is WoW, it also makes ya stand out during daylight hrs. Did all the turn signals also, (LED)
I just bought some off ebay for 58$ they weren't what I'd call plug and play but very bright.they were just labeled 80watt LEDs I ride alot at night and its pardon the pun day and night.
I did the same upgrade to my Heritage Classic and it doubled the light. Were up in the mountains and summer night rides are dangerous up here with Deer wondering along the roadway and jumping out. You probably have the same thig there. It's a safety issue...Good video
Excellent install vid ! May be worth mentioning, as STS stated, higher wattage LED create more heat. Change OEM plug to ceramic for added heat protection to wiring. RIDE EZ DAN YOUNG
no relay needed??? so no wire burn out from exsess heat drawn..? looks great still waiting for my bike to get home & maybe put a 2nd hand motor in it... cheers..
I would really like to see what it looks like in a corner. My ultra limited came with the DayMaker and I hate it because it has a hard cut off line and when leaned over in a corner it gets dark in the direction you are going.
nice I definately need an upgrade too, stock head light on 2021 flht dont light up the road for shit i was impressed with big difference these made for you
Got them on my 93 90th Edition Classic luv them great for country riding . Luv the Tramp from Barry Nantais windsor Ontario Canada great job . Keep making videos we luv ya.
I ride a white 06 road king police with lots of chrome and I like the way those black led lights look, I just can't make up my mind as to order a black or chrome light set. 🤔
My 03 cvo road king came with led lights similar to those....thingsbare brighter than lights on my silverado....definitely a worthy upgrade for someone with stock lights
The red covering on the butt connectors is a heat shrink material that will shrink when you heat it and give you a nice strong seal that is some what water proof
I think you did a good job. For me personally, I always walk up to the Harley counter at the dealer. And have them instal it. That way it's the best light. And they touched it last. But to each their own. Having proper lighting is key.
Just ordered a t-shirt, but as for the lights I've been on the fence myself about them. Though I need to do something as I find myself adding more and more lights to the bike just to remove them a few days later. Can't wait to see what you say in about 6 weeks.
Relooking your vids, Cory the Best crimping pliers I've found & used is made by Thomas & Betts, without a doubt, check out your hardware dealer,ask to look at their catalog. Pliers #8 " long, cutter on tip, red connector crimp , then yellow/ larger connector. Not all the lifts that were bought had lights,that fell to our shop.love to you both.
Hey Dude , God bless ya for the effort but ... Within the cutters you used is a feature on the inward handle side , ie. the half round looking portion of the tool is a crimper to crimp those fasteners with . then use a lighter and meltish the plastic without burning it . it should shrink if its the good stuff . If you start having problems it will be because those plier joints , they work in a pinch but a better connection is needed for the long haul . Peace Brother . Your a blessing
click the more icon (which is nothing more than the word more) at the end of the standard description up above " an email from a representative from a coma" more. when it opens all the info will be their.
As Blackhorse said.i bought the jumper harness so I can run passing lamps with high Beam on. Huge difference from the stock lights. Even daytime people can see you coming. Enjoy. Great video
The other thing you could’ve done other than cut those passing light connectors off and splice them together was just attach spade connectors to the new passing lights adapter wires and then simply plug them together with the factory plugs for the passing lights. Although you’ll probably never do it, you can return everything to factory original
Hefty heat synchs on the back of those lamps...You notice any excessive heat around headlamp faring edges or back housing of spot lamps? > Have to check out minimum charging system output requirements ..My newest Harley = '87 FLHTC....Probably find an upgrade to charging system output on older models IF needed.
That was a great improvement over the front of the bike, cleaned it up with the dark background of lights, XPCTD really did there home work on plug-n-play for the do it yourself project, Think😂 Bob Vella sponsor a garage build🤷.
I really enjoy your stuff, and yes, what a HUGE difference in your visual, in order to be as safe as possible we all need great lights, front and back. Stay safe my brother & keep 2 on the ground!
I have been using the Sunpie brand lights for years on all my many bikes. They are all made in China but i'm comfortable with Sunpie since i've never had a failure. Price is cheap, construction is very good, no failures, turns night to day, what's not to love?
Wow, unbelievable! I had a similar experience with my new bike. Was used to shitty halogen for 20 years (it was not great from the getgo). Last year, I upgraded to a new bike and thus LEDs...well, yes, quite the difference.
