Automatic Wire Stripping Machine - Strip Copper Wire in Seconds!
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Automatic wire stripping machine, very cool gadget that works very well. Can easily strip insulated copper wire to bare bright wire in seconds.
Follow me on instagram @Taco_Stacks
Send me mail if you would like!
Taco Stacks
PO BOX 184
STOCKERTOWN, PA 18083-0184 - บันเทิง
![The Wall Song ร้องข้ามกำแพง | EP.213 | กรีน อัษฎาพร | 3 ต.ค. 67 [1/5]](http://i.ytimg.com/vi/3KrlLbCsadI/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 82 วันนี้!! คู่เอก | ยอดไอคิว vs อับดัลลาห์](http://i.ytimg.com/vi/hSsyTl_9bqs/mqdefault.jpg)
I know times are tough. But I never thought we’d see Taco resort to stripping to make ends meet. 😉
Especially outside in the burning sun!
Strippers make money
@@TacoStacks 💸
LOL!
@@TacoStacks taco stacks as your stripper name could work lol
Thanks to you, I look at scrap wire differently and don't throw it in the trash, but put it in the alley for the scrappers that go by.
thanks, theres a bunch of us out there
Mine is smaller
Thank you!
You are such a knowledgeable young man, and really self motivated. Most ppl your age are stuck on the sofa with a game controller in their hands. My Grandfather was a scrapper as well as my own Father when he had time on his days off.
I sure enjoy your videos 😉
I would say he's a moron
As someone who loves to craft with copper wire... I am envious of what beautiful bare wire came out of the back of that machine!
Hey young Mr Taco Stacks, I wondered about the wire stripper. I hope that you are well and send you love and best wishes. Take care , stay strong and stay safe. Barry from the UK x
So much work goes into it... never knew that...
Nice to see you playing with your fun new toy...but seriously, if this saves you time and makes you a bit more money, then it’s worth the cost.
No it's really not. Way better cheap ones out there.
@@butter7734 Could you possibly name me a few?. TIA..
I have the manual version of this. It's decent but struggles with heavy wire because the wheel design let's it role out. With a rounded bottom design it would be better but all things considered I stripped 1200 or more lbs today. The worst part was having to cut the giant wire casing off by hand because it was just wayyy to big to cut.
I have the same machine and really like it. I've a couple videos on it. Very easy to adjust and so far no issues. I also am not sponsored and have no affiliate links to it on my channel. I paid for it myself and love it.
I have one too, and i hate it. Whenever I try to use it the wire just pops out next to the blade and it doesn't cut. Do you have any advice
@@georgelilly1847 I just had to learn what it could handle and how to tweak it. After a couple years of frustration I invested in a Stripmeister. OMG it is an awesome machine. I have a vid on it.
Good info. 👍 I used to wonder why people wanted to collect wire and then have to strip individual pieces. I am glad you got "the stripper".
I sure wish I had known about this machine before now, because my dad just died after being an electrician for over 50 years, and we had thousands of pounds of copper wire and we couldn’t strip it to make it worth our time by hand. And we knew we couldn’t burn the coating off. So my brother ended up taking it to the scrap yard and getting the money only from the insulated wire. But it sure would’ve gone far toward his estate for 10 kids that he had to leave behind. Thanks for the investment advice!
Another informative video Taco! (Your channel is one of my favs for ideas, information, and motivation!) I'm fairly new to scrapping joy. The biggest struggle is learning what type of metal is what type of scrap. Would be interested in a video (or short series) where you focus on separating the same metal (like ferrous) of different types into separate piles and describe what to call them when dropping them at the scrap yard for the best cash-out. The scrapyard where I go gets irritated when I don't separate the different copper, aluminum, or ferrous correctly. I just learned that painted air vent covers and painted fluorescent light housings when called "chip", fetch a slightly higher value than just dirty metal. This inspired my request...even if someone else has done it, I haven't seen their video, and it would be better to have a Taco Stacks video.
Very cool, didn’t know wire stripping could be interesting. Thanks Taco Stacks. ⭐️
Well that was interesting...Never thought I'd be watching Taco Stacks strip!
Since it’s April 1st the title should’ve been “footage of me stripping!”
lol
Haaa
I quit TH-cam.........
