hes reducing the piss out of that ink... hahaha i did the same goofy shit when i ran an MO in the 80.s..i belive i also passed it off as skill "" BLAAAAHAHAHA
5 color 28x40 speedmaster with a perfecting unit . 25yrs 20 as head pressman / supervisor / consulting .ect . Heidelberg makes the best sheetfed presses in the world 🌎 🇺🇸
Thanks 👍👍👍 for you to show us about the best style of the members of the printing on the machine of Germany .. GOD BLESS You all and also Thanks to All of you and this Printer's
I am from Bangladesh i study in graphic Arts Institute of Mohammad pur and i am a student of printing and design department and we are not allowed to use printing offset machine yet thanks for showing us I'll try my best to support you ❤❤
@@OffsetPrinting01 thank you for your reply. 8000sh/h 1page face and back (both side or only one?) And the cost for a printing machine like this, how much it is?
Absolutely. Doing 4 color process on a single color press is tough. Things are always moving around, and the results are often unpredictable. These seem to be ads for a newspaper or something, and I don't think their customer is too picky.
Sheet fed offset printing was my trade started printing around 1984 worked at all kinds of print shops it's a trade that you can take with you almost anywhere and get a job
@@bill4572i'm a graphic student and i worked at a printing company for my intern, i learned how to operate sheet-fed offset and flexographic printing machine, and i can say that i regret studying them😂 it's just too much work for such a little pay, definitely one of the worst jobs out there
Just 30 seconds in and I can already see your 'capable professional worker' making mistake after mistake! First, you don't adjust the ink supply while refilling and the machine is running. The roller takes up too much ink at once, disrupting the coloration! Basic first-year knowledge! Then, you don't add cleaning agents stored in cheap plastic bottles in such a large dose that it overflows. I won't even start on work safety here! You also don't lubricate the inking system when letting it run dry or apply some ink to prevent the ink fountains and roller from wearing out! The way you store the plates is shocking; they won't function properly! Overexposure, etc.! All of this looks VERY unprofessional! Regards, a master printer from Germany.
@@bru6896 That doesn`t change the fact that in the Way this Guy works A: YOu get HP Printer Quality out of a OFFSET Printing Machine and B: You destroy the Machine over time!
Agreed. The way he's doctoring that ink was enough to make me shake my head. We had a can of van son "something" that we called pigeon milk. It always threw off the ink and water balance, but it did thin the ink. I learned to always use the right ink instead of doctoring up a concoction.
Interesting way to ink up with the fountain roler completely dry 😂 your gringing the hello it of that thing doing that with no ink in the well and using a metal ink knife.
@@simondalzell5635 im a 3rd year apprentice, shit job, i operate gto52 and MO and kora and cylinder and platten. There is no future in it, im in Australia aswell
Those fanatics of the digital era have no idea what it really is to work on printing, the amazing engineering behind those machines (very old by the way and still unsurpassed in quality, precision and versatility) and the skill and knowledge required to operate them... Without this, everything would stay on a simple file or would be printed in a shitty digital machine, with a quality much lower, a durability much shorter, only in a very limited collection of lightweight paper and at a very high cost and slow production.
Heidelberg MO 64. Basically an over sized GTO. I started on Kords, then Speedmasters, everything from the old 72 to 102s
You are welcome
hes reducing the piss out of that ink... hahaha i did the same goofy shit when i ran an MO in the 80.s..i belive i also passed it off as skill "" BLAAAAHAHAHA
I started by learning on a GTO and then on an SM42, unbreakable machines. I don't regret that time though hahahah
@@jimhanson6265 Yeah that's what I was thinking, given the no shirt, it must be hot there. Scum anyone?
Running like a King! Old school :)
Yes
🙂 = new;
Nice to see the guards bypassed!
Thanks for comment 🤠
I was thinking the same thing
Boss, we need a new Printer. Machine or Man? Man. Thank The Gods. That is cheaper. Prepare the new Hassan.
5 color 28x40 speedmaster with a perfecting unit . 25yrs 20 as head pressman / supervisor / consulting .ect . Heidelberg makes the best sheetfed presses in the world 🌎 🇺🇸
I had a lot of thrills in the pressroom, but never enough to work with my shirt off. I'm jelly! 😂
😊 I'm Joost, 18 years 'offset'; from full manual to 'electronic-managed'.