LOVE the light, Tramp!! I had wanted to put an LED headlamp on my bike awhile back but the shop told me it would pull too much juice and run my Streetglide down. Let me know if you have any trouble with that, please. And yes!! She's a beauty!! Just pack her up and I'll send you the shipping fee!!! LOL (Now you prob won't let me come and visit ya, tho!!)
I got them for my bike with the halo so run lights have orange and brights are a white my run lights I had to point downwards and I have to get a new pass through light can wount fit a 4 inch can so I had to tape them in lol
Like those lights, ordering a set for my 06 Deluxe and if I really like them I’ll get a set for my 01 Electra, at 60 I enjoy your channel and keeping it real, good job keep it up.
have you had a issue with leds interfering with a key fob or radio ? i have a 2010 electra glide and when the passing lamps are on it will screw with the security system and radio goes static
Those really light up the road, seen they sent Robin The Lady Biker one for her RK and was equally as bright. I think those make you more visible in day light too, I passed bike other day with LEDs and it was really bright definitely could see it a lot better than the old halogen light. Have fun and be safe.
so happy for you bro, that frosty light you had was worrying me some. LED lighting is the way to go for sure. on the cheapo versions the usual suspects are fitment issues and sealing issues. usually more in humid places, so if you skate past the humid issues you should be golden. Another benefit of running LED lighting is a greatly reduced electrical draw on your charging system. I usually replace all the regular lighting on my bikes to have all led's. Really happy you got the lights changed and the cost was unbeatable :-)
Installed some on my 01Roadking a few months ago, had the same reaction as you when I turned them on that night, could not be more happier.
Rigjt on, man.
Due to this video, I purchased this set up. I have an '08 Road King Classic. My headlight burnt out and I wanted to upgrade. That same day you put out this video. I went ahead and ordered them and got them in two days. Mine were plug and play. Man the difference these make compaired to the original lighting. Thank you for the videos. Keep it up man
Glad this helped, man!
Those butt connectors actually have a shrink wrap type insulation on them. Heat 'em up and they'll seal your connections right up 👍
I love the ones I have. Plenty bright!
Thanks, man. I'll do that.
I did the hogzworkz leds for my 98 roadking has the same setup as those and made a tremendous difference. Tip is to aim ur passing lights a little bit to the left and right and it really helps light up the ditch and tree lines for any animals that may run out in front of u👍. I paid 220.00 for my kit fyi...
My 14 has the same set up and it is truly night and day from the old style. Makes night riding so much better on those dark country roads.
Sure does!
Since these are LEDs do you need to install a resistor so your battery dont die? Or just plug and play?
Got the sunpie daymaker (same as harleys daymaker) on all my hd's. Such a difference i can see so well during my 5am commute. Once you put those daymakers in you wont wanna go back to halogen. ( yours have same patern as the daymaker)
I have tried the led headlight what I don't like is the highbeams. I have yet to try one that throws a beam higher and farther down the road like the old bulb style. The ones I tried had a hell of a lot better low beam but switching to high beam was just like blinking your eyes and nothing really changing in the beam pattern. If this does please include it in your review thanks.
That's a good looking light set, looks awesome on the bike!
Sure does, man. Looks like a UFO at night.
Nice job
First time watching Your channel my son met You this past wknd! Have a day! God Bless You and the family!
Enjoyed meeting Michael. Thanks so much, sir.
Good move ! Those of us who haven't done light upgrades sure have been thinking about it .
Lights and Brakes are number one most important for a safer ride . Stay safe .
I Love mine. The group I ride with make me lead at night. I even light up the signs during the day on a sunny day. Nice video I did change the wiring with a kit so my passing lamps stay on with the high beam allows me to turn them on and off at the switch on the dash.
If it weren't for the guy riding behind me into Tampa with the daymaker headlight, I wouldn't have been able to see much. That's what got me thinking.
Im sure they are soooo much brighter and safer. I have been contemplating putting some in my old heritage. I just can't get used to the non-classic look yet.. if they made some that looked like the old tri bar headlight I'd be all over it
Look at JW speaker, they have a classic looking model.
Now they just need to send you new indicators to match. Nice upgrade 👌🏻
Missmissppi
What?
Did both my Ultras as soon as I got them. Also did the LED turn signals front and rear and put the module in that tried
Turned my rear turn signals into running lights/ turn signals
I bought a little jumper wire from HD that lets the two side lights be on when the high beam is on, as well as the low beam. You can still still turn the driving lights off if you want, but why would ya want to?