@@TacoStacks awww Taco, that would make me and many others be very sad
Definitely worth the different price between bare wire and insulated wire in my opinion! It might take a couple minutes, but everyone has 30 minutes of time in their week for the difference in price. And by the way I don't mind hearing Salsa getting her drink of water, it's part of the charm of Her! Happy hunting 😊!
Man I got to get me one of those definitely worth it I have spent hundreds of hours with a knife gonna order one now because yesterday a guy was throwing a bunch of wire in the dumpster and he gave me over 100lbs so that will pay for the machine itself. Thanks for the review seems like a great machine for the price.
New housing construction would definitely be a good source of wire. 👍
I just bought the same machine. I removed the switch mount & removed the gear box plug at the top. There was no visible lube so I topped it up with 90 weight gear lube. So I just thought I'd mention that to buyers of these units. .................
Good afternoon to you mr. stacks and queen salsa. Drove to the doctor and we passed as my son says “a taco stacks van” lol. Thanks for the video. Haven’t been feeling too good today and appreciate the distraction. As always glad to see ya and keep on living the dream and stacking!!
I'm so glad you did a video on one of these. I've been wanting to get one for awhile.
Glad I could help!
Really interesting. I can't believe the difference in return when you strip off the casing. Now if they would recycle the rubber and plastic from that it would be great
I am very happy you got that machine without a doubt worth the money
Thanks TACO Mr. Goodguy !!🥰🥰🥰🙏🙏👍✌
At about 4:30 mins in you say the adjustment wanders. That could be because the lock nut is not engaged. It looks like it is up at the top near the the black knob, wind it down and just tighten it to the bottom one just a mall nip with a Spanner / Wrench should help.
The second nut on the adjustment is to lock the adjustment in position. Hope that helps you out.
I’m betting I’m not the only one that’s gonna ask to see the copper trip to the scrap yard. 😂
Wow, that’s a crazy idea! Cool to see it in action, thanks!
Very good informative video. Looks like something also a jewelrymaker could use also. Now I want to buy one!
What a nice wire stripper. Fast work. Great video. Enjoyed.
Great video taco I been looking at a machine like this for ages think you just made my mind up thanks 👍
I waited a long time to get one of these but glad I did. Once you play with it and figure out how to adjust it you’ll be surprised just how much wire you can strip with one of these things. Wish I would’ve got one a lot sooner. Definitely worth it!
Thanks for your scrapping and thrifting info much enjoyed. Always appreciate your videos...ive sold some copper wire because of your channel...have a good one sir
OMG Taco Stacks an easy breezy day. Thanks for the tutorial and demo video. Hugs and kisses for Queen Salsa and Queen Gracie. GREAT VIDEO AND GREAT CONTENT. THUMBS-UP ALWAYS!!!!
Use that top nut for the adjustment knob, and tighten it to the bottom one. It’s a lock nut
I noticed you said you keep having to adjust the blade. I think the second tap on blade adjustment on top of the machine is to lock the blade in place so it doesn't unscrew itself or move while its cutting. I would run the tap down to the bottom one and see if it works better.
Really interesting.Glad to see the sun shining.👍🏼
Great video, very informative. I can see how this machine can pay for itself in no time.
A great video 👍 so very informative. Keep the good work.
Omg! You have your wire stripper 👍👍 right on.
my thoughts is i replace the two bolts on the guid with wing nuts that way it you could easily loose and tighten them w ith your fingers.
Good morning Taco and of course the beautiful Salsa.Wowzer what a slick machine. What's up ! Copper and more Copper. 😀👍🙏Peace
Hey Taco and Salsa.
Landlord did me dirty thank you for the idea
I love this video, if you have alot of wires please male another video and lets stripped more.
Try setting the lock nut on the blade height when you have similar size wire. Might not have to adjust it as often
I use a vegetable peeler works fantastic. Did about 80 pds in a couple days
Same as mine. LIghtening deal on Amazon 79.99 last year
smart business man with multiple sources of income. good video
BBdave has one of those. very cool
Very interesting & informative video. I learned something new and valuable. Thanks Taco!