Thanks 👍👍👍 for you to show us about the best style of the members of the printing on the machine of Germany ..
GOD BLESS You all and also Thanks to All of you and this Printer's
Where is the College of
Litho Offset Machine Minder or Letter Press Machine Minder Trade
Please Reply 🙏
Great skillset, time and dedication. .thumbs up
I am from Bangladesh i study in graphic Arts Institute of Mohammad pur and i am a student of printing and design department and we are not allowed to use printing offset machine yet thanks for showing us I'll try my best to support you ❤❤
great video..... Iam into letterpress printing but is a great insight to offset printing..... thanks.
You are welcome 🤗. From which country you are watching
Australia….@@OffsetPrinting01
letterpress=boring
@@jerryeinstandig7996 Maybe for you.... each to their own.
Letterpress are for operators who can't run offset! 😂
Very good nice and thanks for the info
Insha’Allah I will finish my book and have it published by such skilled workers on an offset press. You are in Dhaka?
Yes sir 😀
Please, can you tell me the model of newspaper printing machine?
Color Sheet-Fed Offset Printing Machine Heidelberg KORD64Year 1963 - Serial-No. 310417
Size max. 400 x 570mm
Speed max. 8.000sh/h
@@OffsetPrinting01 thank you for your reply. 8000sh/h 1page face and back (both side or only one?) And the cost for a printing machine like this, how much it is?
That is modern. I used to print on a 1906 Heidelberg letter press with a Kluge feed
Good to see safety guards bypassed and in ch is more like a foot took his mates arm out of one of these once as they did the same
Why did you run an extra plate in there?
Brother we don't use extra plate you can watch this video again please 🙏
Don't have any mylar packing to stick under the plate for the blanket cylinder packing? @@OffsetPrinting01
What are you mixing with ink at 0:51?
Thanks for the comment. I mixed kerosene oil for thinness
It's simple kerosine
or?
Kerosene
What fountain solution do you use
Saphira fountain solution
I did 35 years Mainly Heidelberg 102 and 74s
You are welcome 🤗
What model of press and what format?
Heidelberg GTOFP 52 offset printing machine
I think it’s a Heidelberg MO
Heidelberg MO 48x65 cm
To big for any GTO Kaiinselmann is right thats an old MO 64.
its very difficult and miss color if we printing with 1-1 color machine not make 4 color machine like SM 52 heidelberg
A single color isn't a challenge! Try a 10 color....he would be lost for sure!
Absolutely. Doing 4 color process on a single color press is tough. Things are always moving around, and the results are often unpredictable. These seem to be ads for a newspaper or something, and I don't think their customer is too picky.
1990 - still in! now its 106XL 8 color 20000sh/h
Yes sir 😀
Need this guy in my press in the Caribbean
Would you like to employment skilled Yemeni worker in your press he use Heidelberg office printer gto
Printing is a lot higher tech than those machines but the older Heidelberg are a nice machine
Yes sir. Thanks for comment 🤠
Sheet fed offset printing was my trade started printing around 1984 worked at all kinds of print shops it's a trade that you can take with you almost anywhere and get a job
Okay sir 😀
@@bill4572i'm a graphic student and i worked at a printing company for my intern, i learned how to operate sheet-fed offset and flexographic printing machine, and i can say that i regret studying them😂 it's just too much work for such a little pay, definitely one of the worst jobs out there
Currency printing would be interesting
Just 30 seconds in and I can already see your 'capable professional worker' making mistake after mistake! First, you don't adjust the ink supply while refilling and the machine is running. The roller takes up too much ink at once, disrupting the coloration! Basic first-year knowledge! Then, you don't add cleaning agents stored in cheap plastic bottles in such a large dose that it overflows. I won't even start on work safety here! You also don't lubricate the inking system when letting it run dry or apply some ink to prevent the ink fountains and roller from wearing out! The way you store the plates is shocking; they won't function properly! Overexposure, etc.! All of this looks VERY unprofessional! Regards, a master printer from Germany.
It’s an other différent environnement and culture than Europe.
@@bru6896 That doesn`t change the fact that in the Way this Guy works A: YOu get HP Printer Quality out of a OFFSET Printing Machine and B: You destroy the Machine over time!