After I did a daymaker headlight on my sporty I will never go back. The way they light up a perfect bowl shape across the road. I bought a amazon one for the sporty because I wanted to keep the HD one for my Dyna and it still about as bright as the HD one.
I don't blame for not going back.
when you do your update in a few weeks, can you show the difference between low and high beams please, just curious what the high beam pattern is like.
That’s an upgrade for sure! Congratulations
Exellent Job Brother!😅😅😅
You had me rollin when you broke out the Chanel Locks. Hahaha awww Man.. 😅
God bless you brother!🩸✝️👑
Big shout out to those Channel Locks! Looks like a job well done. Ride Safe.
I converted my 73 XLCH to all LED and I had to replace the flasher unit with one that had a resister built in and it is adjustable to increase or decrease resistance for the signals. I converted my FLSTF to all LED including the signals and I put in a special resister from J&P cycles. I converted to LED to save electricity especially on the Ironhead.
Right on, Paul. I'm thinking of doing the same to the softail.
I just received exact same for my 2012 flhtc this morning installed OMG what an upgrade went out tonight at dark unbelievable
Pretty cool, huh? Made it easier to spot the deer at night while we were in the Ozarks last April.
How's the high beam?
I put RRI led lights in my Nightrain and man. the low beam lights up all 3 lanes of the highway . but if you do the turn signals on the older bikes you need to get a load equalizer so they don't hyper flash.
Looks like the new lights work real good. I had a guy stop me and ask about the lights on my Harley. I never gave the lights much thought until that guy.
Right on
Excellent video I have an 87 heritage does it have the 3way plug or H4? I think it is called
Great job on the trailer can't wait for the premier.
Same led lights as I put on my 2013 ultra classic. Fit great and only took 30 minutes to put in. Awesome lights. Plug and play.
Great deal
I have a single headlamp on my 2006 Fat Boy. I bought a led replacement light that is just a 3-sided little stick light and it also works great. Led is awesome! The first one I bought was for my Sportster and the 2nd one was basically the same light. Cheap too.
I changed to these on my 04 Road King after getting them for Christmas present. Mine are the chrome version and all 3 had comparable plugs. Funny thing I haven’t even ridden at night to try them but I know they’ll be a great upgrade!
I made this upgrade to my '09 electra glide classic a few months ago, well worth it. You'll also notice the LED's are much easier on the charging system than the halogen lamps...
On your 09 what holds the top of the factory trim ring on, with only the bottom screw the top of the trim ring just bounces around on mine.
@@ChewinFat it was a little looser than stock but it wasn’t that loose that bounced around.
That is a BIG DIFFERENCE! Man it is nice when you can see where you are going. Great job your camera woman did tell her to bill you for her work. All the best and Ride Safe
I installed the Ciro-3D Vision-X on my 2020 SGS, alls I could say is WoW, it also makes ya stand out during daylight hrs.
Did all the turn signals also, (LED)
Paid $119 dollars for mine off Amazon. Great product, very easy to install.
Thanks for the Info I just ordered one for the Indian Chieftain.
Right on, man!
WOW! Easy install, nice and bright, and the price is great.
I just bought some off ebay for 58$ they weren't what I'd call plug and play but very bright.they were just labeled 80watt LEDs I ride alot at night and its pardon the pun day and night.
Those are nice I myself got the sunpie set of lights for my heritage, will be installing soon
Good deal, man.
I did the same upgrade to my Heritage Classic and it doubled the light. Were up in the mountains and summer night rides are dangerous up here with Deer wondering along the roadway and jumping out. You probably have the same thig there. It's a safety issue...Good video
I bet it helps
Simple install but it might be to bright idk. Wish I could of made it to the camp out. Hopefully I’ll be back Down your way sooner than later tho.
Looks great Corey! I'm sure you'll enjoy the light level. Cheers! cb
Excellent install vid ! May be worth mentioning, as STS stated, higher wattage LED create more heat. Change OEM plug to ceramic for added heat protection to wiring. RIDE EZ
DAN YOUNG
Incorrect.
no relay needed??? so no wire burn out from exsess heat drawn..? looks great
still waiting for my bike to get home & maybe put a 2nd hand motor in it... cheers..
These draw less power than the old incandescent.