Informative video👍
So that first con that you said for the backing off, and you have to constantly readjust in order for it to puncture cause sometimes we’ll just have the groove. If you noticed on the handle, there’s a nut at the very top once you find your depth that you’re wanting, you should take the top nut and screw it down all the way to the bottomand tighten it slightly and that way it won’t back out
You should strip the sheathing 1st that way you only adjust for 12 wire and run all 12 then switch to next size. I have the same machine and I will strip up to 16 awg. Only 1 con is that it runs slow. I just cashed in my stock pile back in June 2021 and received $4800.00. It's worth stripping anything 16 awg and bigger. Major score!
hello taco and believe u know who i am? if not i am from dsl beams channel and nice video btw and i am late i think
I want some beer bright copper. 🤣
Better than burning the insulation off at night so the smoke cloud isn't visible.
Pretty sure EPA would like to have a talk with me if they heard that haha
Don't pollute the air to save the world 👍
Some scrap yards won't buy burnt copper.
@@johnnycomelately5914 I found that out at one yard also. I had over 600 lbs. salvaged from an old WWII barracks that we burnt down for a practice burn. Lucky that another would. Good point though.
Nice job!
Neat wire stripper! Excellent!
Very interesting. Enjoyed it 👍😊
Saludos desde Argentina !!! 🙋❤👏👏👏
That's pretty neat!
Desde la comunidad gitana española ,muchas gracias 🙏(Es un chiste rápido )
You are a good teacher.
Holaaa Taco and salsa 🙋🏻♀️😃🤗💕💕👍👍👍
That was very interesting, thank you.👍👏
Very interesting video today!
Great job
Very informative. I appreciate you making this video for us.
I have absolutely no use for that machine at all but I want one so bad. LOL. Really interesting video Taco, thanks. 🐨❤
I thought it looked like Taco was making spagetti.xx
What is the biggest size wire that you could strip with this machine?
My question is whats the smallest gauge of wire u can strip with theis manchine. I want to purchase one but i mainly deal with the smal gauge wire.
I didn't think TH-cam allowed stripping videos. Salsa may get stripped, or clipped, this Summer though. It gets hot in Pennsy for that shaggy coat.
Wear gloves. And guide the wire in so you don’t have to cut wire in pieces.
Great Video!
Thank you man
Very interesting!
Thanks for the info! Do you scrap electric motors too?
Yu got a wire stripper but don't know any thing about wire qauge and machine parts. Life is fun ☺
I got 1700+ videos on TH-cam also, but I know nothing about film editing or actors.
bought one like this without the engine has hand crank, having problem with it blade keeps coming off the wire as it runs through need advice on how to stop that
Good video
i've seen this type compared to others and it doesn't fair as well, the roller design being flawed, it allows the wire to pop out and roll around the blade on some types of wire, other designs keep the wire tight, and the single wire where you said you had to pull it, that shouldn't happen, that means the rollers aren't gripping properly... and the adjustment settings are cumbersome compared to other designs, they're harder to adjust.
Are these machines strong enough to strip double insulated cable
Wow 150.00 is a great price, almost wants me to starting stripping wire.
Thanks man good video I'm ordering one tomorrow
The wire at 10:39 probably just turned black because it got wet and oxidized a bit.. You could just rub it quick with a wire brush and it would brighten up or just ignore it, the metal yard won't be that picky about a tiny bit in a large container of wire. No need to cut it off. They pay different for strand wire vs solid core.
The largest version of this brand has 10 blades side by side . It's around 300 or so but looks well made.
Where can I purchase one of this and how much does it cost?
Hello Taco 🌮. Hello Salsa ❤️
This thing's SUPER QUIET as well. You could run it in your bedroom and not wake a baby... I honestly was really surprised by that.
Will it strip automotive wire. And wire out of washers and dryers. Air conditioners. And extention cords
I m from Canada how can I buy it please
How is your wire stripper holding up? How many hours do you have on it?
How would I go for it if not brand, just typing Automatic wire stripping machine? No brand or model number? Thanks….
Can you alter this machine to cut wire up too 35mm? Any response appreciated!
yes i did with mine
Nice, Taco.
It’s the feed rollers on that machine that are giving you a lot of problems. I have a Stripmeister and it works a lot better than that one. More expensive but it doesn’t take long to get your money out of it. I have had mine for 2 years and haven’t had to change the cutting wheel yet.
My roller and blade are no longer aligned. Any ideas before I send it back? 4 days left for refund.
Please give the suppliers name and price if possible
where do i purchase this stripper and cost please ???
What’s the machine called?
Haw much manny dear?