HP quality printing. Phewwww! GOT ‘EM! 😝
Agreed. The way he's doctoring that ink was enough to make me shake my head. We had a can of van son "something" that we called pigeon milk. It always threw off the ink and water balance, but it did thin the ink. I learned to always use the right ink instead of doctoring up a concoction.
Using a metal applicator you're damaging your press, scoop for scoop.
Please upload a video about ryobi 3200CD.Please........
Ok sir
Mürekkeb haznesine neden sıvı birşey sıktı ? Sıktığı şey nedir ?
When I left school I had to wash these up ,and make the plates
Some engine oil and blod from neighbour...they know how to print😂😂
Goyang terus mang 😅
Thanks 👍
Good job Bhai
Thanks brother 😁. Stay with us
Bhai isi tarah bade 8-10 minat ke video banao
Thik he vai
Good work bro
Thanks 👍👍 brother. Good luck 🍀
Interesting way to ink up with the fountain roler completely dry 😂 your gringing the hello it of that thing doing that with no ink in the well and using a metal ink knife.
Yes sir 😀
That's all we used in the industry! Metal knifes were the best! I hated the plastic ones the ink companies would give for free!
Eleven years in the printing industry was way more than enough for me. It was the pits of a job!!!
Thanks sir 🙏
25 years here. Loved every minute.
15 year with GTO, TOK,
I did 35 Years . Heidelbergs 5col. Rolands 6 Plus coater. It's taken a toll oon me. Shit work
@@simondalzell5635 im a 3rd year apprentice, shit job, i operate gto52 and MO and kora and cylinder and platten. There is no future in it, im in Australia aswell
Those fanatics of the digital era have no idea what it really is to work on printing, the amazing engineering behind those machines (very old by the way and still unsurpassed in quality, precision and versatility) and the skill and knowledge required to operate them... Without this, everything would stay on a simple file or would be printed in a shitty digital machine, with a quality much lower, a durability much shorter, only in a very limited collection of lightweight paper and at a very high cost and slow production.
Thanks brother
where are you from worker？
Want to buy a 2 color dominant or any other machine in good condition any sellers please contact
Nice and squeaky. Give it an oiling!
Thanks bro
Our Press ended up in Pakistan. Was a lot cleaner though.
Thanks 👍
I am looking printing machine operator
Vacancy hai kya apke pas machine operator k liye
Kon se bol rahahu
@@OffsetPrinting01 heidelberg machine pe kam krne k liye vacancy h kya apke pass
Yes apane pass hai vacancy
@@pikusharma970320x30 ka machine aap operate kar paoge ?
I need printing machine operator.
Single colour bar fed MO, this is the Germans getting back at us forWWII.
Yes sir thanks for the comment
Am agualified printer using Heidelberg machines looking for a job connect me please,the video is very much interesting.
Thanks
It's my country, Bangladesh
don't get sick or no machine running
Ok ok ok 👍👌👍👌👍👌❤❤❤
Thanks 👍
I am in Australia…..
You are always welcome brother ❤️
Off set heIdelberg GTO
Yes sir 😀
@@OffsetPrinting01 👍🙂
nop. It's a MO@@OffsetPrinting01
Plastic packing will eat up your cylinders over time. Pressman hustling on that GTO to get something done in this competitive world.
👍👍👍
You are welcome 😁
OMG,они знают,что уже 21-ый век??
That thing can still make money why to go for new ?
This video not an example of the printing industry in America.
I am amachine man in 2024 this line is totaly demage becouse of our low rate.
Learn this job ok , and please don't depend on this job for your life leading. 🙏
Yes sir thank
@@OffsetPrinting01 Iam also offset operator, experience of 20 years, I loss my golden times and energy .
Not in USA! Old machine. No guards. No shirt! Skill ok, but wtf?
It will be dangerous for us. But in India don't care like this. You are welcome to India
No es muy fino ala hora de operar ese tipo de maquinaria
Thanks sir. You are welcome 😁
tight Tight TIGHT!!
I presume no A/C, why this dude has no shirt on!!
Weeding. Card offset printing machine
Yes sir 😀
ভাই
Yes brother
@@OffsetPrinting01Litho Offset Machine Minder se ITI karna hai
Where is the College
Please Reply 🙏
must be hot in there?
Que mala pinta y de paso poco profesional
Hh
Hi