I would really like to see what it looks like in a corner. My ultra limited came with the DayMaker and I hate it because it has a hard cut off line and when leaned over in a corner it gets dark in the direction you are going.
hey the lights look great i bet they will light up the road for sure
They sure will!
nice I definately need an upgrade too, stock head light on 2021 flht dont light up the road for shit i was impressed with big difference these made for you
I just grabbed a set for my Road King. Can’t wait to get them installed and try them out. Great video. Thank you Sir. God bless.
I have been waiting. I don't ride at night much but when caught out after dark I always wish I had more light. I'm ready for a LED
Great video & early review on your new lights.
Thanks for sticking around and watching!
Have you rebuilt a generator on an ironhead? Or do you prefer the alternator swap?
Got them on my 93 90th Edition Classic luv them great for country riding . Luv the Tramp from Barry Nantais windsor Ontario Canada great job . Keep making videos we luv ya.
Thanks, man. 🙂
I have a 93 Heritage and was wondering if they would work, you just answered that question. Thanks
I ride a white 06 road king police with lots of chrome and I like the way those black led lights look, I just can't make up my mind as to order a black or chrome light set. 🤔
I thought you might like those lights!! Good video, looked pretty easy to install. Be good and be safe!!
Awesome 👍,,Walk and Ride in the Light.. Massive Improvement.
My 03 cvo road king came with led lights similar to those....thingsbare brighter than lights on my silverado....definitely a worthy upgrade for someone with stock lights
😂 I had the same reaction just upgraded mine last week. Hell of a difference
The red covering on the butt connectors is a heat shrink material that will shrink
when you heat it and give you a nice strong seal that is some what water proof
I must admit, I was expecting a improvement. But I wasnt expecting sunlight at night☀️☀️☀️ Outstanding Tramp👍
LED lights are amazing! Use next to no juice and give twice as much light! A must have IMO for bikes that get used :)
Totally updated you front end,,,Love the wire crimpers,,,
I think you did a good job. For me personally, I always walk up to the Harley counter at the dealer. And have them instal it. That way it's the best light. And they touched it last. But to each their own. Having proper lighting is key.
I agree... Each to their own.
Just ordered a t-shirt, but as for the lights I've been on the fence myself about them. Though I need to do something as I find myself adding more and more lights to the bike just to remove them a few days later. Can't wait to see what you say in about 6 weeks.
Awesome, thank you!
Just installed mine today, thanks for the video
Awesome! Good deal!
I bought from them on Amazon. I love mine. Only have about 5 miles with it at night though.
the fins are for cooling. led lights get HOT. Im wondering how they will stand up to long duration runs buried in those housings.
We'll see
Those light look 1000% better they are really a nice-looking Set of Lights
I don’t know how I feel about the black tint with chrome beauty rings
Relooking your vids, Cory the Best crimping pliers I've found & used is made by Thomas & Betts, without a doubt, check out your hardware dealer,ask to look at their catalog. Pliers #8 " long, cutter on tip, red connector crimp , then yellow/ larger connector. Not all the lifts that were bought had lights,that fell to our shop.love to you both.
Thanks for the tip!
Hey Dude , God bless ya for the effort but ... Within the cutters you used is a feature on the inward handle side , ie. the half round looking portion of the tool is a crimper to crimp those fasteners with . then use a lighter and meltish the plastic without burning it . it should shrink if its the good stuff . If you start having problems it will be because those plier joints , they work in a pinch but a better connection is needed for the long haul . Peace Brother . Your a blessing
Sorry, for some reason I'm not finding the "link down below" !! Thanks in advance !!!
click the more icon (which is nothing more than the word more) at the end of the standard description up above " an email from a representative from a coma" more. when it opens all the info will be their.
channel locks!!! best wire crimp ever! awesome video, Saddle Tramp.
You are blessed with a great wife my dude. Fun lamp install vid. ...next ...tail light extra lamps. Be seen from behind too and please. :))
As Blackhorse said.i bought the jumper harness so I can run passing lamps with high Beam on. Huge difference from the stock lights. Even daytime people can see you coming. Enjoy. Great video
i need to get one myself, not happy about having to lift the tank to install it tho lol
Greg where did u buy jumper hardness, from the HD dealer?
A friend of mine got it for me and I think it was from Harley.
I'll have to look and see if I have the part number
@@BillyBlaze7 I didn't have to remove tank on my ultra
@@gregmcbee2585 you do on the herritage
Still loving your music selections! LED makes a huge difference, inspires confidence on night rides for me.
Wonder if the come with a daytime strobe mode?
I don't think so
Wow. They work great. I will be getting some. Wow. That company knows how to market.
The other thing you could’ve done other than cut those passing light connectors off and splice them together was just attach spade connectors to the new passing lights adapter wires and then simply plug them together with the factory plugs for the passing lights. Although you’ll probably never do it, you can return everything to factory original
Thanks for the tip.
Hefty heat synchs on the back of those lamps...You notice any excessive heat around headlamp faring edges or back housing of spot lamps? > Have to check out minimum charging system output requirements ..My newest Harley = '87 FLHTC....Probably find an upgrade to charging system output on older models IF needed.
You are gonna love those lights. Same set up on my 97 Heritage including having to splice and crimp the passing lights.
That was a great improvement over the front of the bike, cleaned it up with the dark background of lights, XPCTD really did there home work on plug-n-play for the do it yourself project, Think😂 Bob Vella sponsor a garage build🤷.
I really enjoy your stuff, and yes, what a HUGE difference in your visual, in order to be as safe as possible we all need great lights, front and back.
Stay safe my brother & keep 2 on the ground!
Wow that was a big difference and looked pretty easy to install too.
Sure was. Now I can be seen from space!
Looks great on the bike, like a new machine! Looking forward to the updates on how they hold up.
You and me both!
Just ordered a set for my dads road king hope he likes them, and thank you for the install video, should be a breeze!
Hope you enjoy it!
I have been using the Sunpie brand lights for years on all my many bikes. They are all made in China but i'm comfortable with Sunpie since i've never had a failure. Price is cheap, construction is very good, no failures, turns night to day, what's not to love?
I hear ya, Mike
Pooty nice! I finally upgraded my 93 fxr with an Eagle Lights slim led headlight 5 3/4 & oh my lawd!
Wow, unbelievable! I had a similar experience with my new bike. Was used to shitty halogen for 20 years (it was not great from the getgo). Last year, I upgraded to a new bike and thus LEDs...well, yes, quite the difference.
LOVE the light, Tramp!! I had wanted to put an LED headlamp on my bike awhile back but the shop told me it would pull too much juice and run my Streetglide down. Let me know if you have any trouble with that, please. And yes!! She's a beauty!! Just pack her up and I'll send you the shipping fee!!! LOL (Now you prob won't let me come and visit ya, tho!!)
your mrs. is cool! thank you for all the recording you do.
Our pleasure!
Both you & the Misses , PRAVO !!! & increased peace of mind in the dark .
Place cotton towels over your fender before wrenching.
Love the funky music montage! Now you need the LED turn signals...
You think?
I got them for my bike with the halo so run lights have orange and brights are a white my run lights I had to point downwards and I have to get a new pass through light can wount fit a 4 inch can so I had to tape them in lol
Like those lights, ordering a set for my 06 Deluxe and if I really like them I’ll get a set for my 01 Electra, at 60 I enjoy your channel and keeping it real, good job keep it up.
Just what I have been looking for. Ordered them today. Thanks for the video!
Glad I could help!
Great improvement....thanks for sharing......JB..
have you had a issue with leds interfering with a key fob or radio ? i have a 2010 electra glide and when the passing lamps are on it will screw with the security system and radio goes static
This bike is a 98. Has no fob or security system. I never use the radio either.
Those really light up the road, seen they sent Robin The Lady Biker one for her RK and was equally as bright. I think those make you more visible in day light too, I passed bike other day with LEDs and it was really bright definitely could see it a lot better than the old halogen light. Have fun and be safe.
so happy for you bro, that frosty light you had was worrying me some.
LED lighting is the way to go for sure. on the cheapo versions the usual suspects are fitment issues and sealing issues. usually more in humid places, so if you skate past the humid issues you should be golden.
Another benefit of running LED lighting is a greatly reduced electrical draw on your charging system.
I usually replace all the regular lighting on my bikes to have all led's.
Really happy you got the lights changed and the cost was unbeatable :-)
Can you replace all the lights? Not just the headlights? :-)
@@mhough3 you can
Ordered a set today. Get them tomorrow for my 2009 Road King. Thanks for the reminder. Been on my mind for a while too. 👊🏼
Good deal, Man!